Unigreen CAMPO 11 - 16 - 22 - 32 manual Washing the Sprayer, Circuit Washer and Tank Washer

Page 19

4.13 WASHING THE SPRAYER

Thoroughly wash the machine after each treatment pumping clean water through the circuit and clean the suction and delivery filters.

Warning: Dirty equipment is very dangerous for the people and environment. Discharging the residues of washing in the environment without taking precautions is forbidden as this pollutes watercourses. Distribute the residues on the treated field.

WARNING: The tank washing is controlled by tap N. 1, premix N. 2 and stirrer N. 3.

4.13.1CIRCUIT WASHER AND TANK WASHER

CAMPO machines can be equipped with with a circuit washer tank (FIG.11). This tank must be filled with clean water and used to rinse the entire circuit including the suction, delivery, pump, pressure regulator, jets and nozzles. Thanks to the practical rotary nozzle it also rinses the inside surfaces of the tank.

NB: To completely clean the tank and the pipes of any residues of the various active principles, we recommend adding 2kg of soda to the washing liquid for every 100 L of water.

At the end of the treatment, wash the circuit and the tank.

This symbol identifies the clean water tank on the machine used to wash the circuit

FIG. N°11

 

B

D

 

A

C

 

a)Stop the diaphragm pump disengaging the power-takeoff.

b)Check you have filled the circuit washer tank (C).

c)Make sure the main control of the pressure regulator is OFF and that all the boom sectors are closed.

d)Turn suction deviator A to the circuit washer position (H2O).

e)Start the diaphragm pump by engaging the power-takeoff.

f)Increase the engine speed until all of the liquid in circuit washer tank C has been sucked up.

g)Turn the diaphragm pump off and turn deviator A to the work position (TANK).

h)Turn the main control to ON, so there is pressure in the circuit.

i)Start the diaphragm pump again and use the tank washing tap (BLUE) on the regulator (or on pump) that supplies jet B.

j)After a few minutes you can close the tank washing tap

k)Distribute the washing residues over a portion of the field where it won’t cause damage.

l)After you have finished washing, stop the diaphragm pump.

NB: at the end of the washing cycle, if there is the risk of frost, pour roughly 500 grams of normal antifreeze for auto vehicles into the tank.

A

Suction deviator Campo 22-32

Tank washing tap

 

(BLUE)

A

Suction deviator Campo 11-16-22E

4.13.2WASHING WITH FULL TANK (OPTIONAL)

CAMPO machines can be equipped with a discharge deviator that makes it possible to wash the pump and circuit even with a full tank.

a)Stop the diaphragm pump by disengaging the power-takeoff.

b)Check that you have filled the circuit washing tank (C).

c)Check that the main control of the pressure regulator is OFF and that all the boom sectors are closed.

d1) Turn discharge deviator S to the WASH position

d)Turn suction deviator A to the circuit washer position (H2O).

e)Start the diaphragm pump by engaging the power-takeoff.

f1) Increase the engine speed until all of the liquid in circuit washer tank C has been sucked up.

g)After 1-2 minutes, turn the main control to ON, so there is pressure in the circuit.

i)Open the section taps to spray the liquid in circuit washer tank C.

k)Distribute the washing residue over a portion of the field where it will not cause damage.

l)After you have finished washing, stop the diaphragm pump.

NOTE: Before using the machine again for spraying, turn taps A and S back to the correct operating position

S

A

Suction and descarge deviators

Campo 22-32

unigreen 19

Page 18 Page 20
Image 19
Page 18 Page 20
Contents 10/2007 USE and Maintenance ManualSummary Hand Lances Hose Reel Maintenance Product Responsibility Unigreen spa is not responsible if GuaranteeComposition of the Manual Improper useKey to the symbols Recommendations Using Chemical ProductsIntended USE Prohibited USEDriving on the Road Machines Designed to be Used only with Clean WaterCharacteristics and Specifications Weather ConditionsStandards of Reference Noise Level of the MachineUSER’S Instructions Description of the Machine Transporting and Moving the Machine Work StationsHand Washing Tanks Preliminary ChecksTractor Coupling Towed Sprayers ParkingStandard Version Elevator Coupling Hook Version Homologated Wheel Spacing AdjustmentParking Foot Cardan Shaft Hydraulic Connection to the DistributorsSuction Filter PumpGeneral Instructions Pressure RegulatorComponents of the Pressure Regulator Control box for Ergo and Remo electrical regulatorsSpraying Computer Optional Premixer on Cover Optional Filling the TankMixing Manual PremixingPressione Premixer on Hopper with TIN Washer OptionalTOP-MIX Premixer for Campo 11-16-22E Optional HOW to USE the LP83 IncorporatorCircuit Washer and Tank Washer Washing the SprayerWashing with Full Tank Optional Indipendent Hydraulic Plant Horizontal Booms for Herbacious CultivationsHydraulic Herbicide Booms Exceed a height of 4 metersSELF-LEVELING Devices AIR-ASSISTED BoomsVariable Geometry Anti-drift nozzles LiftingDescription of Type of Nozzles Fan nozzles=600xQ Useful InformationHand Lances MarkerHose Reel Extraordinary Maintenance MaintenanceProgrammed Maintenance TAB. N Routine MaintenanceElectrical and Electronic Apparatus Waste Eeaw Putting Back Into Service After Winter LayupDemolition and Disposal Materials for DemolitionUnigreen Arancio Orange Verde Green Giallo Yellow BLU Blue Rosso RED TAB.1 Characteristics Nozzles ISORosso RED Marrone Brown TAB.2 Characteristics Nozzles Conical ISOTAB.3-4 Capacity Hand Lances TAB.5-6 Spraying Tables 2500PROBLEMS, Causes and Solutions Table of Programmed Maintenance Operation50 h 300 h TAB a TAB.12A Allowed FittingsTAB.12B Allowed Fittings TAB bIL Polietilene Rotazionale Member of the group
Related manuals
Manual 32 pages 5.67 Kb

CAMPO 11 - 16 - 22 - 32, DSP 11 - 16 - 22 - 32 specifications

Unigreen DSP Series and CAMPO Series are advanced agricultural sprayers designed to meet the evolving needs of modern farming. The Unigreen DSP (Dynamic Spraying Product) models 11, 16, 22, and 32, along with the CAMPO models of the same specifications, are engineered for efficiency, precision, and reliability in crop protection.

One of the key features of the Unigreen DSP models is their innovative spraying technology. Each model is equipped with a high-capacity tank that allows for extended operation without the need for frequent refills. The DSP series incorporates adjustable booms that provide precise application across various crop types. This ensures uniform coverage and minimizes waste, making it an environmentally friendly option for farmers.

The CAMPO series also boasts similar tank capacities and boom adjustments, making them suitable for diverse agricultural applications. Both series offer customizable options, allowing farmers to choose the configuration that best fits their land and crop requirements.

Another standout characteristic of both Unigreen and CAMPO sprayers is their user-friendly interface. Equipped with advanced electronic controls, farmers can easily monitor and adjust spray rates, pressure, and other critical parameters in real time. This technology not only enhances the sprayers' operational efficiency but also aids in achieving the optimum application rates for different pesticides and fertilizers.

Furthermore, both series integrate cutting-edge GPS technology, enabling precision agriculture practices. This feature allows operators to map their fields, ensuring that every inch is accurately treated, while also reducing the possibility of overlap or missed areas. This precision application reduces chemical usage and ultimately leads to cost savings.

Durability is another primary focus in the design of the Unigreen DSP and CAMPO sprayers. Built with high-quality materials that can withstand harsh environmental conditions, these sprayers promise longevity and consistent performance over time.

In summary, Unigreen DSP and CAMPO models 11, 16, 22, and 32 are technologically advanced agricultural sprayers that combine efficiency, precision, and durability. With features such as adjustable booms, advanced electronic controls, and GPS technology, they cater to the diverse needs of today’s farmers, helping to enhance productivity while minimizing environmental impact. These sprayers are positioned to play a pivotal role in the future of sustainable agriculture.
Top Page Image Contents