Unigreen EXPO, SIRIO, serie EOLO, DEVIL, AP APC Treatments on Herbaceous Cultivations, Hand Lances

Page 21

6.4.2 TREATMENTS ON HERBACEOUS CULTIVATIONS

a)Use the tables of pages 31-33 choosing the one relevant to the type of cannon to use and the number of jets.

b)Find the range and the diameter of the nozzles used (ceramic plate or TR nozzles).

c)In the horizontal strip, choose the working speed and the distribution in litres/hectare and on the vertical scale find the pressure to use.

d)Adjust the pressure to obtain the treatment required.

Note: the minimum range indicated in the table can vary significantly according to the adjustment of the single jets (screwed in more or less). To verify the exact delivery of the fan do tests with clean water.

7HAND LANCES

When using hand lances bear in mind the following notes:

=Don’t direct the jet of liquid towards electric power lines or zones where there is electrical current, houses or where people might pass.

=Don’t point the jet at people or animals.

The jet can cause serious injuries simply due to the mechanical force of the liquid under pressure.

=Never block the spraying lever of the lance in an open position because if the lance falls it will be uncontrollable.

=At the end of work after you have stopped the pump, make sure that any residual pressure in the pipes under pressure has been drained to avoid unexpected jets when putting the lance away.

There are various types of lances; with a lever, mitra spray gun and pistol grip. For further information please refer to the handbook in the package.

The lever lance is controlled by opening lever A which, depending on how much it’s pressed, produces a conical spray or direct jet. The standard nozzle is Ø 1.5

The mitra spray gun can produce a direct jet or a conical spray and the type of spray is selected by pushing lever B forwards or backwards. Use lever C to open the jet. The standard nozzle is Ø 2.5

Replacement nozzles are available for all of the lances and the capacities are indicated in the tables TAB.4 and TAB.5 ( page 34).

A

BC

unigreen 21

Page 20 Page 22
Image 21
Page 20 Page 22
Contents 01/2007 USE and Maintenance ManualSummary Treatments on Herbaceous Cultivations Hand Lances MaintenanceComposition of the Manual GuaranteeKey to the symbols Intended USE Using Chemical ProductsProhibited USE RecommendationsWeather Conditions Characteristics and SpecificationsDriving on the Road Tables of Fittings AllowedStandards of Reference Noise Level of the MachineUSER’S Instructions Description of the Machine Hand Washing TanksTowed Atomisers Parking Transporting and Moving the MachineTractor Coupling S 0,2 T x i + Z x d +THREE-POINT Coupling For verification use the formula shown hereCardan Shaft PumpSuction Filter Components Ofthe Pressure Regulator Pressure RegulatorControl box for GCP Elettrico electrical regulators General InstructionsDelivery Filters only Equipped Models Pressure regulators with a volumetric valve GCP ElettricoTest with Clean Water Filling the TankMixing Premixer on Cover Optional Manual PremixingWashing the Atomiser Circuit Washer Andtank WasherBlower Group Axial Blower Group with PulleyAxial Blower Group with Multiplier Blower Group with Front Suction SINGLE-SIDE Blower GroupAxial Rotor Clutch Optional Deflectors and AccessoriesCannon Blower Group Manually Inclinabile HeadLOW Volume Conical Nozzles 150-500L/HA Normal Volume Conical Nozzles Over 500L/HASpraying Description of Type of Jets Description of Type of NozzlesSpeed 6 Km. / h Calibrating Axial FAN AtomisersCalibrating Cannon Atomisers Tables on pages Treatments on Tall PlantsHand Lances Programmed Maintenance MaintenanceRoutine Maintenance Cleaning the NozzlesStorage in a Warehouse and Transportation Putting Back Into Service After Winter LayupDemolition and Disposal Materials for DemolitionCommonly used spare parts TR80-01 Arancio Piastrina ceramica Ø1,0 Piastrina ceramica Ø1,2 Tables for Calibrating Atomisers Ø600-650Tables for Calibrating Atomisers Ø700-750 Tabella erogazione in Litri/ettaro Gr.Ventola Ø800 14 getti Tables for Calibrating Atomisers Ø800Tables for Calibrating Atomisers Ø900 Tables for Calibrating Atomisers Ø650 TGZ Unigreen spaTables for Calibrating Atomisers Ø800 TGZ Tables for Calibrating Cannons Ø450 23 m Tables for Calibrating Cannons Ø400-45530 m 35 mPiastrina ceramica Ø1,8 Piastrina ceramica Ø2 Tables for Calibrating Cannons Ø400-455TILTING Head20 m 36 mPressure 005 0067 015Bar 10 bar 12 bar 15 bar 18 bar 20 barDiameter Nozzle Pressure BAR JET 50 h 300 h Table of Programmed Maintenance OperationTAB.14A Allowed Fittings TAB aTAB.15A Allowed Fittings TAB.16A Allowed Fittings Member of the group

AP APC, DEVIL, serie EOLO, EXPO, SIRIO specifications

Unigreen is recognized for its innovative agricultural machinery, particularly in the realm of spraying technology. Among its flagship products are the SIRIO, EXPO, DEVIL, AP APC, and the EOLO series, each designed to cater to the diverse needs of modern-day farming.

The SIRIO line is particularly lauded for its versatility and efficiency. This series is engineered for precision application, equipped with advanced GPS technology that allows for automatic section control. The ability to adjust spray patterns and flow rates in real-time ensures minimal waste and optimal coverage, which translates to both economic and environmental benefits. Its durable construction also promises longevity, making it a reliable choice for farmers looking for investment-worthy equipment.

The EXPO series is tailored for open-field spraying. It boasts an impressive working width and can cover large areas quickly. The EXPO's multifunctional design includes a user-friendly interface, allowing operators to monitor and adjust performance easily. This model emphasizes user comfort and safety, featuring advanced anti-drip systems to minimize environmental impact during operation.

Next, the DEVIL is particularly noteworthy for its compact design and agility. Ideal for vineyards and orchards, the DEVIL allows for precise application in constrained spaces, facilitating detailed and targeted treatments. Its lightweight build ensures easy maneuverability without sacrificing power, and the robust motor guarantees consistent performance.

The AP APC series stands out for its multi-purpose functionality. This range is designed to perform well under diverse environmental conditions, making it suitable for various crops. The addition of a high-capacity tank allows for extended working hours without frequent refills, enhancing productivity. Furthermore, its low-center-of-gravity design improves stability on uneven terrains.

Lastly, the EOLO series showcases Unigreen's commitment to eco-friendliness. These machines feature low-drift nozzles that keep the chemicals where they are needed most, which helps in minimizing off-target application. The EOLO series also incorporates energy-efficient technologies, reducing fuel consumption and greenhouse gas emissions.

In summary, Unigreen's SIRIO, EXPO, DEVIL, AP APC, and EOLO series represent a blend of innovation, efficiency, and environmental responsibility. Each model is designed to meet the specific requirements of various agricultural environments, ensuring that farmers can operate at peak efficiency while contributing to sustainable farming practices.
Top Page Image Contents