Unigreen DEVIL, SIRIO, EXPO Noise Level of the Machine, Standards of Reference, Hand Washing Tanks

Page 8

 

This symbol identifies

 

the clean water tank on

8 unigreen

the machine used to

wash your hands

3.2NOISE LEVEL OF THE MACHINE

Use earmuffs to protect your ears when using the machine, below you will find the data on the maximum noise levels during work.

Atomisers with axial fan rotor

ACOUSTIC POWER LEVEL emitted by the machine with axial fan rotor: 113.5 and 118.5 dBA respectively in 1st and 2nd gear

ACOUSTIC POWER LEVEL AT THE OPERATOR’S POSITION emitted by the machine with axial fan rotor: 89.0 and 89.5 dBA respectively in 1st and 2nd gear

Atomisers with centrifugal fan rotor (cannon)

ACOUSTIC POWER LEVEL emitted by the machine with axial fan rotor: 111.5 and 117.0 dBA respectively in 1st and 2nd gear

ACOUSTIC POWER LEVEL AT THE OPERATOR’S POSITION emitted by the machine with axial fan rotor: 94.0 and 97.0 dBA respectively in 1st and 2nd gear

Readings taken in accordance with the following standards: Machines Directive 98/37/CE (89/392 CE Dir. re-codified).

Legislative Decree D.Lgs. n°292 of the 4th of September 2002 concerning the environmental acoustic emission of machines and equipment for use outdoors. Legislative Decree D.Lgs. 277/91 on the subject of the protection of workers against the risks deriving from exposure to chemical, physical and biological agents.

3.3STANDARDS OF REFERENCE:

-MACHINES DIRECTIVE 98/37/CEE (89/392 CE Dir. re-codified).

-Directive 86/188/CEE: risks deriving from exposure to noise (implemented in Italy by Legislative Decree D.L 277/1991)

-DPR 547/1955: Regulations for the prevention of accidents and hygiene at work.

-Legislative Decree D.Lgs. n°292 of the 4th of September 2002 concerning the environmental acoustic emission of machines and equipment for use outdoors. -UNI EN ISO 12100-1/Apr.2005 : Machinery safety - Fundamental concepts, general design principles - Part 1: basic terminology, methodology

-UNI EN ISO 12100-2/Apr.2005 : Machinery safety - Fundamental concepts,

general design principles - Part 2: Technical principles

-UNI EN 294/July 1993: Machinery safety, safe distances to avoid reaching hazardous areas with upper limbs.

-UNI EN 349/June 1994: Machinery safety, minimum spaces to prevent crushing of body parts

-UNI EN 907/Nov.1998: Agricultural and forestry machinery - Sprayers and spreaders of liquid fertilizers - Safety.

-UNI EN 954-1/Dec. 1998 : Machinery safety - Fundamental concepts, general design principles

-UNI EN 982/July 1997: Machinery safety. Safety requisites relevant to systems and their components for hydraulic and pneumatic transmissions. Hydraulics. -UNI EN ISO 4254-1/June 2006: Agricultural machines - Safety - Part 1: General requisites

-ISO 11684/1995: Pictograms - general principles.

4USER’S INSTRUCTIONS

4.1DESCRIPTION OF THE MACHINE

The atomisers consist of a structural steel frame and a polyester tank reinforced with fibreglass or high-density polyethylene. The frame is hot- galvanised. The tank is easy to empty and this makes it possible to use the machine even on hillsides.

The pumps are generally diaphragm pumps but in some cases they are fitted with pistons.

The accessories for completing the fitting, non-drip jets and ceramic nozzles make the UNIGREEN atomiser a highly qualified and efficient piece of equipment.

4.1.1 HAND WASHING TANKS

The atomisers are supplied with an auxiliary hand-washing tank with clean water and a hand tap.

This tank must always be supplied with water and the inside must be clean so you can wash any parts of the body that come into contact with the chemical product used.

Never drink the liquid inside.

4.2PRELIMINARY CHECKS

Page 7 Page 9
Image 8
Page 7 Page 9
Contents USE and Maintenance Manual 01/2007Summary Hand Lances Maintenance Treatments on Herbaceous CultivationsGuarantee Composition of the ManualKey to the symbols Using Chemical Products Intended USEProhibited USE RecommendationsCharacteristics and Specifications Weather ConditionsDriving on the Road Tables of Fittings AllowedNoise Level of the Machine Standards of ReferenceUSER’S Instructions Description of the Machine Hand Washing TanksTransporting and Moving the Machine Towed Atomisers ParkingS 0,2 T x i + Z x d + Tractor CouplingTHREE-POINT Coupling For verification use the formula shown hereSuction Filter Cardan ShaftPump Pressure Regulator Components Ofthe Pressure RegulatorControl box for GCP Elettrico electrical regulators General InstructionsPressure regulators with a volumetric valve GCP Elettrico Delivery Filters only Equipped ModelsMixing Test with Clean WaterFilling the Tank Manual Premixing Premixer on Cover OptionalWashing the Atomiser Circuit Washer Andtank WasherAxial Blower Group with Multiplier Blower GroupAxial Blower Group with Pulley Axial Rotor Blower Group with Front SuctionSINGLE-SIDE Blower Group Optional Deflectors and Accessories ClutchCannon Blower Group Manually Inclinabile HeadNormal Volume Conical Nozzles Over 500L/HA LOW Volume Conical Nozzles 150-500L/HASpraying Description of Type of Jets Description of Type of NozzlesCalibrating Axial FAN Atomisers Speed 6 Km. / hCalibrating Cannon Atomisers Tables on pages Treatments on Tall PlantsHand Lances Maintenance Programmed MaintenanceRoutine Maintenance Cleaning the NozzlesPutting Back Into Service After Winter Layup Storage in a Warehouse and TransportationDemolition and Disposal Materials for DemolitionCommonly used spare parts TR80-01 Arancio Tables for Calibrating Atomisers Ø600-650 Piastrina ceramica Ø1,0 Piastrina ceramica Ø1,2Tables for Calibrating Atomisers Ø700-750 Tables for Calibrating Atomisers Ø800 Tabella erogazione in Litri/ettaro Gr.Ventola Ø800 14 gettiTables for Calibrating Atomisers Ø900 Tables for Calibrating Atomisers Ø800 TGZ Tables for Calibrating Atomisers Ø650 TGZUnigreen spa Tables for Calibrating Cannons Ø450 Tables for Calibrating Cannons Ø400-455 23 m30 m 35 mTables for Calibrating Cannons Ø400-455TILTING Head Piastrina ceramica Ø1,8 Piastrina ceramica Ø220 m 36 m005 0067 015 PressureBar 10 bar 12 bar 15 bar 18 bar 20 barDiameter Nozzle Pressure BAR JET Table of Programmed Maintenance Operation 50 h 300 hTAB a TAB.14A Allowed FittingsTAB.15A Allowed Fittings TAB.16A Allowed Fittings Member of the group

AP APC, DEVIL, serie EOLO, EXPO, SIRIO specifications

Unigreen is recognized for its innovative agricultural machinery, particularly in the realm of spraying technology. Among its flagship products are the SIRIO, EXPO, DEVIL, AP APC, and the EOLO series, each designed to cater to the diverse needs of modern-day farming.

The SIRIO line is particularly lauded for its versatility and efficiency. This series is engineered for precision application, equipped with advanced GPS technology that allows for automatic section control. The ability to adjust spray patterns and flow rates in real-time ensures minimal waste and optimal coverage, which translates to both economic and environmental benefits. Its durable construction also promises longevity, making it a reliable choice for farmers looking for investment-worthy equipment.

The EXPO series is tailored for open-field spraying. It boasts an impressive working width and can cover large areas quickly. The EXPO's multifunctional design includes a user-friendly interface, allowing operators to monitor and adjust performance easily. This model emphasizes user comfort and safety, featuring advanced anti-drip systems to minimize environmental impact during operation.

Next, the DEVIL is particularly noteworthy for its compact design and agility. Ideal for vineyards and orchards, the DEVIL allows for precise application in constrained spaces, facilitating detailed and targeted treatments. Its lightweight build ensures easy maneuverability without sacrificing power, and the robust motor guarantees consistent performance.

The AP APC series stands out for its multi-purpose functionality. This range is designed to perform well under diverse environmental conditions, making it suitable for various crops. The addition of a high-capacity tank allows for extended working hours without frequent refills, enhancing productivity. Furthermore, its low-center-of-gravity design improves stability on uneven terrains.

Lastly, the EOLO series showcases Unigreen's commitment to eco-friendliness. These machines feature low-drift nozzles that keep the chemicals where they are needed most, which helps in minimizing off-target application. The EOLO series also incorporates energy-efficient technologies, reducing fuel consumption and greenhouse gas emissions.

In summary, Unigreen's SIRIO, EXPO, DEVIL, AP APC, and EOLO series represent a blend of innovation, efficiency, and environmental responsibility. Each model is designed to meet the specific requirements of various agricultural environments, ensuring that farmers can operate at peak efficiency while contributing to sustainable farming practices.
Top Page Image Contents