Unigreen EXPO, SIRIO, DEVIL Intended USE, Prohibited USE, Using Chemical Products, Recommendations

Page 6

2.1INTENDED USE

The sprayer in this series is built for agricultural use. The materials used are resistant to normal chemical products used in agricultural spraying (or herbicides) at the time of construction.

Any other use is not allowed and the manufacturer is not responsible for any damage caused by aggressive, dense or sticky chemicals.

THE USE OF THE MACHINE BY PERSONS UNDER 18 YEARS OF AGE IS STRICTLY FORBIDDEN

The use of liquid fertilizers in suspension is not allowed, while the use of the same in a solution is possible if requested when the machine is ordered from Unigreen and in any case changing some of the parts described in the handbooks of the regulator, such as the manometer (stainless steel), the nozzles (large diameter ceramic) and eliminating the fine mesh filters to prevent blockages.

2.2PROHIBITED USE

Using the machine with the following products is strictly forbidden:

=Paints of any kind and type

=Solvents or thinners for paints of any kind and type

=Combustibles or lubricants of any kind and type

=LPG or gas of any kind and type

=Flammable liquids of any kind and type

=Liquid foodstuffs, whether for animals or humans

=Liquids containing granules or consistent solids

=Mixtures of various incompatible chemical products

=Liquid fertilizer or manure in suspension with lumps and/or that is particularly dense

=Liquids with a temperature of over 40°C

=Any products that aren’t suitable for the specific use of the machine.

2.3USING CHEMICAL PRODUCTS

All pesticides or herbicides can be dangerous to humans and the environment if used erroneously or inadvertently.

Therefore we recommend that only suitably trained persons should use these products (license) and in any case only after having carefully read the instructions on the container.

2.3.1REGULATIONS FORTHE USE OF CHEMICAL PRODUCTS Some recommendations for avoiding damage and accidents:

=Keep the machine in a suitable, protected place with no access for children or strangers

=Handle the products with care, wearing rubber acid-proof gloves, goggles- face masks or filtering helmets, overalls made of water-repellent fabrics or TIVEK and boots made of rubber or similar materials.

=If chemical products or mixtures of product come into contact with the eyes or are swallowed consult a doctor immediately, taking the label of the product with you.

=Wash all clothes that come into contact with the chemical, whether diluted or undiluted, thoroughly before using them again.

=Don’t smoke, drink or eat when preparing or spraying the mix or near or in the fields treated.

=DON’T ENTER THE TANK: the residues of a chemical product can cause poisoning and suffocation.

=When spraying, respect safe distances from residential areas, water courses, roads, sports centres and public parks or paths.

=Thoroughly wash the containers of plant protection products using the relevant accessories, rinsing several times with clean water. The liquids used for washing can be used for treatment.

=Collect the washed containers and send them to the relevant collection centres. Never dispose of them in the environment and don’t use them again for any other purpose. It is good practice to knock a hole in the bottom of the tins so they can’t be used again.

=When you have finished spraying, wash the sprayer thoroughly, diluting the residues with a quantity of water at least 10 times that of the residues, spraying the resulting mix over the treated field.

2.4RECOMMENDATIONS

a)Follow the instructions in this manual for the use and maintenance of the frame, tank, multiplier, blower groups and cannon.

6unigreen

Image 6
Contents USE and Maintenance Manual 01/2007Summary Hand Lances Maintenance Treatments on Herbaceous CultivationsGuarantee Composition of the ManualKey to the symbols Prohibited USE Using Chemical ProductsIntended USE RecommendationsDriving on the Road Characteristics and SpecificationsWeather Conditions Tables of Fittings AllowedUSER’S Instructions Description of the Machine Noise Level of the MachineStandards of Reference Hand Washing TanksTransporting and Moving the Machine Towed Atomisers ParkingTHREE-POINT Coupling S 0,2 T x i + Z x d +Tractor Coupling For verification use the formula shown hereCardan Shaft PumpSuction Filter Control box for GCP Elettrico electrical regulators Pressure RegulatorComponents Ofthe Pressure Regulator General InstructionsPressure regulators with a volumetric valve GCP Elettrico Delivery Filters only Equipped ModelsTest with Clean Water Filling the TankMixing Washing the Atomiser Manual PremixingPremixer on Cover Optional Circuit Washer Andtank WasherBlower Group Axial Blower Group with PulleyAxial Blower Group with Multiplier Blower Group with Front Suction SINGLE-SIDE Blower GroupAxial Rotor Cannon Blower Group Optional Deflectors and AccessoriesClutch Manually Inclinabile HeadSpraying Description of Type of Jets Normal Volume Conical Nozzles Over 500L/HALOW Volume Conical Nozzles 150-500L/HA Description of Type of NozzlesCalibrating Cannon Atomisers Tables on pages Calibrating Axial FAN AtomisersSpeed 6 Km. / h Treatments on Tall PlantsHand Lances Routine Maintenance MaintenanceProgrammed Maintenance Cleaning the NozzlesDemolition and Disposal Putting Back Into Service After Winter LayupStorage in a Warehouse and Transportation Materials for DemolitionCommonly used spare parts TR80-01 Arancio Tables for Calibrating Atomisers Ø600-650 Piastrina ceramica Ø1,0 Piastrina ceramica Ø1,2Tables for Calibrating Atomisers Ø700-750 Tables for Calibrating Atomisers Ø800 Tabella erogazione in Litri/ettaro Gr.Ventola Ø800 14 gettiTables for Calibrating Atomisers Ø900 Tables for Calibrating Atomisers Ø650 TGZ Unigreen spaTables for Calibrating Atomisers Ø800 TGZ Tables for Calibrating Cannons Ø450 30 m Tables for Calibrating Cannons Ø400-45523 m 35 m20 m Tables for Calibrating Cannons Ø400-455TILTING HeadPiastrina ceramica Ø1,8 Piastrina ceramica Ø2 36 mBar 10 bar 12 bar 15 bar 18 bar 005 0067 015Pressure 20 barDiameter Nozzle Pressure BAR JET Table of Programmed Maintenance Operation 50 h 300 hTAB a TAB.14A Allowed FittingsTAB.15A Allowed Fittings TAB.16A Allowed Fittings Member of the group

AP APC, DEVIL, serie EOLO, EXPO, SIRIO specifications

Unigreen is recognized for its innovative agricultural machinery, particularly in the realm of spraying technology. Among its flagship products are the SIRIO, EXPO, DEVIL, AP APC, and the EOLO series, each designed to cater to the diverse needs of modern-day farming.

The SIRIO line is particularly lauded for its versatility and efficiency. This series is engineered for precision application, equipped with advanced GPS technology that allows for automatic section control. The ability to adjust spray patterns and flow rates in real-time ensures minimal waste and optimal coverage, which translates to both economic and environmental benefits. Its durable construction also promises longevity, making it a reliable choice for farmers looking for investment-worthy equipment.

The EXPO series is tailored for open-field spraying. It boasts an impressive working width and can cover large areas quickly. The EXPO's multifunctional design includes a user-friendly interface, allowing operators to monitor and adjust performance easily. This model emphasizes user comfort and safety, featuring advanced anti-drip systems to minimize environmental impact during operation.

Next, the DEVIL is particularly noteworthy for its compact design and agility. Ideal for vineyards and orchards, the DEVIL allows for precise application in constrained spaces, facilitating detailed and targeted treatments. Its lightweight build ensures easy maneuverability without sacrificing power, and the robust motor guarantees consistent performance.

The AP APC series stands out for its multi-purpose functionality. This range is designed to perform well under diverse environmental conditions, making it suitable for various crops. The addition of a high-capacity tank allows for extended working hours without frequent refills, enhancing productivity. Furthermore, its low-center-of-gravity design improves stability on uneven terrains.

Lastly, the EOLO series showcases Unigreen's commitment to eco-friendliness. These machines feature low-drift nozzles that keep the chemicals where they are needed most, which helps in minimizing off-target application. The EOLO series also incorporates energy-efficient technologies, reducing fuel consumption and greenhouse gas emissions.

In summary, Unigreen's SIRIO, EXPO, DEVIL, AP APC, and EOLO series represent a blend of innovation, efficiency, and environmental responsibility. Each model is designed to meet the specific requirements of various agricultural environments, ensuring that farmers can operate at peak efficiency while contributing to sustainable farming practices.