Unigreen SIRIO, EXPO, serie EOLO, DEVIL, AP APC manual Key to the symbols

Page 5

1

2

3

4

5

7

8

9

10

11

13

14

15

16

17

19

20

21

22

6Key to the symbols

1- Read the Use and Maintenance manual

2- Stop the machine and read the manual before every intervention

3- Don’t lubricate while running

4- Don’t drink

5- Don’t dispose of residue liquids in the environment

6- No smoking

127- Danger, risk or injury, don’t get near the machine until the moving machine members have stopped

8- Danger of crushing, don’t get your hands near the moving mechanical machine members

9- Danger, risk or injury caused by fluids under pressure

10- Don’t climb on the machine during work or

18transfers

11- Don’t climb on the tank

12- Don’t enter in the tank

13- Wearing earmuffs is obligatory

14- Wearing a face mask is obligatory

15- Wearing safety footwear is obligatory

16- Wearing protective gloves is obligatory

17- Wearing protective overalls is obligatory

18- Use a working pressure under that indicated in red on the manometer.

19- Don’t get your hands near the moving cardan shaft

20- Make sure power-takeoff of the tractor turns in the right direction and runs at the right speed. 21- Don’t remove the protecting device with fan moving.

22- Material shooting off the machine, stand at a safe distance.

2SAFETY REGULATIONS AND RESIDUAL RISKS In relation to safety, the following terms will be used:

Dangerous zones: any zone inside and/or near the machine where the pres- ence of a person exposed constitutes a risk for the safety and health of the same person.

Person exposed: any person who has their body or any part of their body in a dangerous zone.

Before starting the machine, the operator must check for any visible faults in the safety devices and the machine itself.

Never start the machine until you have told anyone in the range of action of the machine to move away and they have done so.

The protective devices must not be removed or disabled when the machine is running.

It is obligatory to keep all the plates with danger and safety signs in perfect conditions. If they get damaged or deteriorate, replace them in good time. Replace parts believed to be faulty with others indicated by UNIGREEN. NEVER try makeshift or hazardous solutions.

Don’t wear clothes, jewellery, accessories, or anything else that can get caught in the moving machine members.

Pay the greatest attention to all the warning and danger signs on the machine. Don’t use the machine for any other purpose other than that indicated in the manual.

The machine has been designed and built with the appropriate devices to guar- antee the safety of the user.

In any case there are some residual risks associated with the improper use of the machine by the operator; for this purpose danger signs and symbols and prohibitions are applied near some parts of the machine (see previous pictograms).

FIG.1

da1 a 18

21+22

19+20

INDICATIVE POSITION

OF THE WARNING SIGNS ON THE ATOMISER NB: the position may vary on the basis of the characteristics of the model.

unigreen 5

Page 4 Page 6
Image 5
Page 4 Page 6
Contents 01/2007 USE and Maintenance ManualSummary Treatments on Herbaceous Cultivations Hand Lances MaintenanceComposition of the Manual GuaranteeKey to the symbols Intended USE Using Chemical ProductsProhibited USE RecommendationsWeather Conditions Characteristics and SpecificationsDriving on the Road Tables of Fittings AllowedStandards of Reference Noise Level of the MachineUSER’S Instructions Description of the Machine Hand Washing TanksTowed Atomisers Parking Transporting and Moving the MachineTractor Coupling S 0,2 T x i + Z x d +THREE-POINT Coupling For verification use the formula shown hereSuction Filter Cardan ShaftPump Components Ofthe Pressure Regulator Pressure RegulatorControl box for GCP Elettrico electrical regulators General InstructionsDelivery Filters only Equipped Models Pressure regulators with a volumetric valve GCP ElettricoMixing Test with Clean WaterFilling the Tank Premixer on Cover Optional Manual PremixingWashing the Atomiser Circuit Washer Andtank WasherAxial Blower Group with Multiplier Blower GroupAxial Blower Group with Pulley Axial Rotor Blower Group with Front SuctionSINGLE-SIDE Blower Group Clutch Optional Deflectors and AccessoriesCannon Blower Group Manually Inclinabile HeadLOW Volume Conical Nozzles 150-500L/HA Normal Volume Conical Nozzles Over 500L/HASpraying Description of Type of Jets Description of Type of NozzlesSpeed 6 Km. / h Calibrating Axial FAN AtomisersCalibrating Cannon Atomisers Tables on pages Treatments on Tall PlantsHand Lances Programmed Maintenance MaintenanceRoutine Maintenance Cleaning the NozzlesStorage in a Warehouse and Transportation Putting Back Into Service After Winter LayupDemolition and Disposal Materials for DemolitionCommonly used spare parts TR80-01 Arancio Piastrina ceramica Ø1,0 Piastrina ceramica Ø1,2 Tables for Calibrating Atomisers Ø600-650Tables for Calibrating Atomisers Ø700-750 Tabella erogazione in Litri/ettaro Gr.Ventola Ø800 14 getti Tables for Calibrating Atomisers Ø800Tables for Calibrating Atomisers Ø900 Tables for Calibrating Atomisers Ø800 TGZ Tables for Calibrating Atomisers Ø650 TGZUnigreen spa Tables for Calibrating Cannons Ø450 23 m Tables for Calibrating Cannons Ø400-45530 m 35 mPiastrina ceramica Ø1,8 Piastrina ceramica Ø2 Tables for Calibrating Cannons Ø400-455TILTING Head20 m 36 mPressure 005 0067 015Bar 10 bar 12 bar 15 bar 18 bar 20 barDiameter Nozzle Pressure BAR JET 50 h 300 h Table of Programmed Maintenance OperationTAB.14A Allowed Fittings TAB aTAB.15A Allowed Fittings TAB.16A Allowed Fittings Member of the group

AP APC, DEVIL, serie EOLO, EXPO, SIRIO specifications

Unigreen is recognized for its innovative agricultural machinery, particularly in the realm of spraying technology. Among its flagship products are the SIRIO, EXPO, DEVIL, AP APC, and the EOLO series, each designed to cater to the diverse needs of modern-day farming.

The SIRIO line is particularly lauded for its versatility and efficiency. This series is engineered for precision application, equipped with advanced GPS technology that allows for automatic section control. The ability to adjust spray patterns and flow rates in real-time ensures minimal waste and optimal coverage, which translates to both economic and environmental benefits. Its durable construction also promises longevity, making it a reliable choice for farmers looking for investment-worthy equipment.

The EXPO series is tailored for open-field spraying. It boasts an impressive working width and can cover large areas quickly. The EXPO's multifunctional design includes a user-friendly interface, allowing operators to monitor and adjust performance easily. This model emphasizes user comfort and safety, featuring advanced anti-drip systems to minimize environmental impact during operation.

Next, the DEVIL is particularly noteworthy for its compact design and agility. Ideal for vineyards and orchards, the DEVIL allows for precise application in constrained spaces, facilitating detailed and targeted treatments. Its lightweight build ensures easy maneuverability without sacrificing power, and the robust motor guarantees consistent performance.

The AP APC series stands out for its multi-purpose functionality. This range is designed to perform well under diverse environmental conditions, making it suitable for various crops. The addition of a high-capacity tank allows for extended working hours without frequent refills, enhancing productivity. Furthermore, its low-center-of-gravity design improves stability on uneven terrains.

Lastly, the EOLO series showcases Unigreen's commitment to eco-friendliness. These machines feature low-drift nozzles that keep the chemicals where they are needed most, which helps in minimizing off-target application. The EOLO series also incorporates energy-efficient technologies, reducing fuel consumption and greenhouse gas emissions.

In summary, Unigreen's SIRIO, EXPO, DEVIL, AP APC, and EOLO series represent a blend of innovation, efficiency, and environmental responsibility. Each model is designed to meet the specific requirements of various agricultural environments, ensuring that farmers can operate at peak efficiency while contributing to sustainable farming practices.
Top Page Image Contents