Unigreen AP APC, SIRIO, EXPO, DEVIL Transporting and Moving the Machine, Towed Atomisers Parking

Page 9

When you receive the machine, check that it is complete and no parts are missing.

If there are any damaged parts, inform your local reseller or UNIGREEN directly in good time.

When the machine is delivered, make sure you ask:

a)that the machine is delivered with all of its parts fitted and that the fitting meets the requisites in table N° 14b-15b-16b (pages 37, 38, 39).

This procedure is necessary because for reasons of space during transportation the machine is often delivered partially dismantled.

b)that it is tested in your presence in particular checking:

=that the suction filter and the inside of the tank are clean and free of work residues.

=that the connections are made correctly following the basic layout (FIG. N° 16, page 15).

=that the hose clips and all the unions and connections are tightened properly.

=that all of the protective covers are fitted solidly to the machine, in particular the protective cover of the power-takeoff of the pump.

=that the multiplier is sufficiently supplied with lubricant oil.

=that the zone where the fan turns hasn’t been bent by knocks during transportation.

4.3TRANSPORTING AND MOVING THE MACHINE

Every time you have to lift the machine, before starting the operation, always make sure the lifting gear and the relevant tools and equipment (cables, hooks, etc..) are suitable for lifting the load and check the stability of the same.

It is forbidden to unhook and move the machine with the tank full. The dry weight of the machine at the maximum level of fitting and with all the accessories allowed is stamped on the nameplate; use slings and lifting gear with a adequate load-bearing capacity (FIG.3).

Never lift or move the atomisers by hand if there is liquid in the tank. The machine will weigh more and the movement of the liquid can change the centre of gravity causing uncontrolled movements.

We recommend using slings as shown in the figure, the lifting points to use on the machine are indicated with the relevant symbol.

Don’t lift the machine with the forks of a forklift truck because the machine can tip over due to the overhanging weight of the blower group.

Don’t pass or stand under the machine when it is being lifted.

4.3.1TOWED ATOMISERS PARKING

Don’t stand the atomiser on unstable ground or steep slopes, the machine is designed to be parked safely on compact ground with a slope of up to 8.5°

MOVING

To lift the machine, follow the instructions above.

This symbol identifies the coupling points of the machine

FIG.3

Only move and lift the machine with the tank empty

unigreen 9

Page 8 Page 10
Image 9
Page 8 Page 10
Contents 01/2007 USE and Maintenance ManualSummary Treatments on Herbaceous Cultivations Hand Lances MaintenanceComposition of the Manual GuaranteeKey to the symbols Intended USE Using Chemical ProductsProhibited USE RecommendationsWeather Conditions Characteristics and SpecificationsDriving on the Road Tables of Fittings AllowedStandards of Reference Noise Level of the MachineUSER’S Instructions Description of the Machine Hand Washing TanksTowed Atomisers Parking Transporting and Moving the MachineTractor Coupling S 0,2 T x i + Z x d +THREE-POINT Coupling For verification use the formula shown hereCardan Shaft PumpSuction Filter Components Ofthe Pressure Regulator Pressure RegulatorControl box for GCP Elettrico electrical regulators General InstructionsDelivery Filters only Equipped Models Pressure regulators with a volumetric valve GCP ElettricoTest with Clean Water Filling the TankMixing Premixer on Cover Optional Manual PremixingWashing the Atomiser Circuit Washer Andtank WasherBlower Group Axial Blower Group with PulleyAxial Blower Group with Multiplier Blower Group with Front Suction SINGLE-SIDE Blower GroupAxial Rotor Clutch Optional Deflectors and AccessoriesCannon Blower Group Manually Inclinabile HeadLOW Volume Conical Nozzles 150-500L/HA Normal Volume Conical Nozzles Over 500L/HASpraying Description of Type of Jets Description of Type of NozzlesSpeed 6 Km. / h Calibrating Axial FAN AtomisersCalibrating Cannon Atomisers Tables on pages Treatments on Tall PlantsHand Lances Programmed Maintenance MaintenanceRoutine Maintenance Cleaning the NozzlesStorage in a Warehouse and Transportation Putting Back Into Service After Winter LayupDemolition and Disposal Materials for DemolitionCommonly used spare parts TR80-01 Arancio Piastrina ceramica Ø1,0 Piastrina ceramica Ø1,2 Tables for Calibrating Atomisers Ø600-650Tables for Calibrating Atomisers Ø700-750 Tabella erogazione in Litri/ettaro Gr.Ventola Ø800 14 getti Tables for Calibrating Atomisers Ø800Tables for Calibrating Atomisers Ø900 Tables for Calibrating Atomisers Ø650 TGZ Unigreen spaTables for Calibrating Atomisers Ø800 TGZ Tables for Calibrating Cannons Ø450 23 m Tables for Calibrating Cannons Ø400-45530 m 35 mPiastrina ceramica Ø1,8 Piastrina ceramica Ø2 Tables for Calibrating Cannons Ø400-455TILTING Head20 m 36 mPressure 005 0067 015Bar 10 bar 12 bar 15 bar 18 bar 20 barDiameter Nozzle Pressure BAR JET 50 h 300 h Table of Programmed Maintenance OperationTAB.14A Allowed Fittings TAB aTAB.15A Allowed Fittings TAB.16A Allowed Fittings Member of the group

AP APC, DEVIL, serie EOLO, EXPO, SIRIO specifications

Unigreen is recognized for its innovative agricultural machinery, particularly in the realm of spraying technology. Among its flagship products are the SIRIO, EXPO, DEVIL, AP APC, and the EOLO series, each designed to cater to the diverse needs of modern-day farming.

The SIRIO line is particularly lauded for its versatility and efficiency. This series is engineered for precision application, equipped with advanced GPS technology that allows for automatic section control. The ability to adjust spray patterns and flow rates in real-time ensures minimal waste and optimal coverage, which translates to both economic and environmental benefits. Its durable construction also promises longevity, making it a reliable choice for farmers looking for investment-worthy equipment.

The EXPO series is tailored for open-field spraying. It boasts an impressive working width and can cover large areas quickly. The EXPO's multifunctional design includes a user-friendly interface, allowing operators to monitor and adjust performance easily. This model emphasizes user comfort and safety, featuring advanced anti-drip systems to minimize environmental impact during operation.

Next, the DEVIL is particularly noteworthy for its compact design and agility. Ideal for vineyards and orchards, the DEVIL allows for precise application in constrained spaces, facilitating detailed and targeted treatments. Its lightweight build ensures easy maneuverability without sacrificing power, and the robust motor guarantees consistent performance.

The AP APC series stands out for its multi-purpose functionality. This range is designed to perform well under diverse environmental conditions, making it suitable for various crops. The addition of a high-capacity tank allows for extended working hours without frequent refills, enhancing productivity. Furthermore, its low-center-of-gravity design improves stability on uneven terrains.

Lastly, the EOLO series showcases Unigreen's commitment to eco-friendliness. These machines feature low-drift nozzles that keep the chemicals where they are needed most, which helps in minimizing off-target application. The EOLO series also incorporates energy-efficient technologies, reducing fuel consumption and greenhouse gas emissions.

In summary, Unigreen's SIRIO, EXPO, DEVIL, AP APC, and EOLO series represent a blend of innovation, efficiency, and environmental responsibility. Each model is designed to meet the specific requirements of various agricultural environments, ensuring that farmers can operate at peak efficiency while contributing to sustainable farming practices.
Top Page Image Contents