Univex 358.792400 Maintenance Schedule, Care and Maintenance Task, Blade Maintenance

Page 9

eoA0,ostbh __ 1. Loosen the depth adjustment knob. 2. Slide the wheel to the desired posi-

tion.

• Raising the wheel wilt increase the cutting depth.

• Lowering the wheel will decrease the cutting depth.

3. Tighten the depth adjustment knob securely.

MAINTENANCE SCHEDULE

WARNING: Always stop unit and disconnect spark plug wire (or discon-

nect powerhead from power source)

CARE AND MAINTENANCE TASK

Check for loose fasteners and parts

Check for damaged or worn parts

Inspect and clean unit and decals

Check or replace blade

GEN ERAL RECOMMEN DATIONS

The warranty on this attachment does not cover items that have been sub-

jected to operator abuse or negli-

gence. To receive full value from the warranty, the operator must maintain the edger attachment as instructed in this manual.

CHECK FOR DAMAGED OR WORN PARTS

Contact Sears Service Center for re- placement of damaged or worn parts.

• Blade Shield - Discontinue use of

edger if blade shield is damaged.

CHECK FOR LOOSE FASTENERS AND PARTS

Blade nut

Fasteners

INSPECT AND CLEAN UNIT AND DECALS

After each use, inspect complete unit for loose or damaged parts. Clean the unit and decals using a damp cloth with a mild detergent.

Wipe off unit with a clean dry cloth.

before performing maintenance.

WHEN TO PERFORM

Before each use

Before each use

After each use

Every 5 hours of operation

BLADE MAINTENANCE

_WARNING:

The blade will corn

tinue to spin after the engine stops or after the throttle trigger has been re- leased. To avoid serious injury, make sure the blade has stopped coasting and disconnect the spark plug (or dis- connect powerhead from power source) before performing work on the blade.

zl,_

all.WARNING: Always replace a blade that is bent, warped, cracked, broken, or damaged in any other way. Never attempt to straighten and reuse a damaged blade, Use only specified replacement blade. Wear protective gloves when handling or performing maintenance on the blade to help avoid injury,

The blade is reversible. When the cutting edge on one side becomes worn, turn the blade over (see BLADE REPLACEMENT in the SER- VICE AND ADJUSTMENTS section).

Check blade for flatness periodically. Lay the blade on a flat surface to in- spect for flatness. Throw away a blade that is not flat.

9

Image 9
Contents Lawn Edger Attachment Full ONE Year Warranty on Craftsman Llawn Edger Attachment Operator SafetySears, Roebuck and Co., D/817 WA, Hoffman Estates, IL Page Edging Safety UNIT/MAINTENANCE SafetyTransporting and Storage Lk WarningAssembly Handlebar AssemblyModel Know Your Edger Attachment Depth Adjustment KnobBlade Operating the CouplerInstalling Attachment Hanger Installing AttachmentSetting the Edging Depth Operating PositionMaintenance Schedule Care and Maintenance TaskBlade Maintenance Seasonal Storage Blade ReplacementDE Seguridad DEL AparatoSeguridad Deloperador Seguridad CON EL Combus Tible para cabezas motrices a ga- solinaSeguridad Electrica Seguridad DEL Aparato Construccion DE Doble AISLA- MientoSeouridad AL Cortar Bordes Advertencia Transporte Y AlmacenadoGuarde Estas Instrucciones Contenido DE LA Caja Installation DEL Mango Iipeligro Riesgo DE CORModelo MontajeCuchilla Conozca EL Cortadora DE Bordes AccesorioPerilla DE Ajuste DE PROFUN- Didad La Perilla DE Ajuste DE ProfundiINSTACALI3N DEL Suspensor Como Remover EL Accesorio Precaucion AI retirar o instalarPosicion DE USO Instalacion DEL AccesorioNunca Ajuste DE ProfundidadCronograma DE Mantenimiento Recomendaciones GeneralesMantenimiento DE LA Cuchilla Inspeccione Y Limpie EL Aparato Y LAS PlacasCambio DE LA Cuchilla ADVERTENClAIbADVERTENCIA Realice los Siguientes pasos despu6s de cada