Ryobi Outdoor PLT3043E, RY70103 manual Assembly Instructions, See Figure

Page 7

ASSEMBLY

ASSEMBLY INSTRUCTIONS:

GRASS DEFLECTOR

See Figure 2.

1.Remove wing nut, flat washer, lock washer and bolt from the Owner’s Kit.

2.Place grass deflector over shaft and bracket.

3.Install bolt through the slots in the tabs on grass deflector and bracket on drive shaft housing.

4.Install flat washer, lock washer and wing nut.

5.Tighten Securely.

GRASS DEFLECTOR

BOLT

FLAT WASHER

LOCK WASHER

WING NUT

BRACKET

Fig. 2

FRONT HANDLE

See Figure 3.

1.Place the handle base and the bracket on the drive shaft housing below the spacer.

2.Install the two handle base screws and nuts, but do not tighten completely.

3.Place the handle grip onto the handle base and install the two screws. Tighten securely.

4.Adjust the position of the handle for best balance and comfort.

5.Tighten the two handle base screws securely.

NOTE: Do not attempt to remove or modify the spacer. This spacer limits the upper position of the handle grip. See Figure 3.

HANDLE BASE

SCREWS

HANDLE

BASE

BRACKET NUTS

SPACER

HANDLE GRIP

SCREWS

Fig. 3

Page 6 Page 8
Image 7
Page 6 Page 8
Contents OPERATOR’S Manual Safety Table of ContentsSpecific Safety Rules for Trimmer USE Symbol Name Explanation SymbolsTechnical Data Packing List for OWNER’S KIT FeaturesUnpacking InstructionsHandle Base Screws Bracket Nuts Spacer Handle Grip AssemblyAssembly Instructions See FigureSilencer Guard Assembly Fuel and Refuelling OperationOperating the Trimmer Grass Deflector Line Trimming CUT-OFF Blade Advancing String Using the EZ Line TAP Advance SystemAdvancing the String Cutting TipsStarting and Stopping See Figures 10 MaintenanceSpool Replacement EZ Line TAP Advance System NEW PRE-WOUND SpoolArrows on Spool Anchor Hole First String Cleaning the Exhaust Port and SilencerString Replacement Spark ArresterStorage 1 Month or Longer Replacing and Cleaning AIR FilterFuel CAP Sparking PlugIdle speed. See Figure TroubleshootingIdle Speed Screw Needle Sound Pressure Sound Power Vibration Model Model no WarrantySafety Directive Guarantee Statement Rtsa / Rtuk / RTGRyobi Technologies GmbH
Top Page Image Contents