Ryobi RPW2500WB user manual Using the Spray Wand Trigger,  Warning, See Figures 19

Page 16

OPERATION

Grasp recoil starter and pull slowly until resistance is felt. Give recoil starter a short, brisk pull to start the engine. Do not allow the recoil starter to snap back after starting; return it gently to its original place.

NOTE:  If engine does not start after several pulls, depress trigger to release pressure then repeat normal starting procedure.

Let engine run for several seconds, then push choke in.

To stop the engine:

Put the engine switch in the OFF position.

Turn the fuel valve to the OFF position.

nPush up on the lock out until it clicks into the slot.

USING THE SPRAY WAND TRIGGER

See Figures 19 - 20.

For greater control and safety, keep both hands on the trigger handle at all times.

nPull back and hold the trigger to operate the pressure washer.

nRelease the trigger to stop the flow of water through the nozzle.

To engage the lock out:

nPush up on the lock out until it clicks into the slot.

To disengage the lock out:

nPush the lock out down and into its original position.

For the most effective cleaning, the spray nozzle should be between 20 cm and 60 cm from the surface to be cleaned. If the spray is too close it can damage the cleaning surface.

SELECTING THE RIGHT QUICK-CONNECT NOZZLE FOR THE JOB

See Figure 21.

Before starting any cleaning job, determine the best nozzle for the job. Each of the nozzles has a different spray pattern. The nozzle patterns are: 25° (for general purpose or large surfaces), 15° (for tough jobs), 0° (for spot cleaning or hard-to-reach areas), and the Soap Blaster™ nozzle (for

TRIGGER

Fig. 19

SLOT

LOCK OUT

Fig. 20

NOZZLE

“CLICK”QUICK-CONNECT COLLAR

long and short range detergent application).

WARNING:

NEVER change nozzles without locking the lock out on the trigger handle and NEVER point the wand at your face or at others. The quick-connect feature contains small springs that could eject the nozzle with some force. Failure to heed this may cause personal injury.

Using the quick-connect collar, changing nozzles is easy.

To connect a nozzle to the trigger handle:

nTurn off the pressure washer and shut off the water supply. Pull trigger to release water pressure.

nEngage the lock out on the trigger handle by pushing up on the lock out until it clicks into the slot.

SPRAY

WAND

SOAP BLASTER™

SHORT RANGE

DETERGENT

APPLICATION

LONG RANGE

DETERGENT

APPLICATION

Fig. 21

16

Page 15 Page 17
Image 16
Page 15 Page 17
Contents OPERATOR’S Manual Save this Manual for Future ReferenceTable of Contents IntroductionImportant Safety Instructions Read ALL InstructionsSpecific Safety Rules Symbols Symbol Name DESIGNATION/EXPLANATIONService Symbol Signal MeaningFeatures Product SpecificationsAssembly Installing the Handle BAR See Figures 2Installing Trigger Handle Holders Assembling the Spray WandSee Figures 4 Handle Lock Trigger Outlet Coupler Spray Wand ReleaseConnecting the High Pressure Hose to the Pump Connecting High Pressure Hose to Trigger HandleAttaching Injection Hose Connecting the Garden Hose to Pressure Washer Before connecting the garden hose to the pressure washerSee Figures 10 Water IntakeSee Figures 12 Installing Cleaning DeckTrigger Handle Adding Lubricant to the Engine Adding Gasoline to the Fuel TankOIL CAP /  Dipstick FunnelOperation ApplicationsStarting and Stopping the Pressure Washer See Figures 17Using the Spray Wand Trigger Selecting the Right QUICK-CONNECT Nozzle for the JOB Warning See Figures 19Washing with Detergent See Figures 22For long range detergent application For short range detergent applicationUsing the Cleaning Deck Rinsing with the Pressure WasherBefore shutting off the engine See Figures 24Lifting and Moving the Pressure Washer See Figures 26To lift the pressure washer To move the pressure washerMaintenance General MaintenanceNozzle Maintenance See Figures 28Cleaning the AIR Filter To clean nozzles on cleaning deckAIR Filter Cover AIR FilterPreparing for USE After Storage Storing the Pressure WasherTo Store the Machine Troubleshooting Problem Cause SolutionLimited Warranty CE DECLARATION of ConformityRyobi Technologies UK Limited Ryobi BelgiumRyobi Italia Ryobi Technologies Gmbh

RPW2500WB specifications

The Ryobi RPW2500WB is a powerful and versatile pressure washer designed for both residential and light commercial use. With a robust 2,500 PSI and a 2.3 GPM flow rate, this machine effectively tackles tough cleaning tasks such as removing grime from driveways, patios, decks, and vehicles. Its impressive cleaning power allows users to quickly and efficiently complete large cleaning jobs, making it a valuable tool for homeowners and service providers alike.

One of the standout features of the RPW2500WB is its powerful 1.7 HP motor, which enables high-pressure water output, ensuring a thorough clean with minimal effort. The electric start is a convenient addition, allowing for easy ignition without the hassle of pull cords, enhancing the user experience significantly. The machine is also equipped with a durable, corrosion-resistant metal frame that provides stability and longevity, ensuring that it can withstand the rigors of frequent use.

In terms of technology, the RPW2500WB features an adjustable spray nozzle that allows users to customize the water pressure and spray pattern to suit various cleaning tasks. This versatility is particularly beneficial for tackling different surfaces, from sensitive vehicle finishes to tough concrete surfaces. The inclusion of quick-connect nozzles also enhances usability, enabling users to switch between tasks without delay.

The RPW2500WB incorporates environmentally friendly features, such as a detergent tank that allows for the application of cleaning solutions, ensuring that even the most stubborn stains can be eliminated effectively. The onboard storage for accessories and hoses makes it easy to keep the workspace organized and tidy.

Another notable characteristic is its lightweight design, which includes durable wheels for easy mobility. This portability ensures that users can transport the pressure washer effortlessly to different job sites or store it compactly when not in use.

In conclusion, the Ryobi RPW2500WB pressure washer combines power, versatility, and user-friendly features, making it an excellent choice for anyone seeking an efficient cleaning solution. With its advanced technologies and practical design elements, the RPW2500WB stands out in the crowded market of pressure washers, offering reliability and performance that users can depend on.
Top Page Image Contents