Ryobi RPW2500WB Cleaning the AIR Filter, To clean nozzles on cleaning deck, AIR Filter Cover

Page 21

MAINTENANCE

To clean nozzles on cleaning deck:

n Turn off the pressure washer and shut off the water supply. With the surface cleaner on the ground, pull trig- ger to release water pressure.

n Disconnect cleaning deck from pressure washer or spray wand.

n Using a wrench (not provided), remove the nozzle from the spray bar.

NOTE: Never point the spray bar at your face.

n Using the nozzle cleaning tool provided, free any foreign materials clogging or restricting the nozzle.

n Using a garden hose, flush debris out of nozzle by back

 

flushing (running the water through the nozzle backwards

SHROUD

or from the outside to the inside).

 

n Reconnect the nozzle to the spray bar and tighten

securely­ . After tightening, make sure the nozzle opening is pointed in the same direction as the spray bar as shown in figure 30.

n Reconnect the cleaning deck to the spray wand or pres- sure washer.

n Turn on the water supply and start the engine.

AIR FILTER

COVER

CLEANING THE AIR FILTER

See Figure 31.

A dirty air filter will cause starting difficulty, loss of performance, and shorten the life span of the engine. Check the air filter monthly. For best performance, replace the air filter at least once a year.

nPush the tab on the air filter cover to open, then remove the air filter cover.

nLift the edge of the air filter carefully and pull it out.

nLightly tap or blow out dirt particles from filter.

nReinstall the air filter cover.

NOTE: Make sure the filter is seated properly inside the cover. Installing the filter incorrectly will allow dirt to enter the engine, causing rapid engine wear.

AIR FILTER

AIR FILTER

COVER

Fig. 31

21

Page 20 Page 22
Image 21
Page 20 Page 22
Contents Save this Manual for Future Reference OPERATOR’S ManualIntroduction Table of ContentsRead ALL Instructions Important Safety InstructionsSpecific Safety Rules Symbol Name DESIGNATION/EXPLANATION SymbolsSymbol Signal Meaning ServiceProduct Specifications FeaturesAssembly See Figures 2 Installing the Handle BARAssembling the Spray Wand Installing Trigger Handle HoldersSee Figures 4 Handle Lock Trigger Outlet Coupler Spray Wand ReleaseConnecting High Pressure Hose to Trigger Handle Connecting the High Pressure Hose to the PumpAttaching Injection Hose Before connecting the garden hose to the pressure washer Connecting the Garden Hose to Pressure WasherSee Figures 10 Water IntakeInstalling Cleaning Deck See Figures 12Trigger Handle Adding Gasoline to the Fuel Tank Adding Lubricant to the EngineOIL CAP /  Dipstick FunnelApplications OperationStarting and Stopping the Pressure Washer See Figures 17Selecting the Right QUICK-CONNECT Nozzle for the JOB Using the Spray Wand Trigger Warning See Figures 19See Figures 22 Washing with DetergentFor long range detergent application For short range detergent applicationRinsing with the Pressure Washer Using the Cleaning DeckBefore shutting off the engine See Figures 24See Figures 26 Lifting and Moving the Pressure WasherTo lift the pressure washer To move the pressure washerGeneral Maintenance MaintenanceNozzle Maintenance See Figures 28To clean nozzles on cleaning deck Cleaning the AIR FilterAIR Filter Cover AIR FilterStoring the Pressure Washer Preparing for USE After StorageTo Store the Machine Problem Cause Solution TroubleshootingCE DECLARATION of Conformity Limited WarrantyRyobi Belgium Ryobi Technologies UK LimitedRyobi Italia Ryobi Technologies Gmbh

RPW2500WB specifications

The Ryobi RPW2500WB is a powerful and versatile pressure washer designed for both residential and light commercial use. With a robust 2,500 PSI and a 2.3 GPM flow rate, this machine effectively tackles tough cleaning tasks such as removing grime from driveways, patios, decks, and vehicles. Its impressive cleaning power allows users to quickly and efficiently complete large cleaning jobs, making it a valuable tool for homeowners and service providers alike.

One of the standout features of the RPW2500WB is its powerful 1.7 HP motor, which enables high-pressure water output, ensuring a thorough clean with minimal effort. The electric start is a convenient addition, allowing for easy ignition without the hassle of pull cords, enhancing the user experience significantly. The machine is also equipped with a durable, corrosion-resistant metal frame that provides stability and longevity, ensuring that it can withstand the rigors of frequent use.

In terms of technology, the RPW2500WB features an adjustable spray nozzle that allows users to customize the water pressure and spray pattern to suit various cleaning tasks. This versatility is particularly beneficial for tackling different surfaces, from sensitive vehicle finishes to tough concrete surfaces. The inclusion of quick-connect nozzles also enhances usability, enabling users to switch between tasks without delay.

The RPW2500WB incorporates environmentally friendly features, such as a detergent tank that allows for the application of cleaning solutions, ensuring that even the most stubborn stains can be eliminated effectively. The onboard storage for accessories and hoses makes it easy to keep the workspace organized and tidy.

Another notable characteristic is its lightweight design, which includes durable wheels for easy mobility. This portability ensures that users can transport the pressure washer effortlessly to different job sites or store it compactly when not in use.

In conclusion, the Ryobi RPW2500WB pressure washer combines power, versatility, and user-friendly features, making it an excellent choice for anyone seeking an efficient cleaning solution. With its advanced technologies and practical design elements, the RPW2500WB stands out in the crowded market of pressure washers, offering reliability and performance that users can depend on.
Top Page Image Contents