Ryobi RPW2500WB user manual Assembly

Page 8

FEATURES

KNOW YOUR PRESSURE WASHER

See Figure 1.

The safe use of this product requires an understanding of the information on the tool and in this operator’s manual as well as a knowledge of the project you are attempting. Before use of this product, familiarize yourself with all operating features and safety rules.

CLEANING DECK

The cleaning deck can be used to clean large flat areas using less time and energy than when using the spray wand.

ENGINE SWITCH

The engine switch is used in combination with the recoil starter grip to start the engine. It is also used to turn the engine off.

FUEL TANK

This fuel tank has a maximum capacity of 1 liter. Use unleaded automotive gasoline in the engine.

HIGH PRESSURE HOSE STORAGE

Once the high pressure hose is rolled, hang it on the back of the machine using the hook-and-loop strap to secure in place.

HONDA GCV160 ENGINE

This Honda engine enables the pressure washer to achieve 17 926 kPa at a rate of 8,7 liters per minute. Please read the engine manual included with this product.

NOZZLE HOLDER WITH SPRING CLIP

The spring clip attached to the nozzle holder allows you to clip the nozzle holder to the unit or wear it on your belt for convenience.

RECOIL STARTER

The recoil starter is pulled to start the machine.

SOAP BLASTER™ NOZZLE

The soap blaster™ nozzle can be easily adjusted for long range or short range cleaning.

SPARK ARRESTOR

This engine is not factory equipped with a spark arrestor. In some areas it is illegal to operate an engine without a spark arrestor. A spark arrestor is available by calling customer service for assistance.

THERMAL RELIEF VALVE

This pump feature will prevent water temperatures from reaching harmful levels by releasing a small amount of water. Once the water has drained, the thermal relief valve will reset itself.

TRIGGER HANDLE

The trigger handle has a gripping surface that provides added control of the spray wand and helps reduce fatigue.

TRIGGER WITH LOCK OUT

Pulling the trigger releases a stream of water for high pressure cleaning. The lock out provides protection against unauthorized use.

ASSEMBLY

UNPACKING

This product requires assembly.

nCarefully cut the box down the sides then remove the product and any accessories from the box. Make sure that all items listed in the packing list are included.

NOTE: This product is heavy. To avoid back injury, lift with your legs, not your back, and get help when needed.

nInspect the product carefully to make sure no breakage or damage occurred during shipping.

nDo not discard the packing material until you have care- fully inspected and satisfactorily operated the product.

nIf any parts are damaged or missing, please call your supplying retailer for assistance.

PACKING LIST

Pressure Washer

Trigger Handle

8 Meter High Pressure Hose

PACKING LIST (CONTINUED)

Self-Coiling Garden Hose

EU Garden Hose Coupler Spray Wand Quick-Connect Nozzle (3) Soap Blaster™ Nozzle Nozzle Holder with Spring Clip Injection Hose and Filter

Top Trigger Handle Holder Bottom Trigger Handle Holder Trigger Handle Holder Screws (4) Trigger Handle Holder Nuts (4) Handle Bar

Cleaning deck

4-Cycle Engine Lubricant (SAE 10W30) Operator’s Manual

8

Page 7 Page 9
Image 8
Page 7 Page 9
Contents OPERATOR’S Manual Save this Manual for Future ReferenceTable of Contents IntroductionImportant Safety Instructions Read ALL InstructionsSpecific Safety Rules Symbols Symbol Name DESIGNATION/EXPLANATIONService Symbol Signal MeaningFeatures Product SpecificationsAssembly Installing the Handle BAR See Figures 2Installing Trigger Handle Holders Assembling the Spray WandSee Figures 4 Handle Lock Trigger Outlet Coupler Spray Wand ReleaseAttaching Injection Hose Connecting High Pressure Hose to Trigger HandleConnecting the High Pressure Hose to the Pump Connecting the Garden Hose to Pressure Washer Before connecting the garden hose to the pressure washerSee Figures 10 Water IntakeTrigger Handle Installing Cleaning DeckSee Figures 12 Adding Lubricant to the Engine Adding Gasoline to the Fuel TankOIL CAP /  Dipstick FunnelOperation ApplicationsStarting and Stopping the Pressure Washer See Figures 17Using the Spray Wand Trigger Selecting the Right QUICK-CONNECT Nozzle for the JOB Warning See Figures 19Washing with Detergent See Figures 22For long range detergent application For short range detergent applicationUsing the Cleaning Deck Rinsing with the Pressure WasherBefore shutting off the engine See Figures 24Lifting and Moving the Pressure Washer See Figures 26To lift the pressure washer To move the pressure washerMaintenance General MaintenanceNozzle Maintenance See Figures 28Cleaning the AIR Filter To clean nozzles on cleaning deckAIR Filter Cover AIR FilterTo Store the Machine Storing the Pressure WasherPreparing for USE After Storage Troubleshooting Problem Cause SolutionLimited Warranty CE DECLARATION of ConformityRyobi Technologies UK Limited Ryobi BelgiumRyobi Italia Ryobi Technologies Gmbh

RPW2500WB specifications

The Ryobi RPW2500WB is a powerful and versatile pressure washer designed for both residential and light commercial use. With a robust 2,500 PSI and a 2.3 GPM flow rate, this machine effectively tackles tough cleaning tasks such as removing grime from driveways, patios, decks, and vehicles. Its impressive cleaning power allows users to quickly and efficiently complete large cleaning jobs, making it a valuable tool for homeowners and service providers alike.

One of the standout features of the RPW2500WB is its powerful 1.7 HP motor, which enables high-pressure water output, ensuring a thorough clean with minimal effort. The electric start is a convenient addition, allowing for easy ignition without the hassle of pull cords, enhancing the user experience significantly. The machine is also equipped with a durable, corrosion-resistant metal frame that provides stability and longevity, ensuring that it can withstand the rigors of frequent use.

In terms of technology, the RPW2500WB features an adjustable spray nozzle that allows users to customize the water pressure and spray pattern to suit various cleaning tasks. This versatility is particularly beneficial for tackling different surfaces, from sensitive vehicle finishes to tough concrete surfaces. The inclusion of quick-connect nozzles also enhances usability, enabling users to switch between tasks without delay.

The RPW2500WB incorporates environmentally friendly features, such as a detergent tank that allows for the application of cleaning solutions, ensuring that even the most stubborn stains can be eliminated effectively. The onboard storage for accessories and hoses makes it easy to keep the workspace organized and tidy.

Another notable characteristic is its lightweight design, which includes durable wheels for easy mobility. This portability ensures that users can transport the pressure washer effortlessly to different job sites or store it compactly when not in use.

In conclusion, the Ryobi RPW2500WB pressure washer combines power, versatility, and user-friendly features, making it an excellent choice for anyone seeking an efficient cleaning solution. With its advanced technologies and practical design elements, the RPW2500WB stands out in the crowded market of pressure washers, offering reliability and performance that users can depend on.
Top Page Image Contents