Ryobi RPW2500WB user manual Storing the Pressure Washer, Preparing for USE After Storage

Page 22

MAINTENANCE

STORING THE PRESSURE WASHER

See Figure 32.

Storethe pressure washer with the gas tank empty by either draining the tank or running the pressure washer until the gas runs out. Allow 30 minutes of “cool down” time before storing the machine. Store in a dry, covered area where the weather can’t damage it.

It is important to store this product in a frost-free area. Always empty water from all hoses and the pump before storing.

NOTE: Use of a fuel stabilizer and pump saver will give you better performance and increase the life of the machine.

Discharge Fuel:

Drain the fuel tank completely. Stored gas can go stale in 30 days.

Engine Lubricant:

Drain the lubricant and replace with fresh, clean lubricant.

Spark Plug:

nDisconnect spark plug wire and remove the spark plug. Pour about a teaspoon of clean, air-cooled, four-cycle lubricant through the spark plug hole into the combustion chamber.

nLeaving the spark plug out, pull the starter cord two or three times to coat the inside of the cylinder wall.

nInspect the spark plug and clean or replace, as neces- sary.

nReinstall the spark plug, but leave the spark plug wire disconnected.

Air Filter:

nClean the air filter.

Hoses and Pump:

Flush the injection hose with clean water for 1-2 minutes. Remove all hoses. Empty the pump by pulling on the recoil starter about 6 times. This should remove most of the liquid from the pump.

Handle Bar:

NOTE: Before lowering the handle bar, disconnect the high pressure water hose from the trigger handle outlet coupler.

nTo lower the handle bar for storage, remove the acorn nut and knob.

nRotate handle bar forward to the next indentation in handle spacer.

nRetighten knob and acorn nut to secure.

TO STORE THE MACHINE

Fig. 32

PREPARING FOR USE AFTER STORAGE

nRestore handle to operating position.

nPull the recoil starter grip three or four times to clean lubricant from the combustion chamber.

nRemove spark plug from the cylinder. Wipe lubricant from the spark plug and return it to the cylinder.

nReconnect the spark plug wire.

nRefuel the machine as described earlier in the operator’s manual.

22

Page 21 Page 23
Image 22
Page 21 Page 23
Contents OPERATOR’S Manual Save this Manual for Future ReferenceTable of Contents IntroductionImportant Safety Instructions Read ALL InstructionsSpecific Safety Rules Symbols Symbol Name DESIGNATION/EXPLANATIONService Symbol Signal MeaningFeatures Product SpecificationsAssembly Installing the Handle BAR See Figures 2See Figures 4 Installing Trigger Handle HoldersAssembling the Spray Wand Handle Lock Trigger Outlet Coupler Spray Wand ReleaseConnecting the High Pressure Hose to the Pump Connecting High Pressure Hose to Trigger HandleAttaching Injection Hose See Figures 10 Connecting the Garden Hose to Pressure WasherBefore connecting the garden hose to the pressure washer Water IntakeSee Figures 12 Installing Cleaning DeckTrigger Handle OIL CAP /  Dipstick Adding Lubricant to the EngineAdding Gasoline to the Fuel Tank FunnelStarting and Stopping the Pressure Washer OperationApplications See Figures 17 Warning Using the Spray Wand TriggerSelecting the Right QUICK-CONNECT Nozzle for the JOB See Figures 19For long range detergent application Washing with DetergentSee Figures 22 For short range detergent applicationBefore shutting off the engine Using the Cleaning DeckRinsing with the Pressure Washer See Figures 24To lift the pressure washer Lifting and Moving the Pressure WasherSee Figures 26 To move the pressure washerNozzle Maintenance MaintenanceGeneral Maintenance See Figures 28AIR Filter Cover Cleaning the AIR FilterTo clean nozzles on cleaning deck AIR FilterPreparing for USE After Storage Storing the Pressure WasherTo Store the Machine Troubleshooting Problem Cause SolutionLimited Warranty CE DECLARATION of ConformityRyobi Italia Ryobi Technologies UK LimitedRyobi Belgium Ryobi Technologies Gmbh

RPW2500WB specifications

The Ryobi RPW2500WB is a powerful and versatile pressure washer designed for both residential and light commercial use. With a robust 2,500 PSI and a 2.3 GPM flow rate, this machine effectively tackles tough cleaning tasks such as removing grime from driveways, patios, decks, and vehicles. Its impressive cleaning power allows users to quickly and efficiently complete large cleaning jobs, making it a valuable tool for homeowners and service providers alike.

One of the standout features of the RPW2500WB is its powerful 1.7 HP motor, which enables high-pressure water output, ensuring a thorough clean with minimal effort. The electric start is a convenient addition, allowing for easy ignition without the hassle of pull cords, enhancing the user experience significantly. The machine is also equipped with a durable, corrosion-resistant metal frame that provides stability and longevity, ensuring that it can withstand the rigors of frequent use.

In terms of technology, the RPW2500WB features an adjustable spray nozzle that allows users to customize the water pressure and spray pattern to suit various cleaning tasks. This versatility is particularly beneficial for tackling different surfaces, from sensitive vehicle finishes to tough concrete surfaces. The inclusion of quick-connect nozzles also enhances usability, enabling users to switch between tasks without delay.

The RPW2500WB incorporates environmentally friendly features, such as a detergent tank that allows for the application of cleaning solutions, ensuring that even the most stubborn stains can be eliminated effectively. The onboard storage for accessories and hoses makes it easy to keep the workspace organized and tidy.

Another notable characteristic is its lightweight design, which includes durable wheels for easy mobility. This portability ensures that users can transport the pressure washer effortlessly to different job sites or store it compactly when not in use.

In conclusion, the Ryobi RPW2500WB pressure washer combines power, versatility, and user-friendly features, making it an excellent choice for anyone seeking an efficient cleaning solution. With its advanced technologies and practical design elements, the RPW2500WB stands out in the crowded market of pressure washers, offering reliability and performance that users can depend on.
Top Page Image Contents