Ryobi RPW2500WB user manual General Maintenance, Nozzle Maintenance, See Figures 28

Page 20

MAINTENANCE

WARNING:

When servicing, use only identical replacement parts. Use of any other parts may create a hazard or cause product damage.

WARNING:

Always wear safety goggles or safety glasses with side shields during power tool operation or when blowing dust. If operation is dusty, also wear a dust mask.

STRAIGHTENED

NOZZLE

PAPER CLIP

Fig. 28

WARNING:

Before inspecting, cleaning or servicing the machine, shut off engine, wait for all moving parts to stop, and discon- nect spark plug wire and move it away from spark plug. Failure to follow these instructions can result in serious personal injury or property damage.

GENERAL MAINTENANCE

 

 

Avoid using solvents when cleaning plastic parts. Most

SPRAY BAR

 

plastics are susceptible to damage from various types of

Fig. 29

commercial solvents and may be damaged by their use. Use

 

 

 

clean cloths to remove dirt, dust, oil, grease, etc.

 

 

WARNING:

Do not at any time let brake fluids, gasoline, petroleum- based products, penetrating oils, etc., come in contact with plastic parts. Chemicals can damage, weaken or destroy plastic which may result in serious personal injury.

Only the parts shown on the parts list are intended to be repaired or replaced by the customer. All other parts should be replaced at an authorized service center.

Before running the engine, perform the following pre- operation steps:

nCheck that all bolts, nuts, etc., are securely tightened.

nMake sure the air filter is clean.

nCheck both the engine lubricant level and the fuel tank level; refill as needed.

nInspect the work area for hazards.

nIf there is excessive noise or vibration, stop the unit immediately.

NOZZLE MAINTENANCE

See Figures 28 - 30.

Excessive pump pressure (a pulsing sensation felt while squeezing the trigger) may be the result of a clogged or dirty nozzle.

NOZZLE OPENING

 

AFTER TIGHTENING SECURELY,

 

NOZZLE OPENING SHOULD BE POINTED

 

IN SAME DIRECTION AS SPRAY BAR

Fig. 30

nTurn off the pressure washer and shut off the water supply. Point nozzle in a safe direction and pull trigger to release water pressure.

nRemove the nozzle from the spray wand.

NOTE: Never point the spray wand at your face.

nUsing a straightened paper clip or nozzle cleaning tool

(not provided), free any foreign materials clogging or restricting the nozzle.

nUsing a garden hose, flush debris out of nozzle by back flushing (running the water through the nozzle backwards or from the outside to the inside).

nReconnect the nozzle to the spray wand.

nTurn on the water supply and start the engine.

20

Page 19 Page 21
Image 20
Page 19 Page 21
Contents OPERATOR’S Manual Save this Manual for Future ReferenceTable of Contents IntroductionImportant Safety Instructions Read ALL InstructionsSpecific Safety Rules Symbols Symbol Name DESIGNATION/EXPLANATIONService Symbol Signal MeaningFeatures Product SpecificationsAssembly Installing the Handle BAR See Figures 2Installing Trigger Handle Holders Assembling the Spray WandSee Figures 4 Handle Lock Trigger Outlet Coupler Spray Wand ReleaseAttaching Injection Hose Connecting High Pressure Hose to Trigger HandleConnecting the High Pressure Hose to the Pump Connecting the Garden Hose to Pressure Washer Before connecting the garden hose to the pressure washerSee Figures 10 Water IntakeTrigger Handle Installing Cleaning DeckSee Figures 12 Adding Lubricant to the Engine Adding Gasoline to the Fuel TankOIL CAP /  Dipstick FunnelOperation ApplicationsStarting and Stopping the Pressure Washer See Figures 17Using the Spray Wand Trigger Selecting the Right QUICK-CONNECT Nozzle for the JOB Warning See Figures 19Washing with Detergent See Figures 22For long range detergent application For short range detergent applicationUsing the Cleaning Deck Rinsing with the Pressure WasherBefore shutting off the engine See Figures 24Lifting and Moving the Pressure Washer See Figures 26To lift the pressure washer To move the pressure washerMaintenance General MaintenanceNozzle Maintenance See Figures 28Cleaning the AIR Filter To clean nozzles on cleaning deckAIR Filter Cover AIR FilterTo Store the Machine Storing the Pressure WasherPreparing for USE After Storage Troubleshooting Problem Cause SolutionLimited Warranty CE DECLARATION of ConformityRyobi Technologies UK Limited Ryobi BelgiumRyobi Italia Ryobi Technologies Gmbh

RPW2500WB specifications

The Ryobi RPW2500WB is a powerful and versatile pressure washer designed for both residential and light commercial use. With a robust 2,500 PSI and a 2.3 GPM flow rate, this machine effectively tackles tough cleaning tasks such as removing grime from driveways, patios, decks, and vehicles. Its impressive cleaning power allows users to quickly and efficiently complete large cleaning jobs, making it a valuable tool for homeowners and service providers alike.

One of the standout features of the RPW2500WB is its powerful 1.7 HP motor, which enables high-pressure water output, ensuring a thorough clean with minimal effort. The electric start is a convenient addition, allowing for easy ignition without the hassle of pull cords, enhancing the user experience significantly. The machine is also equipped with a durable, corrosion-resistant metal frame that provides stability and longevity, ensuring that it can withstand the rigors of frequent use.

In terms of technology, the RPW2500WB features an adjustable spray nozzle that allows users to customize the water pressure and spray pattern to suit various cleaning tasks. This versatility is particularly beneficial for tackling different surfaces, from sensitive vehicle finishes to tough concrete surfaces. The inclusion of quick-connect nozzles also enhances usability, enabling users to switch between tasks without delay.

The RPW2500WB incorporates environmentally friendly features, such as a detergent tank that allows for the application of cleaning solutions, ensuring that even the most stubborn stains can be eliminated effectively. The onboard storage for accessories and hoses makes it easy to keep the workspace organized and tidy.

Another notable characteristic is its lightweight design, which includes durable wheels for easy mobility. This portability ensures that users can transport the pressure washer effortlessly to different job sites or store it compactly when not in use.

In conclusion, the Ryobi RPW2500WB pressure washer combines power, versatility, and user-friendly features, making it an excellent choice for anyone seeking an efficient cleaning solution. With its advanced technologies and practical design elements, the RPW2500WB stands out in the crowded market of pressure washers, offering reliability and performance that users can depend on.
Top Page Image Contents