Ryobi RY42110 Operation, Applications, Switching Between Blower Mode and Vacuum Mode

Page 11

OPERATION

WARNING:

Do not allow familiarity with this product to make you careless. Remember that a careless fraction of a second is sufficient to inflict serious injury.

WARNING:

Always wear eye protection with side shields marked to comply with ANSI Z87.1, along with hearing protection. Failure to do so could result in objects being thrown into your eyes and other possible serious injuries.

WARNING:

Never remove discharge outlet elbow. Removal of elbow could result in contact with moving fan blades and cause serious personal injuries.

APPLICATIONS

You may use this product for the purposes listed below:

Clearing leaves and other debris from your lawn

Keeping decks and driveways free from leaves and pine needles

Vacuuming leaves from your lawn

SWITCHING BETWEEN BLOWER MODE AND VACUUM MODE

See Figure 6.

WARNING:

Always ensure that your unit is switched off and has fully stopped before changing the mode of operation. Do not force the quick change lever. It should move smoothly without resistance. If you encounter problems, discon- nect from power supply and clean the lever mechanism.

For blower mode:

Switch the quick change lever DOWN so it points to the blow symbol ( ).

For vacuum mode:

Switch the quick change lever UP so it points to the vacuum symbol ( ).

STARTING AND STOPPING

See Figure 7.

NOTE: For added safety, your blower/vac has double safety switching. If the blower/vacuum tube is not properly con- nected to the motor housing or the tubes are not fully ex- tended and have not locked in place, the blower/vac will not start. Check the troubleshooting guide later in this manual for more information.

To start the blower/vac:

Attach the outlet end of an extension cord to the plug on the cord at the rear of blower vac.

NOTE:  Use only an approved outdoor extension cord as described previously in this manual.

Route the extension cord through the side of the loop located on the rear of the blower housing and place underneath the cord retainer.

CAUTION:

Always secure extension cord to unit by using cord re- tainer. Failure to use cord retainer may result in damage to the unit and/or extension cord.

Connect the blower/vac to the power supply. The live tool indicator will glow blue once the blower/vac is connected to the electric power supply.

Pull the trigger to start the blower/vac.

To stop the blower/vac:

Release the trigger.

VARIABLE SPEED CONTROL

See Figure 8.

You can adjust the speed of the unit by turning the variable speed control clockwise to increase speed or counterclockwise to decrease speed.

WARNING:

Never run the unit without the vacuum tube and vacuum bag installed. Use of an improperly assembled unit could result in serious personal injury.

OPERATING THE BLOWER

See Figure 9.

nTo keep from scattering debris, blow around the outer edges of a debris pile. Never blow directly into the center of a pile.

nTo reduce sound levels, limit the number of pieces of equipment used at any one time.

nUse rakes and brooms to loosen debris before blowing. In dusty conditions, slightly dampen surfaces when water is available.

9 - English

Page 10 Page 12
Image 11
Page 10 Page 12
Contents ALL Versions Toutes LES Versions Todas LAS Versiones Save this Manual for Future ReferenceShoulder strap bandoulière, correa para el hombro Mode, vacuum / mulch mode Introduction Introduction / Introducción Table of Contents Table DES Matières / Índice DE ContenidoRead These Instructions Before Using this BLOWER/VAC Important Safety InstructionsSpecific Safety Instructions Name DESIGNATION/EXPLANATION SymbolsSymbol Signal Meaning Gfci ElectricalDouble Insulation Electrical ConnectionAssembly See Figures 2 Attaching and Extending the BLOWER/VAC TubeAttaching and Removing Vacuum BAG Attaching the Shoulder StrapStarting and Stopping Switching Between Blower Mode and Vacuum ModeOperation ApplicationsEmptying the Vacuum BAG Operating the VacuumStorage 1 Month or Longer MaintenanceGeneral Maintenance Problem Cause Remedy TroubleshootingLimited Warranty Statement WarrantyAVERTISSEMENT  Instructions Importantes Concernant LA SécuritéRègles DE Sécurité Particulières Conserver CES InstructionsSymbole NOM DÉSIGNATION/EXPLICATION SymbolesSymbole Signal Signification Connexions Électriques Caractéristiques ÉlecriquesDouble Isolation AvertissementAssemblage CaractéristiquesVoir les figures 2 et Raccorder ET Retirer LE SAC À DébrisFixation DE LA Bandoulière Démarrage ET Arrêt UtilisationAVERTISSEMENT  Commutation DES Modes Soufflante ET AspirateurVider LE SAC À Débris Utilisation DE L’ASPIRATEUREntretien Général EntretienRemisage 1 Mois OU Plus Dépannage Probléme Cause SolutionÉnoncé DE LA Garantie Limitée GarantieAdvertencia Instrucciones DE Seguridad ImportantesReglas DE Seguridad Específicas Guarde Estas InstruccionesPrecaución SímbolosPeligro AdvertenciaCordones DE Extensión Aspectos EléctricosDoble Aislamiento Conexión EléctricaArmado CaracterísticasVea las figuras 2 y Cómo Conectar Y Extender EL Tubo DE LA SOPLADORA/ASPIRADORACómo Colocar Y Retirar EL Saco DE LA Aspiradora Cómo Colocar LA Correa Para EL HOM- BROArranque Y Apagado FuncionamientoAplicaciones Cómo Alternar Entre EL Modo Sopladora Y EL Modo AspiradoraCómo Vaciar EL Saco DE LA Aspiradora Manejo DE LA AspiradoraAlmacenamiento UN MES O MÁS MantenimientoMantenimiento General Problema Causa Solución Solución DE ProblemasDeclaración DE LA Garantía Limitada GarantíaManuel D’UTILISATION / Manual DEL Operador Electric Blower / Vacuum

RY42110 specifications

The Ryobi RY42110 is a highly efficient and versatile string trimmer, designed to tackle various landscaping tasks with ease. This powerful tool is well-suited for homeowners and landscapers alike, making it an invaluable addition to any outdoor toolkit.

One of the standout features of the RY42110 is its robust 40V Lithium-Ion battery system. This technology provides plenty of power for extended run times, allowing users to complete large jobs without the need for constant recharging. The RY42110 is equipped with a high-efficiency brushless motor that optimizes battery usage and enhances overall performance. This motor delivers impressive torque and speed for a seamless trimming experience.

The design of the RY42110 incorporates a 3-in-1 functionality that can serve as a trimmer, edger, and mini-mower. This versatility is essential for achieving clean and precise cuts along garden beds, driveways, and sidewalks. The adjustable cutting width allows users to customize their trimming operations based on the size and type of vegetation being handled, ensuring efficiency and control.

Another notable characteristic is the lightweight and ergonomic design of the RY42110. Weighing significantly less than traditional gas-powered trimmers, this model ensures reduced operator fatigue during extended use. The comfort grip handle provides added control and minimizes vibration, enhancing user comfort even during long trimming sessions.

The RY42110 also boasts a convenient automatic feed spool feature, which automatically releases new line as needed, eliminating the hassle of manual adjustments. The dual-line cutting system enhances cutting efficiency and allows for a wider trimming path, making quick work of larger areas.

Maintenance is made easy with the engine-free design of the RY42110, eliminating the need for oil changes, air filters, or gas mixing. This environmentally-friendly approach not only reduces upkeep but also contributes to lower emissions, aligning with today's sustainability trends.

In summary, the Ryobi RY42110 is a feature-rich string trimmer that integrates advanced technologies and user-friendly characteristics. With its powerful battery system, brushless motor, versatile functionality, and lightweight design, it stands out as an essential tool for anyone looking to keep their outdoor spaces well-groomed. Whether tackling tough weeds or fine-tuning edges, the RY42110 is engineered to deliver reliable performance for all your landscaping needs.
Top Page Image Contents