Operation, Attaching the Storage Hanger

ASSEMBLY

Tighten the knob securely.

WARNING:

Be certain the knob is fully tightened before operating equipment; check it periodically for tightness during use to avoid serious personal injury.

REMOVING AN ATTACHMENT FROM THE POWER HEAD

For removing or changing the attachment:

Loosen the knob.

Push in the button and twist the shafts to unlock and separate.

ATTACHING THE STORAGE HANGER

See Figure 3.

There are two ways to hang your attachment for storage.

To use the hanger cap, push in the button and place the hanger cap over end of the lower end attachment shaft.

Slightly rotate the cap from side to side until the button locks into place.

The secondary hole in the attachment shaft can be used for hanging purposes as well.

ATTACHING THE FRONT HANDLE

See Figure 4.

Remove wing nut, washer, and bolt from the front handle.

Install the front handle onto the top side of the drive shaft housing in the area indicated by the label.

NOTE: The open side of the handle should face the operator.

Place the bolt through the front handle.

NOTE: The hex bolt head fits inside the hex recess molded into one side of the handle.

Reinstall the washer and wing nut.

Tighten wing nut securely.

OPERATION

WARNING:

Do not allow familiarity with product to make you care- less. Remember that a careless fraction of a second is sufficient to inflict serious injury.

WARNING:

Always wear eye protection with side shields marked to comply with ANSI Z87.1, along with hearing protection. Head protection may also be required depending on the type of attachment used and as prescribed in the attach- ment’s Operator’s Manual. Failure to do so could result in objects being thrown into your eyes and other possible serious injuries.

WARNING:

gasoline and 2-cycle engine lubricant in a clean 1 gallon container approved for gasoline.

Recommended fuel: This engine is certified to operate on unleaded gasoline intended for automotive use.

Mix a high quality 2-cycle engine lubricant at 2.6 oz. per gallon (US).

Do not use automotive lubricant or 2-cycle outboard lubricant.

DO NOT mix quantities larger than usable in a 30 day period.

HIGH QUALITY 2-CYCLE ENGINE LUBRICANT

GASOLINE	LUBRICANT

1 gallon (US)	2.6 oz.
1 liter	20 cc (20 ml)

FILLING TANK

Clean surface around fuel cap to prevent contamination.

Do not use any attachments or accessories not recom- mended by the manufacturer of this product. The use of attachments or accessories not recommended can result in serious personal injury.

FUELING AND REFUELING THE POWER HEAD

FUEL MIXTURE

This product is powered by a 2-cycle engine and requires pre-mixing gasoline and 2-cycle lubricant. Pre-mix unleaded

Loosen fuel cap slowly. Rest the cap on a clean surface.

Carefully pour fuel into the tank. Avoid spillage.

Prior to replacing the fuel cap, clean and inspect the gasket.

Immediately replace fuel cap and hand tighten. Wipe up any fuel spillage.

NOTE: It is normal for smoke to be emitted from a new engine after first use.

7 — English

RY28000 specifications

The Ryobi RY28000 is a versatile and powerful 4-stroke engine products designed to meet the diverse needs of homeowners and professionals alike. This multi-functional tool is particularly popular for its efficiency and ease of use, making it an excellent choice for anyone involved in yard maintenance and landscaping.

One of the standout features of the Ryobi RY28000 is its powerful 30cc engine, which provides ample power for a variety of tasks. This engine runs on unleaded gasoline, eliminating the need for a fuel-oil mixture and making it convenient for users. The 4-stroke technology not only boosts performance but also reduces emissions, making it a more environmentally friendly option.

The RY28000 is equipped with an innovative attachment system that allows it to accept several interchangeable attachments, transforming it into a string trimmer, edger, blower, hedge trimmer, and even a cultivator. This adaptability is a significant advantage, offering users the flexibility to tackle different landscaping jobs with a single tool. The quick-connect coupler ensures easy attachment swaps, saving time and effort.

Another impressive characteristic of the Ryobi RY28000 is its ergonomic design. The lightweight frame reduces operator fatigue, allowing users to work longer periods without discomfort. The tool features comfortable grips and a balanced structure, enhancing maneuverability and making it friendly for various users regardless of their physical strength.

One of the technologies that Ryobi incorporates into the RY28000 is the Auto Return Stop Switch. This feature simplifies restarting the engine as it resets to the ON position automatically, saving users from the hassle of toggling the switch every time they start the tool. Additionally, the RY28000 has a reliable and easy-to-start recoil starter, combining convenience with performance.

Overall, the Ryobi RY28000 is characterized by its robust engine, versatility through attachments, ergonomic design, and user-friendly technology. This tool delivers an excellent combination of power and convenience, making it an essential addition to any homeowner's or professional landscaper's toolkit. Whether tackling overgrown grass, maintaining flower beds, or clearing pathways, the Ryobi RY28000 stands out as a reliable choice for various outdoor projects.