OPERATING
Adjusting Seat
A
MX7698
1.Sit in seat.
2.Lift up on bracket (A).
3.Lean forward and slide seat forward or rearward to desired position. Do not lean back on seat to push rearward.
4.Release bracket to lock in position.
Adjusting Cutting Height
Cutting height can be adjusted from approximately
mm
Mower Setting | Approximate Cutting Height |
|
|
|
|
1 | 25 mm (1 in.) |
|
|
– | 38 mm (1 1/2 in.) |
|
|
2 | 50 mm (2 in.) |
|
|
– | 65 mm (2 1/2 in.) |
|
|
3 | 75 mm (3 in.) |
|
|
– | 90 mm (3 1/2 in.) |
|
|
4 (Transport) | 100 mm (4 in.) |
|
|
A
B
MX7695
1.Put attachment lift lever (A) into the slot adjacent to desired cutting height.
• Slide the height reminder tab (B) to the desired cutting height for the next time you mow.
2.Adjust mower deck wheels.
Adjusting Mower Deck Wheels
cCAUTION: Avoid injury! Rotating blades are dangerous. Before adjusting or servicing mower:
•Disconnect spark plug wire(s) to prevent engine from starting accidently.
•Always wear gloves when handling mower blades or working near blades.
IMPORTANT: Avoid damage! The mower deck can be damaged if mower wheels are adjusted wrong:
•Wheels must not ride on ground supporting mower weight.
•Check wheel adjustment each time cutting height is changed.
1.Park machine safely. (See Parking Safely in the SAFETY section.)
2.Inflate tires to the correct pressure.
3.Lower mower deck to the desired mowing position.
Operating - 11