SERVICE ELECTRICAL
F
C
E
D
BA
M71044
A- Booster Battery
B- Disabled Vehicle Battery
1.Connect positive (+) booster cable to booster battery (A) positive (+) post (C).
2.Connect the other end of positive (+) booster cable to the disabled vehicle battery (B) positive (+) post (D).
3.Connect negative
4.Connect the other end (F) of negative
5.Start the engine of the disabled machine and run machine for several minutes.
6.Carefully disconnect the booster cables in the exact reverse order: negative cable first and then the positive cable.
Replacing Headlight Bulb
1.Park machine safely. (See Parking Safely in the SAFETY section.)
2.Lift hood.
remove.
4.Replace defective bulb with a new bulb.
5.Insert bulb socket into housing, push in and turn 1/4 turn clockwise to install.
6.Lower hood.
Replacing Fuse
1.Park machine safely. (See Parking Safely in the SAFETY section.)
2.Lift hood.
A
MX7686
3.Pull defective fuse (A) out of socket.
4.Check metal clip in fuse window and discard fuse if clip is broken.
5.Push new 20 amp fuse into socket.
6.Lower hood.
A
MX10504
3. Turn bulb socket (A) 1/4 turn counterclockwise to
Service Electrical - 42