Sabo 108-17 HS manual Using Mower Lift Lever, Pushing Machine

OPERATING

Engage Cruise Control Using Mower

A

MX7696

1.Push forward pedal down until you reach desired travel speed.

2.Pull lever (A) up and release forward pedal to lock the cruise control.

Disengage Cruise Control

•Depress brake pedal, tap on forward pedal or push cruise control lever down to the off position.

Using Mower Lift Lever

A

B

MX7695

Transporting or Getting On and Off Machine

•Pull lift lever (A) all the way back to transport position or 100 mm (4 in.) cutting height.

Mowing

•Push attachment lift lever (A) forward into the slot adjacent to the desired cutting height.

•Slide the mower deck height reminder tab (B) to the desired cutting height for the next time you mow.

cCAUTION: Avoid injury! Stay clear of rotating drivelines:

•Entanglement in rotating driveline can cause serious injury or death.

•Wear close fitting clothing.

•Stop the engine and be sure PTO driveline is stopped before getting near it.

•Make sure that all shields are installed and used properly.

1.Start engine and run at half speed for a couple of minutes to warm up.

2.Lower mower to desired cutting height position.

A

B

MX7697

3.Push PTO lever (A) forward to engage mower.

4.Push throttle lever (B) up to the full throttle position.

NOTE: The mower and engine will stop as the reverse foot pedal is depressed with mower engaged.

5. Disengage mower blades before moving in reverse.

Pushing Machine

cCAUTION: Avoid injury! With the free-wheeling valve open, the machine will have unrestricted motion.

•The machine may free-wheel out of control if the free-wheeling valve is opened with the machine on an incline.

•Park the machine on a level surface before opening the free-wheeling valve.

Operating - 21