Polycom CCUG-0100-01 manual Device Parameters, System

Page 10

DEVICE PARAMETERS

DEVICE PARAMETERS

Each device in Conference Composer is represented by a list of sub-entries for that device. For the Vortex, those fields are SYSTEM, MIC/LINE INPUTS, etc. as shown in Figure 4. By clicking on the Device (EF2280:00 in Figure 4) you bring up the SYS- TEM page as shown in Figure 6. Notice that each SYSTEM page has tabs correspond- ing to the list of sub-entries in Figure 4. Clicking on either a tab or the field name will bring you to a page with specific controls for that set of functions.

SYSTEM

Figure 6. Vortex System tab shows the block diagram of the device.

The SYSTEM Page presents you with a block diagram of the Vortex. It allows you to quickly enter text labels for inputs and outputs (this can also be done on all the other pages too), and see the signal flow from inputs to outputs. Holding the cursor over a particular block in the block diagram will show signal flow information from inputs to outputs or outputs to inputs depending on where you hold the mouse. By holding the cursor over any output block, you can see the all the inputs that map to the partic- ular output. You may enable/disable specific features by left clicking on the blocks in the SYSTEM Page. If a block is grayed out, it is turned off.

When connected to a device, the Signal Activity LEDs mapped to the inputs and out- puts of the SYSTEM Page (See Figure 7) show the signal activity. This indicator is independent of the gating indicators -- it simply indicates when the input or output has signal level above the Activity Threshold. The Activity Threshold for what consti- tutes activity is set on the OPTIONS Page -- it is in the MISCELLANEOUS section. If you set this level too high, the threshold may be too high and the signal activity LED will

Conference Composer User Guide

8

Technical Support: 800.932.2774

Page 9 Page 11
Image 10
Page 9 Page 11
Contents Conference Composer User Guide Page Conference ComposerTM Software Conference Composertm Software InstallationUsing Conference Composer with a Vortex and EF200 Phone ADD IntroductionFeatures of the Conference Composer Window Conference Composertm Software Operating Conference Composer Project gen- erated when connected to a Vortex OFF-LINE Operating Without AN EF DeviceOperating Conference Com- poser Offline Device Parameters SystemOptions Device Name MIC/LINE Inputs Input Filters Automixer Exporting the Echo Canceller Reference on EF BUSMatrix Mixer Device Parameters Output Filters OutputsLogic Input Logic Output Diagnostics PresetsMacros File Restoring Project Files and Creating ReportsFile Saving Creating ReportsConsole Window Console TABUpdating Firmware Update Your EF Device Properties TABConsole Window Modem USE with the Vortex Conference Composer On Site with the VortexFrom the Remote SiteTroubleshooting the Vortex Modem Connection Verify That Vortex is Sending Correct Init String
Top Page Image Contents