Polycom CCUG-0100-01 manual Properties TAB, Updating Firmware Update Your EF Device

Page 25

THE CONSOLE WINDOW

PROPERTIES TAB

Figure 18. Properties Tab in the Console Window.

UPDATING FIRMWARE

UPDATE YOUR EF DEVICE

The Properties Tab provides the capability to change flow control and also update the firmware of your EF Device.

The capability to update firmware is included in Conference Composer version 1.62 and higher. Check our website at www.aspi.com for the latest versions of the soft- ware and information on our products.

The latest EchoFree firmware versions are listed below in Table 1.

ECHOFREE DEVICE

LATEST FIRMWARE VERSION

 

 

 

 

EF2280 Vortex

version 1.18

EF1210

version

1.05

EF200

version

1.13

Table 1: Latest firmware versions of EchoFree devices as of 11/15/01.

In Conference Composer software,

1.Connect the RS-232 cable from your computer to the EchoFree device that you are updating. Ensure that your serial port cable is wired with RTS and CTS for hardware flow control. If you do not have RTS and CTS, this process will not work and error messages will be displayed. You can keep the device con-

© Polycom, Inc.

23

Conference Composer User Guide

Image 25
Contents Conference Composer User Guide Page Conference ComposerTM Software Using Conference Composer with a Vortex and EF200 Phone ADD InstallationConference Composertm Software IntroductionFeatures of the Conference Composer Window Conference Composertm Software Operating Conference Composer OFF-LINE Operating Without AN EF Device Project gen- erated when connected to a VortexOperating Conference Com- poser Offline System Device ParametersOptions Device Name MIC/LINE Inputs Input Filters Automixer EF BUS Exporting the Echo Canceller Reference onMatrix Mixer Device Parameters Outputs Output FiltersLogic Input Logic Output Diagnostics PresetsMacros File Saving Project Files and Creating ReportsFile Restoring Creating ReportsConsole TAB Console WindowProperties TAB Updating Firmware Update Your EF DeviceConsole Window Conference Composer On Site with the Vortex Modem USE with the VortexSite From the RemoteVerify That Vortex is Sending Correct Init String Troubleshooting the Vortex Modem Connection