Polycom CCUG-0100-01 manual Project Files and Creating Reports, File Saving, File Restoring

Page 23

PROJECT FILES AND CREATING REPORTS

PROJECT FILES AND CREATING REPORTS

FILE SAVING

When working off-line, you may find it useful to save Project files for archival pur- poses or to allow you to send the configuration to another person. To save a Project file, either left click on the Project and then right click to select SAVE or from the FILE menu, select SAVE PROJECT. Once you enter a file name, you can save the selected Project to disk. A Project file includes all the devices that make up the project. For instance if you have a Project that includes multiple Vortexes and an EF200, then the Project file that is saved to disk will include settings for all the devices. To save the file to a different name, select SAVE AS from the FILE menu.

Presets for the devices in the Project are also stored to the file when working off-line.

FILE RESTORING

You can easily restore the settings from a file to actual EF devices. To restore a Project, first open the Project from the FILE menu. Then when connected to the EF Devices, left click on the Project and select the ONLINE button. This will present a window with the following options: DOWNLOAD SETTINGS FROM THE DEVICE, UPLOAD SETTINGS TO DEVICE, or CANCEL. Select UPLOAD SETTINGS TO DEVICE to upload the Project settings to the device.

You should set the Device IDs on the actual devices to match those in the project before uploading the Project.

Once uploading has started, the display will present a status bar of the progress of uploading. All Presets in the Project will be uploaded along with Project settings.

CREATING REPORTS

Conference Composer can automatically generate reports of a Project, Device Chain, or Device which show all the settings configured for the device. A Project report will consist of the device chains and any devices that are part of the device chain. A device chain report will only include the devices included in the device chain. A device report only includes the settings for that particular device.

Once a report has been selected, the system prompts for whether all the presets should be included in the reports. Select Yes if you would like all the presets to be included in the reports. Select No if you do not want the preset information to be included in the report. In this case you will only report the current operating settings of the device.

Reports may be customized by allowing you to put in a company name and address information. You can enter this information by selecting the Project and type Report tab.

To print the report, you have the option to print directly to a printer and/or to create a Portable Disk Format (PDF) file.

© Polycom, Inc.

21

Conference Composer User Guide

Page 22 Page 24
Image 23
Page 22 Page 24
Contents Conference Composer User Guide Page Conference ComposerTM Software Introduction InstallationUsing Conference Composer with a Vortex and EF200 Phone ADD Conference Composertm SoftwareFeatures of the Conference Composer Window Conference Composertm Software Operating Conference Composer OFF-LINE Operating Without AN EF Device Project gen- erated when connected to a VortexOperating Conference Com- poser Offline System Device ParametersOptions Device Name MIC/LINE Inputs Input Filters Automixer EF BUS Exporting the Echo Canceller Reference onMatrix Mixer Device Parameters Outputs Output FiltersLogic Input Logic Output Macros PresetsDiagnostics Creating Reports Project Files and Creating ReportsFile Saving File RestoringConsole TAB Console WindowProperties TAB Updating Firmware Update Your EF DeviceConsole Window Conference Composer On Site with the Vortex Modem USE with the VortexSite From the RemoteVerify That Vortex is Sending Correct Init String Troubleshooting the Vortex Modem Connection
Top Page Image Contents