Porter-Cable H450IS instruction manual Idle Control, Choose the correct application

Page 13

IDLE CONTROL

Choose the correct application.

1.For normal application such as power tools, small electric appliances, light bulbs, and radios:

Place the idle control switch in the ON position. The generator will idle down when there is no load. This lowers the engine noise, saves on fuel consumption, and engine life.

2.Idling down IS NOT recommend on large motors (refrigerators, freezers, etc) or voltage sensitive electronic equipment (computers, televisions, etc). For these applications:

Place the idle control switch in the OFF position.

12V DC OUTLET

IMPORTANT: Allow generator to run at no load for 5 minutes upon each initial start-up to allow engine to stabilize.

IMPORTANT: When the unit is running the battery will charge. DO NOT connect the 12V DC cables to the generator’s battery.

To charge battery:

1.Using the 12V DC cables supplied, connect the red positive (+) 12V DC cable to the battery's positive (+) terminal.

2.Attach the other end of the red positive (+) 12V DC cable to the generators positive (+) 12V DC outlet.

3.Connect the black negative (-) 12V DC cable to the battery's negative (-) terminal.

4.Attach the other end of the black negative (-) 12V DC cable to the generators negative (-) 12V DC outlet.

5.Charge the battery according to battery or equipment

manufacturer recommendations.

BEFORE START UP

This generator has been shipped from the factory without oil in the crankcase. Operating the unit without oil can damage the engine.

Always check engine oil level before every start. Running engine low of oil or out of oil could result in serious damage to the engine.

Follow the steps listed below before starting generator:

1.Check engine oil. Refer to the Engine Operator's Manual for

correct grade and quantity of oil.

2.Check fuel level, fill as required. Make sure generator is

turned off and has been allowed time to cool down. Use clean, fresh, regular unleaded gasoline with a minimum of 87 octane. Do not mix oil with gasoline.

Never fill fuel tank completely. Fill tank to 1/2" below the bottom of the filler neck to

provide space for fuel expansion. Wipe any fuel spillage from engine and equipment before starting engine.

Never fill fuel tank indoors. Never fill fuel tank when engine is running or hot. Do not smoke when filling fuel tank.

13- ENG

D28512

Page 12 Page 14
Image 13
Page 12 Page 14
Contents Generator Consumer Safety Information Safety Guidelines / DefinitionsImportant Safety Instructions Risk of Electrocution and FireRisk of Electrocution and Fire When installing a DoubleBe used OperationUnit Indoors or in ANY Risk of FireConfined Area Risk of Breathing Inhalation Hazard Risk of Unsafe Operation Risk of Moving Parts Risk of HOT SurfacesRisk from Lifting Specifications Consumer General and Service InformationRead and understand all safety warnings H450ISRemove Generator from Carton AssemblyOther Loose Parts Grounding the GeneratorExtension Cord Wire Gauge Chart Length Size Amperage Double Throw Transfer SwitchObtaining Electricity from the Generator Extension CordsTools needed Assemble SkyhookParts bag contains Know Your Generator OperationChoose the correct application Idle ControlDeadly gas To Start the EngineStopping Engine Connecting Electrical LoadsConnecting Procedure for Raising or Suspending Generator Maintenance Engine Preparation StorageGenerator Determining Wattage Requirements Wattage CalculationsRunning Watts Starting Watts Volts X Amp = Watts Example 120 volts x 10 amps = 1200 watts Starting Wattage RequirementsAppliance or Load Device Typical Device Wattage Total Household Wattage CalculatorStart Troubleshooting GuideResponsibility of Original Purchaser initial User Limited WarrantyQuick Facts

H450IS specifications

The Porter-Cable H450IS is a high-performance, lightweight electric hammer drill designed to meet the needs of both professionals and DIY enthusiasts. Renowned for its versatility and durability, the H450IS is ideal for various applications including drilling in wood, metal, and masonry, as well as for driving screws efficiently.

One of the standout features of the H450IS is its powerful motor that delivers an impressive amount of torque, making it capable of handling tough materials with ease. The tool boasts a variable speed trigger, allowing users to control the speed for precise drilling. This feature is especially beneficial when working with delicate materials that require a gentler touch.

The H450IS is equipped with a dual-mode operation, allowing users to switch between rotary drilling and hammer drilling modes. This flexibility makes it suitable for a range of tasks, from simple household repairs to more complex construction projects. The hammer function, in particular, excels when drilling into hard surfaces like concrete or masonry, making it a valuable tool for contractors and construction workers.

Another key characteristic of the H450IS is its ergonomic design. The tool is equipped with a comfortable grip and a lightweight body, which reduces user fatigue during extended periods of work. Additionally, the integrated side handle provides added control and stability, ensuring accurate drilling and driving.

For improved performance, the H450IS uses advanced technologies such as an automatic clutch system, which helps prevent over-tightening of screws and reduces damage to materials. This feature enhances the longevity of both the tool and the workpiece, making it a reliable choice for professionals who require consistent results.

The durable construction of the H450IS is another highlight, featuring a robust housing that withstands job site conditions. This ensures that the drill remains in peak operational condition even after frequent use in demanding environments.

Overall, the Porter-Cable H450IS is a well-rounded hammer drill that offers a potent combination of power, versatility, and user-friendly features. Its various modes, comfortable design, and reliable performance make it an invaluable addition to any toolbox, whether for professional contractors or aspiring DIYers looking to tackle their next project with confidence.
Top Page Image Contents