Porter-Cable H450IS instruction manual Stopping Engine, Connecting Electrical Loads

Page 15

4.Grasp handle on rope starter and pull slowly until resistance

is felt. Let the rope rewind slowly. Pull rope with a rapid full arm stroke. Let rope rewind slowly. Repeat if necessary.

NOTE: IF ENGINE OIL LEVEL IS TOO LOW, ENGINE WILL NOT START. CHECK OIL LEVEL AND ADD IF NECESSARY.

5.When engine starts, gradually move the choke to the "RUN" position.

IMPORTANT: Allow generator to run at no load for 5 minutes upon each initial start-up to allow engine and generator to stabilize.

STOPPING ENGINE

1. Disconnect all electrical loads.

2.Turn ON/OFF switch to "OFF" position.

3.Close fuel shut-off valve.

CONNECTING ELECTRICAL LOADS

1.Let engine run and warm up for five minutes after starting with no electrical load.

Connect loads in the following manner to prevent damage to equipment:

2.Connect inductive load equipment first, inductive loads consist of refrigerators, freezers, water pumps, air conditioners, or small hand tools. Connect the items that require the most wattage first. See Wattage Calcu- lation Section in this manual.

3.Connect the lights next.

4.Voltage sensitive equipment should be the last equipment connected to the generator. Plug voltage sensitive appliances such at TV's, VCR's, micro- waves, ovens, computers, and cordless telephones into a UL listed voltage surge protector, then connect the UL listed voltage surge protector to the generator.

15- ENG

D28512

Page 14 Page 16
Image 15
Page 14 Page 16
Contents Generator Risk of Electrocution and Fire Safety Guidelines / DefinitionsConsumer Safety Information Important Safety InstructionsOperation When installing a DoubleRisk of Electrocution and Fire Be usedRisk of Fire Unit Indoors or in ANYConfined Area Risk of Breathing Inhalation Hazard Risk of Unsafe Operation Risk of HOT Surfaces Risk of Moving PartsRisk from Lifting H450IS Consumer General and Service InformationSpecifications Read and understand all safety warningsGrounding the Generator AssemblyRemove Generator from Carton Other Loose PartsExtension Cords Double Throw Transfer SwitchExtension Cord Wire Gauge Chart Length Size Amperage Obtaining Electricity from the GeneratorAssemble Skyhook Tools neededParts bag contains Know Your Generator OperationChoose the correct application Idle ControlDeadly gas To Start the EngineStopping Engine Connecting Electrical LoadsConnecting Procedure for Raising or Suspending Generator Maintenance Storage Engine PreparationGenerator Wattage Calculations Determining Wattage RequirementsRunning Watts Starting Watts Volts X Amp = Watts Example 120 volts x 10 amps = 1200 watts Starting Wattage RequirementsAppliance or Load Device Typical Device Wattage Total Household Wattage CalculatorStart Troubleshooting GuideResponsibility of Original Purchaser initial User Limited WarrantyQuick Facts

H450IS specifications

The Porter-Cable H450IS is a high-performance, lightweight electric hammer drill designed to meet the needs of both professionals and DIY enthusiasts. Renowned for its versatility and durability, the H450IS is ideal for various applications including drilling in wood, metal, and masonry, as well as for driving screws efficiently.

One of the standout features of the H450IS is its powerful motor that delivers an impressive amount of torque, making it capable of handling tough materials with ease. The tool boasts a variable speed trigger, allowing users to control the speed for precise drilling. This feature is especially beneficial when working with delicate materials that require a gentler touch.

The H450IS is equipped with a dual-mode operation, allowing users to switch between rotary drilling and hammer drilling modes. This flexibility makes it suitable for a range of tasks, from simple household repairs to more complex construction projects. The hammer function, in particular, excels when drilling into hard surfaces like concrete or masonry, making it a valuable tool for contractors and construction workers.

Another key characteristic of the H450IS is its ergonomic design. The tool is equipped with a comfortable grip and a lightweight body, which reduces user fatigue during extended periods of work. Additionally, the integrated side handle provides added control and stability, ensuring accurate drilling and driving.

For improved performance, the H450IS uses advanced technologies such as an automatic clutch system, which helps prevent over-tightening of screws and reduces damage to materials. This feature enhances the longevity of both the tool and the workpiece, making it a reliable choice for professionals who require consistent results.

The durable construction of the H450IS is another highlight, featuring a robust housing that withstands job site conditions. This ensures that the drill remains in peak operational condition even after frequent use in demanding environments.

Overall, the Porter-Cable H450IS is a well-rounded hammer drill that offers a potent combination of power, versatility, and user-friendly features. Its various modes, comfortable design, and reliable performance make it an invaluable addition to any toolbox, whether for professional contractors or aspiring DIYers looking to tackle their next project with confidence.
Top Page Image Contents