Porter-Cable H450IS instruction manual Assembly, Remove Generator from Carton, Other Loose Parts

Page 9

ASSEMBLY

Read this manual. Do not attempt to operate equipment until you have read this Manual for Safety, Operation, and

Maintenance Instructions.

NOTE: This manual is a general manual. Information in this manual may or may not pertain to your model. Please read carefully.

NOTE: Left and right describes the location of a part with the operator facing the outlet panel.

REMOVE GENERATOR FROM CARTON

•Open carton from top.

•Cut carton along dotted lines.

•Remove all carton inserts.

•Remove generator through opening in carton.

•Remove shipping block(s) from under the

gen head. Unscrew bolt(s) and remove the shipping block(s). It is very important that this is removed before starting your generator.

• See portability Kit instructions to assemble the portability kit.

OTHER LOOSE PARTS

1.Oil is supplied, see engine operators manual for correct procedure to add oil and fuel to engine.

2.The locking plugs maybe used when needed or required.

The locking plugs are to be installed and/or used in accordance with appropriate local electrical code

regulations. Refer to instructions enclosed with each plug for proper installation.

3.12V DC cables to be used with the 12V DC outlets. See Operation section.

IMPORTANT: Before any attempt to start your generator be sure to check engine oil (See Engine Operator's manual)

GROUNDING THE GENERATOR

A grounding lug is supplied with the generator for use when required by local electrical ordinances. Refer to article 250 of the National Electrical Code to clarify any needed grounding information. Your local electric company or a certified electrician should be able to help you with this information.

Grounding Lug

9- ENG

D28512

Page 8 Page 10
Image 9
Page 8 Page 10
Contents Generator Consumer Safety Information Safety Guidelines / DefinitionsImportant Safety Instructions Risk of Electrocution and FireRisk of Electrocution and Fire When installing a DoubleBe used OperationRisk of Fire Unit Indoors or in ANYConfined Area Risk of Breathing Inhalation Hazard Risk of Unsafe Operation Risk of HOT Surfaces Risk of Moving PartsRisk from Lifting Specifications Consumer General and Service InformationRead and understand all safety warnings H450ISRemove Generator from Carton AssemblyOther Loose Parts Grounding the GeneratorExtension Cord Wire Gauge Chart Length Size Amperage Double Throw Transfer SwitchObtaining Electricity from the Generator Extension CordsAssemble Skyhook Tools neededParts bag contains Know Your Generator OperationChoose the correct application Idle ControlDeadly gas To Start the EngineStopping Engine Connecting Electrical LoadsConnecting Procedure for Raising or Suspending Generator Maintenance Storage Engine PreparationGenerator Wattage Calculations Determining Wattage RequirementsRunning Watts Starting Watts Volts X Amp = Watts Example 120 volts x 10 amps = 1200 watts Starting Wattage RequirementsAppliance or Load Device Typical Device Wattage Total Household Wattage CalculatorStart Troubleshooting GuideResponsibility of Original Purchaser initial User Limited WarrantyQuick Facts

H450IS specifications

The Porter-Cable H450IS is a high-performance, lightweight electric hammer drill designed to meet the needs of both professionals and DIY enthusiasts. Renowned for its versatility and durability, the H450IS is ideal for various applications including drilling in wood, metal, and masonry, as well as for driving screws efficiently.

One of the standout features of the H450IS is its powerful motor that delivers an impressive amount of torque, making it capable of handling tough materials with ease. The tool boasts a variable speed trigger, allowing users to control the speed for precise drilling. This feature is especially beneficial when working with delicate materials that require a gentler touch.

The H450IS is equipped with a dual-mode operation, allowing users to switch between rotary drilling and hammer drilling modes. This flexibility makes it suitable for a range of tasks, from simple household repairs to more complex construction projects. The hammer function, in particular, excels when drilling into hard surfaces like concrete or masonry, making it a valuable tool for contractors and construction workers.

Another key characteristic of the H450IS is its ergonomic design. The tool is equipped with a comfortable grip and a lightweight body, which reduces user fatigue during extended periods of work. Additionally, the integrated side handle provides added control and stability, ensuring accurate drilling and driving.

For improved performance, the H450IS uses advanced technologies such as an automatic clutch system, which helps prevent over-tightening of screws and reduces damage to materials. This feature enhances the longevity of both the tool and the workpiece, making it a reliable choice for professionals who require consistent results.

The durable construction of the H450IS is another highlight, featuring a robust housing that withstands job site conditions. This ensures that the drill remains in peak operational condition even after frequent use in demanding environments.

Overall, the Porter-Cable H450IS is a well-rounded hammer drill that offers a potent combination of power, versatility, and user-friendly features. Its various modes, comfortable design, and reliable performance make it an invaluable addition to any toolbox, whether for professional contractors or aspiring DIYers looking to tackle their next project with confidence.
Top Page Image Contents