Porter-Cable D22885-011-0 HOW to USE Wand, Thermal Relief Valve, Pressure Adjustment, Do not

Page 10

Thermal Relief Valve

In an effort to prevent damage, pumps are equipped with a thermal relief valve. This valve will open when the temperature inside the pump rises too high. This valve will then release a gush of water in an effort to lower the temperature inside the pump. Immediately after this occurs, the valve will close.

DO NOT

allow your unit to operate

in bypass mode for more than two minutes at any time. Overheating of pump will cause damage to pump.

Pressure Adjustment

The pressure setting is preset at the factory to achieve optimum pressure and cleaning. If you need to lower the pressure, it can be accomplished by these methods.

1.Back away from the surface to be cleaned. The further away you are, the less the pressure will be on the surface to be cleaned.

2.Reduce the speed of the gasoline engine (RPM). Slow the engine down and the water pressure will go down with it.

Step 3 is for models PCH2627, PCH3030 and PCH3540HR.

3.Adjust the pressure regulator on the pump. Turn the pressure regulator knob counterclockwise to lower pres- sure. Refer to the illustrations to identify your pressure regulator.

Once you have finished using your pressure washer, re- turn the pressure regulator to its original position by turning it clockwise.

DO NOT attempt to increase pump pres-

sure. A higher pressure setting than the factory set pressure may damage pump.

DO NOT try to turn pressure regulator knob

past the built-in stop or damage to pump will result.

HOW TO USE WAND

For Multi-Reg Wands (PCV2021):

Your pressure washer is equipped with a multi-reg wand with both high and low pressure settings. The high pressure setting is for cleaning and rinsing, the low pressure setting is for applying chemicals or cleaning solutions to surfaces.

RISK OF INJECTION OR INJURY TO PERSON.

DO NOT DIRECT DISCHARGE STREAM TOWARD PERSONS.

WHEN USING THE HIGH PRESSURE SETTING,

DO NOT ALLOW THE JET-LIKE SPRAY TO COME IN CONTACT WITH UNPROTECTED SKIN, EYES, OR WITH ANY PETS OR ANI- MALS. SERIOUS INJURY CAN OCCUR.

For high pressure operation, pull back the nozzle of the multi-reg wand as shown.

The nozzle at the end of the multi-reg wand can be rotated to change the high pressure spray pattern from a narrow jet to a 40º fan shape, as shown. Markings have been placed on the nozzle to help you select the spray pattern.

40º fan spray

narrow jet stream

For low pressure operation, extend the nozzle of the multi-reg wand as shown.

D22885

10 — ENG

Page 9 Page 11
Image 10
Page 9 Page 11
Contents Model PCV2021 Model PCH2425 Español Página FrançaisModel PCH3540HR Model PCH2627 Model PCH3030 Table of Contents Safety Guidelines DefinitionsImportant Safety Instructions Hazard What can Happen HOW to Prevent ITRisk to Fluid Pressure Washer Service Policy OWNER’S ResponsibilitiesBOX Contents Assembly To Assemble Accessories Panel PCV2021 Basic Elements of a Pressure Washer Pressure Washer Operating FeaturesOperation Basic Elements of EngineThermal Relief Valve HOW to USE WandPressure Adjustment For Multi-Reg Wands PCV2021For Quick-Connect Turret Wands Spray NozzlesStarting Engine MaintenanceShutting Down PumpMulti-Reg PCV2021 Pump Maintenance ChartNozzle Cleaning Quick Connect Turret PCH2425, PCH2627, PCH3030, PCH3540HRHOW to Clean the Water Inlet Filter HOW to Change Pump OILStorage Engine PumpTroubleshooting Guide Problem Cause CorrectionNo or low pressure after Limited Warranty This Warranty is not Transferable and does not CoverQuick Facts Always Refer to the Manuals Supplied with this Unit

PCH2627, D22885-011-0, PCH3540HR, PCH3030, PCH2425 specifications

Porter-Cable is a brand known for its innovative and reliable power tools, and among its offerings are the PCH3540HR, PCV2021, PCH3030, D22885-011-0, and PCH2627 models. Each of these tools embodies the brand's commitment to quality and performance, catering to both professional contractors and DIY enthusiasts.

The Porter-Cable PCH3540HR is a robust 35 lb 40V cordless hammer drill designed for heavy-duty applications. This model features a brushless motor that not only increases its lifespan but also enhances its efficiency, providing higher power output with less energy consumption. The ergonomic design ensures comfort during extended use, and its variable speed trigger allows for precision in various drilling tasks. The integrated LED work light is a valuable addition, illuminating dark workspaces for better visibility.

The PCV2021 is a versatile 20V cordless vacuum designed for quick clean-up tasks. It is equipped with a powerful motor that delivers strong suction, making it ideal for both indoor and outdoor use. With a lightweight and portable design, it can easily be maneuvered in tight spaces. The washable filter enhances longevity and simplifies maintenance, while the wide variety of attachments makes it suitable for multiple applications, from cleaning floors to upholstery.

Porter-Cable's PCH3030 is a high-performance impact wrench that meets the demands of industrial-grade projects. The tool features an adjustable speed setting, allowing for precise torque control. Its compact design provides ease of access in confined spaces, and the inclusion of a built-in LED light ensures visibility in low-light areas. Additionally, the durable construction and rubber overmold grip enhance comfort and reduce vibration during use.

The D22885-011-0 model is a high-performance compressor that offers consistent power for various pneumatic tools. It features an oil-free pump that reduces maintenance needs while providing a maximum pressure of 135 PSI. The lightweight, portable design includes a dual air outlet, making it easier to work in tandem with other tools. The integrated pressure gauge helps monitor the air pressure for optimal performance.

Lastly, the PCH2627 is a compact cordless angle grinder designed for versatility and performance. It features a high RPM for fast cutting and grinding, paired with a safety guard for user protection. The lightweight design allows for easy maneuverability, while the long-lasting battery enables extended operation without interruption. The tool also offers adjustable speed settings, ensuring it can handle a variety of materials effectively.

In summary, Porter-Cable’s PCH3540HR, PCV2021, PCH3030, D22885-011-0, and PCH2627 models showcase the brand’s dedication to delivering high-quality, efficient, and user-friendly tools tailored to a wide range of needs in both professional and home settings.
Top Page Image Contents