Starting

1.Add fresh high quality unleaded gasoline.

Never fill fuel tank indoors.

Never fill fuel tank when engine is running or hot. Do not smoke when filling fuel tank.

Never fill fuel tank com- pletely. Fill tank to 1/2" below bottom of filler neck to provide space

for fuel expansion. Wipe any fuel spillage from engine and equipment before starting engine.

2.Check engine oil level. See Engine Operator's Manual for correct procedure.

NOTE: Some engines are equipped with a low oil sensor and the correct amount of oil must be added or the engine will not start.

3.Verify the filter screen is in water inlet of pump, as shown.

4.Check pump oil level (if applicable–See Mainte- nance Section.)

5.Connect high pressure hose to pump outlet.

Never pull water supply hose to move pressure

washer. This could damage hose and/or pump inlet.

6. Connect water source to pump inlet.

NOTE: Water source must provide a minimum of 5 gallons per minute at 20 p.s.i.

High

Water

High

High Pressure Hose

Pressure

Source

Pressure

Hose

Water

Source

7.If you are applying a chemical or cleaning solution, See How To Siphon Chemicals/Cleaning Solvents in Operation section of this manual.

8.Turn water source on.

NOTE: Make sure water supply is turned on.

DO NOT use hot water, use

cold water only.

Never turn water supply off while pressure wash-

er engine is running or damage to pump will result.

9.Start engine, see Engine Operator's Manual for correct procedure.

SOME UNITS ARE NOT

EQUIPPED WITH AN E- Z START VALVE. ON THESE UNITS PRES- SURE WILL BUILD IN THE HOSE IF THE ENGINE DOES NOT START AFTER TWO PULLS. IF THE ENGINE DOES NOT START AFTER TWO PULLS, PULL THE TRIGGER TO RELIEVE THE PRESSURE. FAILURE TO DO SO MAY CAUSE DAMAGE TO THE STRAIN RECOIL MECHANISM.

NEVER RUN ENGINE IN-

DOORS OR IN EN- CLOSED, POORLY VENTILATED AREAS. ENGINE EXHAUST CONTAINS CARBON MONOXIDE, AN ODORLESS AND DEADLY GAS.

DO NOT LET HOSES

COME IN CONTACT WITH VERY HOT ENGINE MUFFLER DUR- ING OR IMMEDIATELY AFTER USE OF YOUR PRESSURE WASHER. DAMAGE TO HOSES FROM CONTACT WITH HOT ENGINE SURFACES WILL NOT BE COV- ERED BY WARRANTY.

10.Depress trigger on gun to start water flow. Release trigger to stop water flow.

STAND ON A STABLE

SURFACE AND GRIP GUN/WAND FIRMLY WITH BOTH HANDS. EXPECT THE GUN TO KICK WHEN TRIG- GERED.

11.Adjust nozzle spray for the task being performed. See How To Use Wand instructions in this sec- tion.

DO NOT STOP SPRAY- ING WATER FOR MORE

THAN TWO MINUTES AT A TIME. PUMP OPERATES IN BYPASS MODE WHEN SPRAY GUN TRIGGER IS NOT PRESSED. IF PUMP IS LEFT IN BYPASS MODE FOR MORE THAN TWO MINUTES INTERNAL COMPONENTS OF THE PUMP CAN BE DAMAGED.

WHEN USING THE HIGH

PRESSURE SETTING, DO NOT ALLOW THE HIGH PRESSURE SPRAY TO COME IN CONTACT WITH UNPROTECTED SKIN, EYES, OR WITH ANY PETS OR ANIMALS. SERIOUS INJURY CAN OCCUR.

D22885

12 — ENG

PCH2627, D22885-011-0, PCH3540HR, PCH3030, PCH2425 specifications

Porter-Cable is a brand known for its innovative and reliable power tools, and among its offerings are the PCH3540HR, PCV2021, PCH3030, D22885-011-0, and PCH2627 models. Each of these tools embodies the brand's commitment to quality and performance, catering to both professional contractors and DIY enthusiasts.

The Porter-Cable PCH3540HR is a robust 35 lb 40V cordless hammer drill designed for heavy-duty applications. This model features a brushless motor that not only increases its lifespan but also enhances its efficiency, providing higher power output with less energy consumption. The ergonomic design ensures comfort during extended use, and its variable speed trigger allows for precision in various drilling tasks. The integrated LED work light is a valuable addition, illuminating dark workspaces for better visibility.

The PCV2021 is a versatile 20V cordless vacuum designed for quick clean-up tasks. It is equipped with a powerful motor that delivers strong suction, making it ideal for both indoor and outdoor use. With a lightweight and portable design, it can easily be maneuvered in tight spaces. The washable filter enhances longevity and simplifies maintenance, while the wide variety of attachments makes it suitable for multiple applications, from cleaning floors to upholstery.

Porter-Cable's PCH3030 is a high-performance impact wrench that meets the demands of industrial-grade projects. The tool features an adjustable speed setting, allowing for precise torque control. Its compact design provides ease of access in confined spaces, and the inclusion of a built-in LED light ensures visibility in low-light areas. Additionally, the durable construction and rubber overmold grip enhance comfort and reduce vibration during use.

The D22885-011-0 model is a high-performance compressor that offers consistent power for various pneumatic tools. It features an oil-free pump that reduces maintenance needs while providing a maximum pressure of 135 PSI. The lightweight, portable design includes a dual air outlet, making it easier to work in tandem with other tools. The integrated pressure gauge helps monitor the air pressure for optimal performance.

Lastly, the PCH2627 is a compact cordless angle grinder designed for versatility and performance. It features a high RPM for fast cutting and grinding, paired with a safety guard for user protection. The lightweight design allows for easy maneuverability, while the long-lasting battery enables extended operation without interruption. The tool also offers adjustable speed settings, ensuring it can handle a variety of materials effectively.

In summary, Porter-Cable’s PCH3540HR, PCV2021, PCH3030, D22885-011-0, and PCH2627 models showcase the brand’s dedication to delivering high-quality, efficient, and user-friendly tools tailored to a wide range of needs in both professional and home settings.