Porter-Cable PCH3030, PCV2021 Quick Facts, Always Refer to the Manuals Supplied with this Unit

Page 20

QUICK FACTS

CALL 1-888-559-8550

TO FIND A LOCAL AUTHORIZED SERVICE CENTER NEAR YOU

FOR REPAIRS AND SERVICE PART PURCHASES.

 

GAS

Use fresh high quality gas.

 

Add stabilizer to fuel tank and run engine for 5 minutes before storage.

 

 

 

 

 

 

 

Pump oil: Refer to owners manual supplied with this unit.

 

 

Some units (PCV2021) do not require pump oil.

 

OIL

Engine oil: Refer to engine manual supplied with this unit.

 

 

Some units are equipped with a low oil sensor and adequate oil must be added or the unit

 

 

will not start.

 

 

 

 

 

Use only cold water.

 

WATER

Don't operate unit with clogged or missing water filter/screen.

 

 

Don't operate unit without adequate water supply to pump. Adequate water supply is a

 

 

minimum of 20 psi and 5 gpm.

 

 

 

 

PRESSURE

The pressure setting is preset at the factory to achieve optimum cleaning. If you need to

 

ADJUSTMENT

lower the pressure setting, refer to the owners manual for proper procedure.

 

 

 

 

PUMP

Pull gun trigger every 2 minutes while engine is running.

 

Don't allow water to freeze in pump.

 

 

 

 

Siphon RV antifreeze into pump for cold weather storage or long term storage.

 

 

 

 

BY-PASS MODE

Never leave unit running for more than 2 minutes without pulling gun trigger; doing so will

 

 

destroy pump and void warranty.

 

 

 

 

THERMAL

Pump is equipped with a thermal relief valve. If the water overheats, this valve will open

 

and allow a gush of water to escape. Once the water is released, the valve closes allow-

 

RELIEF VALVE

 

ing the pump to operate normally.

 

 

 

 

 

 

HOSE

Don't allow hoses to contact the HOT engine muffler during or after use.

 

Never pull the hose to move the unit.

 

 

 

 

 

 

 

Do not adjust or attempt maintenance without consulting engine manual or an authorized

 

ENGINE

engine service center.

 

Add stabilizer to fuel tank and run engine for 5 minutes before storage.

 

 

 

 

Always turn on the water before starting the engine.

 

 

 

 

SOAP CHEMICALS

Use only soaps and chemicals designed for pressure washer use.

 

 

 

 

NOZZLE

Keep nozzle unclogged. Refer to manual for cleaning procedures.

 

Chemical/soap cannot be siphoned in high pressure setting. Only in low setting.

 

 

 

 

 

 

MAINTENANCE

Follow recommended maintenance schedule for engine & pump. Refer to manuals.

 

SCHEDULE

 

 

 

 

 

 

 

Draw clean water through chemical inlet.

 

STORAGE OR WIN-

Add stabilizer to fuel tank and run engine for 5 minutes before storage.

 

TER STORAGE

Don't allow water to freeze in pump, gun, wand or hoses.

 

 

Siphon RV antifreeze into pump for cold weather storage or long term storage.

 

 

 

ALWAYS REFER TO THE MANUALS SUPPLIED WITH THIS UNIT

D22885

Page 19 Page 20
Image 20
Page 19 Page 20
Contents Model PCH3540HR Model PCH2627 Model PCH3030 Español Página FrançaisModel PCV2021 Model PCH2425 Table of Contents Safety Guidelines DefinitionsImportant Safety Instructions Hazard What can Happen HOW to Prevent ITRisk to Fluid Pressure Washer Service Policy OWNER’S ResponsibilitiesBOX Contents Assembly To Assemble Accessories Panel PCV2021 Pressure Washer Operating Features OperationBasic Elements of a Pressure Washer Basic Elements of EngineHOW to USE Wand Pressure AdjustmentThermal Relief Valve For Multi-Reg Wands PCV2021For Quick-Connect Turret Wands Spray NozzlesStarting Maintenance Shutting DownEngine PumpPump Maintenance Chart Nozzle CleaningMulti-Reg PCV2021 Quick Connect Turret PCH2425, PCH2627, PCH3030, PCH3540HRHOW to Clean the Water Inlet Filter HOW to Change Pump OILStorage Engine PumpTroubleshooting Guide Problem Cause CorrectionNo or low pressure after Limited Warranty This Warranty is not Transferable and does not CoverQuick Facts Always Refer to the Manuals Supplied with this Unit

PCH2627, D22885-011-0, PCH3540HR, PCH3030, PCH2425 specifications

Porter-Cable is a brand known for its innovative and reliable power tools, and among its offerings are the PCH3540HR, PCV2021, PCH3030, D22885-011-0, and PCH2627 models. Each of these tools embodies the brand's commitment to quality and performance, catering to both professional contractors and DIY enthusiasts.

The Porter-Cable PCH3540HR is a robust 35 lb 40V cordless hammer drill designed for heavy-duty applications. This model features a brushless motor that not only increases its lifespan but also enhances its efficiency, providing higher power output with less energy consumption. The ergonomic design ensures comfort during extended use, and its variable speed trigger allows for precision in various drilling tasks. The integrated LED work light is a valuable addition, illuminating dark workspaces for better visibility.

The PCV2021 is a versatile 20V cordless vacuum designed for quick clean-up tasks. It is equipped with a powerful motor that delivers strong suction, making it ideal for both indoor and outdoor use. With a lightweight and portable design, it can easily be maneuvered in tight spaces. The washable filter enhances longevity and simplifies maintenance, while the wide variety of attachments makes it suitable for multiple applications, from cleaning floors to upholstery.

Porter-Cable's PCH3030 is a high-performance impact wrench that meets the demands of industrial-grade projects. The tool features an adjustable speed setting, allowing for precise torque control. Its compact design provides ease of access in confined spaces, and the inclusion of a built-in LED light ensures visibility in low-light areas. Additionally, the durable construction and rubber overmold grip enhance comfort and reduce vibration during use.

The D22885-011-0 model is a high-performance compressor that offers consistent power for various pneumatic tools. It features an oil-free pump that reduces maintenance needs while providing a maximum pressure of 135 PSI. The lightweight, portable design includes a dual air outlet, making it easier to work in tandem with other tools. The integrated pressure gauge helps monitor the air pressure for optimal performance.

Lastly, the PCH2627 is a compact cordless angle grinder designed for versatility and performance. It features a high RPM for fast cutting and grinding, paired with a safety guard for user protection. The lightweight design allows for easy maneuverability, while the long-lasting battery enables extended operation without interruption. The tool also offers adjustable speed settings, ensuring it can handle a variety of materials effectively.

In summary, Porter-Cable’s PCH3540HR, PCV2021, PCH3030, D22885-011-0, and PCH2627 models showcase the brand’s dedication to delivering high-quality, efficient, and user-friendly tools tailored to a wide range of needs in both professional and home settings.
Top Page Image Contents