Porter-Cable D22885-011-0, PCV2021, PCH2425, PCH3030, PCH3540HR, PCH2627 Risk to Fluid

		HAZARD		WHAT CAN HAPPEN	HOW TO PREVENT IT
			•	Spray directed at electrical outlets or	• Unplug any electrically operated product
				switches, or objects connected to an elec-	before attempting to clean it. Direct spray
RISK OF				trical circuit, could result in a fatal electri-	away from electric outlets and switches.
				cal shock.
ELECTRICAL
	SHOCK
			• Your washer operates at fluid pressures		• Never place hands in front of nozzle.
				and velocities high enough to penetrate	• Direct spray away from self and others.
				human and animal flesh, which could	• Make sure hose and fittings are tightened
	RISK TO FLUID
				result in amputation or other serious	and in good condition. Never hold onto the
		INJECTION		injury. Leaks caused by loose fittings or	hose or fittings during operation.
				worn or damaged hoses can result in in-	• Do not allow hose to contact muffler.
				jection injuries. DO NOT TREAT FLUID IN-	• Never attach or remove wand or hose fittings
				JECTION AS A SIMPLE CUT! See a phy-	while system is pressurized.
				sician immediately!	• Use only hose and high pressure accessories
					rated for pressure higher than your pressure
					washer's p.s.i.
			• Relieve system pressure before attempting		• To relieve system pressure, shut off engine,
				maintenance or disassembly of equip-	turn off water supply, and pull gun trigger until
				ment.	water stops flowing.
			• Use of acids, toxic or corrosive chemicals,		• Do not use acids, gasoline, kerosene, or any
				poisons, insecticides, or any kind of flam-	other flammable materials in this product.
				mable solvent with this product could re-	Use only household detergents,
RISK OF CHEMICAL BURN
				sult in serious injury or death.	cleaners and degreasers recommended for
					use in pressure washers.
					• Wear protective clothing to protect eyes and
					skin from contact with sprayed materials.
					• Do not use chlorine bleach or any other cor-
					rosive compound.
			• Contact with hot surfaces, such as engines		• During operation, touch only the control sur-
				exhaust components, could result in seri-	faces of the pressure washer. Keep children
RISK OF HOT SURFACES				ous burn.	away from the pressure washer at all times.
					They may not be able to recognize the haz-
					ards of this product.

		• Fuel or oil can leak or spill and could	• If pressure washer is equipped with a fuel
		result in fire or breathing hazard, serious	shut-off valve, turn the valve to the off position
RISK OF INJURY AND		injury or death can result. Fuel or oil leaks	before transporting to avoid fuel leaks. If pres-
PROPERTY DAMAGE		will damage carpet, paint or other sur-	sure washer is not equipped with a fuel shut-
		faces in vehicles or trailers.	off valve, drain the fuel from tank before trans-
WHEN TRANSPORTING OR
			porting. Only transport fuel in an OSHA
	STORING
			approved container. Always place pressure
			washer on a protective mat when transporting
			to protect against damage to vehicle from
			leaks. Remove pressure washer from vehicle
			immediately upon arrival at your destination.

The powerful spray from your pressure washer is capable of causing damage to surfaces such as wood, glass, automobile paint, auto striping and trim, and delicate objects such as flowers and

shrubs. Before spraying, check the item to be cleaned to assure yourself that it is strong enough to resist damage from the force of the spray. Avoid the use of the concentrated spray stream except for very strong surfaces like concrete and steel.

Operating without flow of water will result in equipment damage. Operating the pressure washer with water supply shutoff will void your warranty. You should never run this pressure washer for more than 2 minutes without pulling the trigger to allow cool water to enter the pump and the heated (recirculated) water to exit.

D22885 4 — ENG