Porter-Cable D22885-011-0, PCV2021, PCH2425, PCH3030, PCH3540HR, PCH2627 Storage, Engine Pump

Page 16

STORAGE

It is recommended that you follow these steps to pro- tect the internal seals of the pressure washer when storing the unit for an extended period and WHEN FREEZING TEMPERATURES ARE EXPECTED.

ENGINE

1.Consult the Engine Owners Manual for the manu- facturer's recommendations for storage.

PUMP

NOTE: If storing the unit for more than 30 days RV antifreeze needs to be run through the pump. This helps prevent damage within the pump head. RV antifreeze is not only added for winterizing, but for proper lubrication regardless of temperature or en- vironment. Storing the pump less than 30 days does not require the RV antifreeze.

1.Obtain a funnel, six ounces of RV antifreeze, and approximately 12 inches of garden hose with a male hose connector attached to one end.

Use only RV antifreeze. Any other antifreeze is

corrosive and can damage pump.

2.Disconnect spark plug wire.

3.Disconnect high pressure hose from pump and from spray gun.

4.Connect 12 inch length of hose to water inlet of pump.

5. Add RV antifreeze to hose as shown.

6.Pull engine starter rope slowly several times until antifreeze comes out of high pressure hose con- nection of pump.

7.Remove short hose from water inlet of pump.

8.Install spark plug into spark plug hole and tighten securely, then reconnect spark plug wire.

9.Drain all water from high pressure hose, coil it, and store it in cradle of the pressure washer handle.

10.Drain all water from spray gun and wand by hold- ing spray gun in a vertical position with nozzle end pointing down and squeezing trigger. Store in gun/hose holder.

11.Store chemical hose, high pressure hose, spray gun, and wand so they are protected from dam- age, such as being run over.

D22885

16 — ENG

Page 15 Page 17
Image 16
Page 15 Page 17
Contents Model PCV2021 Model PCH2425 Español Página FrançaisModel PCH3540HR Model PCH2627 Model PCH3030 Table of Contents Safety Guidelines DefinitionsImportant Safety Instructions Hazard What can Happen HOW to Prevent ITRisk to Fluid Pressure Washer Service Policy OWNER’S ResponsibilitiesBOX Contents Assembly To Assemble Accessories Panel PCV2021 Pressure Washer Operating Features OperationBasic Elements of a Pressure Washer Basic Elements of EngineHOW to USE Wand Pressure AdjustmentThermal Relief Valve For Multi-Reg Wands PCV2021For Quick-Connect Turret Wands Spray NozzlesStarting Maintenance Shutting DownEngine PumpPump Maintenance Chart Nozzle CleaningMulti-Reg PCV2021 Quick Connect Turret PCH2425, PCH2627, PCH3030, PCH3540HRHOW to Clean the Water Inlet Filter HOW to Change Pump OILStorage Engine PumpTroubleshooting Guide Problem Cause CorrectionNo or low pressure after Limited Warranty This Warranty is not Transferable and does not CoverQuick Facts Always Refer to the Manuals Supplied with this Unit

PCH2627, D22885-011-0, PCH3540HR, PCH3030, PCH2425 specifications

Porter-Cable is a brand known for its innovative and reliable power tools, and among its offerings are the PCH3540HR, PCV2021, PCH3030, D22885-011-0, and PCH2627 models. Each of these tools embodies the brand's commitment to quality and performance, catering to both professional contractors and DIY enthusiasts.

The Porter-Cable PCH3540HR is a robust 35 lb 40V cordless hammer drill designed for heavy-duty applications. This model features a brushless motor that not only increases its lifespan but also enhances its efficiency, providing higher power output with less energy consumption. The ergonomic design ensures comfort during extended use, and its variable speed trigger allows for precision in various drilling tasks. The integrated LED work light is a valuable addition, illuminating dark workspaces for better visibility.

The PCV2021 is a versatile 20V cordless vacuum designed for quick clean-up tasks. It is equipped with a powerful motor that delivers strong suction, making it ideal for both indoor and outdoor use. With a lightweight and portable design, it can easily be maneuvered in tight spaces. The washable filter enhances longevity and simplifies maintenance, while the wide variety of attachments makes it suitable for multiple applications, from cleaning floors to upholstery.

Porter-Cable's PCH3030 is a high-performance impact wrench that meets the demands of industrial-grade projects. The tool features an adjustable speed setting, allowing for precise torque control. Its compact design provides ease of access in confined spaces, and the inclusion of a built-in LED light ensures visibility in low-light areas. Additionally, the durable construction and rubber overmold grip enhance comfort and reduce vibration during use.

The D22885-011-0 model is a high-performance compressor that offers consistent power for various pneumatic tools. It features an oil-free pump that reduces maintenance needs while providing a maximum pressure of 135 PSI. The lightweight, portable design includes a dual air outlet, making it easier to work in tandem with other tools. The integrated pressure gauge helps monitor the air pressure for optimal performance.

Lastly, the PCH2627 is a compact cordless angle grinder designed for versatility and performance. It features a high RPM for fast cutting and grinding, paired with a safety guard for user protection. The lightweight design allows for easy maneuverability, while the long-lasting battery enables extended operation without interruption. The tool also offers adjustable speed settings, ensuring it can handle a variety of materials effectively.

In summary, Porter-Cable’s PCH3540HR, PCV2021, PCH3030, D22885-011-0, and PCH2627 models showcase the brand’s dedication to delivering high-quality, efficient, and user-friendly tools tailored to a wide range of needs in both professional and home settings.
Top Page Image Contents