Problem, Cause, Correction | Porter-Cable D25806-025-2, PCH3600GRC

PROBLEM

Will not draw chemicals

No or low pres- sure (after peri- od of normal use)

Water leaking at gun/wand connection

Water leaking at pump

Oil leaking at pump/gear box

CAUSE

Wand not in low pressure.

Chemical filter clogged.

Chemical screen not in chemical

Chemical too thick.

Pressure hose is too long

Chemical build up in chemical injector.

Worn seal or packing

Worn or obstructed valves.

Worn unloader piston.

Worn E-Z start valve.

Worn or broken o-ring.

Loose hose connection.

Loose connections.

Piston packings worn.

Worn or broken o-rings.

Pump head or tubes damaged from freezing.

Oil seals worn.

Loose drain plug.

Worn drain plug o-ring

Worn fill plug o-ring.

Pump overfilled.

Incorrect oil used.

Vent plug is clogged.

CORRECTION

See How to Use Wand paragraph in the Operation Section.

Clean filter.

Insure end of chemical hose is fully submerged into chemical.

Dilute chemical. Chemical should be the same consistency as water.

Lengthen water supply hose instead of pressure hose.

Have parts cleaned or replaced by AWSC.

Have replaced by AWSC.

Check and replace.

Tighten.

Have replaced by AWSC.

Have replaced by AWSC

Tighten.

Check and replace.

Check for correct amount.

Drain and fill with correct amount and type of oil.

Clean vent plug; blow air through it to remove any blockage. If prob- lem persists, replace plug.

17- ENG

D25806

PCH3600GRC, D25806-025-2 specifications

The Porter-Cable D25806-025-2 and PCH3600GRC are two noteworthy tools designed to enhance productivity and efficiency in various construction and DIY projects. These devices embody the ethos of reliability and performance that Porter-Cable is known for, catering to both professional contractors and serious hobbyists.

The Porter-Cable D25806-025-2 is a powerful 5 amp rotary hammer that excels in drilling through concrete, masonry, and other tough materials. Its robust design features a 1-inch hammering mechanism, delivering a significant impact energy that ensures effective drilling in challenging conditions. The tool is equipped with a variable speed control, allowing users to adjust the speed to match the task at hand. This feature proves particularly useful when transitioning between different materials or when precision is paramount. Additionally, the D25806-025-2 incorporates a durable SDS Plus chuck, enabling quick and easy bit changes with minimal downtime.

One of the standout technologies incorporated into the D25806-025-2 is its anti-vibration system. By minimizing vibrations during operation, this feature significantly enhances user comfort, especially during prolonged use. Moreover, the tool’s two-mode operation allows for efficient switching between rotary hammer and chiseling functions, making it versatile for a variety of applications, from drilling holes to chipping away at existing structures.

On the other hand, the PCH3600GRC is an innovative cordless pancake air compressor that delivers reliable power without the constraints of cords. With its 6-gallon capacity tank and 0.8 SCFM output at 90 PSI, this compressor is ideal for a broad range of air tools. Portability is a prime characteristic of the PCH3600GRC, as it is lightweight and features a handle, making it easy to transport to different job sites.

The compressor also integrates a quiet operation technology, reducing noise levels significantly which is especially beneficial in residential areas or enclosed spaces. Users can expect fewer disturbances while still enjoying a high level of performance. The dual outlet configuration enables multiple tools to be connected simultaneously, enhancing productivity.

In summary, both the Porter-Cable D25806-025-2 and PCH3600GRC represent top-tier engineering and technology innovation. The D25806-025-2 offers substantial power and versatility for heavy-duty tasks, while the PCH3600GRC stands out for its portability and quiet operation, making them essential tools for modern tradespeople and home improvement enthusiasts alike.