Porter-Cable D25806-025-2, PCH3600GRC instruction manual To Siphon CHEMICALS/CLEANING Solvents

Page 11

TO SIPHON CHEMICALS/CLEANING SOLVENTS

Siphoning chemicals or cleaning solvents is a low pressure operation.

NOTE: Use only soaps and chemicals designed for pressure washer use. Do not use bleach.

1. Press chemical hose onto barbed fitting located

Barbed

near high pressure hose connection of pump as

Fitting

shown.

 

 

2.Place other end of chemical hose with filter on it into container holding chemical/cleaning solution.

3.Install low pressure (black) nozzle into quick con- nect fitting of wand, see How To Use Wand para- graph in this section.

4.After use of chemical, siphon clean water through chemical hose to rinse it and pump clean.

Chemicals which remain in pump can damage it. Damage to pump due to

chemicals will not be covered under warranty.

NOTE: Chemicals and soap will not siphon when wand is in the high pressure setting.

READ AND UNDERSTAND ALL WARNINGS BEFORE STARTING UNIT

When using the high pressure setting, DO NOT allow the high pressure spray to come in contact with unprotected skin,

eyes, or with any pets or animals. Serious injury can occur.

Your washer operates at fluid pressures and velocities high enough to penetrate human and animal flesh, which could result in amputation or other serious injury. Leaks caused by loose fittings or worn or damaged hoses can result in injection injuries. DO NOT TREAT FLUID INJECTION AS A SIMPLE CUT! See a physi- cian immediately!

Never fill fuel tank when engine is running or hot. Do not smoke when filling fuel tank.

Never fill fuel tank completely. Fill tank to 1/2" below bottom of filler neck to provide space for fuel expansion. Wipe any fuel spillage from engine and equip- ment before starting engine.

Never run engine indoors or in enclosed, poorly ventilated areas. Engine exhaust contains carbon monoxide, an odorless and deadly gas.

DO NOT let hoses come in contact with very hot engine muffler during or imme- diately after use of your pressure washer. Damage to hoses from contact with hot engine surfaces will NOT be covered by warranty.

Never pull water supply hose to move pressure washer. This could damage hose and/or pump inlet.

DO NOT use hot water, use cold water only.

Never turn water supply off while pressure washer engine is running or damage to pump will result.

DO NOT stop spraying water for more than two minutes at a time. Pump oper- ates in bypass mode when spray gun trigger is not pressed. If pump is left in bypass mode for more than two minutes internal components of the pump can be damaged.

If you do not understand these precautions please call 1-888-559-8550 to speak to a service representative for further instructions.

11- ENG

D25806

Page 10 Page 12
Image 11
Page 10 Page 12
Contents PCH3600GRC ManualGeneral Information Important Safety Instructions Safety Guidelines / DefinitionsHazard What can Happen Never leave wand unattended while unit is running BOX Contents Assembly Pressure Washer OperationPressure Washer Terminology HOW to USETo Adjust Pressure Basic Elements of EngineTo USE Wand Press chemical hose onto barbed fitting located To Siphon CHEMICALS/CLEANING SolventsRead and Understand ALL Warnings Before Starting Unit Release trigger to stop water flow StartingTo Shut Down Pump MaintenanceHow To Change Pump Oil EngineWand HOW to Clean the Water Inlet FilterWindshield washer fluid may also be used Reconnect spark plug wireStorage Engine PumpProblem Causecorrection Troubleshooting GuideCorrection ProblemCause Limited Warranty ENG D25806 Call Quick Facts

PCH3600GRC, D25806-025-2 specifications

The Porter-Cable D25806-025-2 and PCH3600GRC are two noteworthy tools designed to enhance productivity and efficiency in various construction and DIY projects. These devices embody the ethos of reliability and performance that Porter-Cable is known for, catering to both professional contractors and serious hobbyists.

The Porter-Cable D25806-025-2 is a powerful 5 amp rotary hammer that excels in drilling through concrete, masonry, and other tough materials. Its robust design features a 1-inch hammering mechanism, delivering a significant impact energy that ensures effective drilling in challenging conditions. The tool is equipped with a variable speed control, allowing users to adjust the speed to match the task at hand. This feature proves particularly useful when transitioning between different materials or when precision is paramount. Additionally, the D25806-025-2 incorporates a durable SDS Plus chuck, enabling quick and easy bit changes with minimal downtime.

One of the standout technologies incorporated into the D25806-025-2 is its anti-vibration system. By minimizing vibrations during operation, this feature significantly enhances user comfort, especially during prolonged use. Moreover, the tool’s two-mode operation allows for efficient switching between rotary hammer and chiseling functions, making it versatile for a variety of applications, from drilling holes to chipping away at existing structures.

On the other hand, the PCH3600GRC is an innovative cordless pancake air compressor that delivers reliable power without the constraints of cords. With its 6-gallon capacity tank and 0.8 SCFM output at 90 PSI, this compressor is ideal for a broad range of air tools. Portability is a prime characteristic of the PCH3600GRC, as it is lightweight and features a handle, making it easy to transport to different job sites.

The compressor also integrates a quiet operation technology, reducing noise levels significantly which is especially beneficial in residential areas or enclosed spaces. Users can expect fewer disturbances while still enjoying a high level of performance. The dual outlet configuration enables multiple tools to be connected simultaneously, enhancing productivity.

In summary, both the Porter-Cable D25806-025-2 and PCH3600GRC represent top-tier engineering and technology innovation. The D25806-025-2 offers substantial power and versatility for heavy-duty tasks, while the PCH3600GRC stands out for its portability and quiet operation, making them essential tools for modern tradespeople and home improvement enthusiasts alike.
Top Page Image Contents