Porter-Cable PCH3600GRC, D25806-025-2 instruction manual Quick Facts, Call

Page 20

QUICK FACTS

CALL 1-888-559-8550

TO FIND A LOCAL AUTHORIZED SERVICE CENTER NEAR YOU FOR REPAIRS

AND SERVICE PART PURCHASES.

GAS

Use fresh high quality gas.

 

Add stabilizer to fuel tank and run engine for 5 minutes before storage.

 

Pump/gear box oil: Refer to owners manual supplied with this unit.

OIL

Engine oil: Refer to engine manual supplied with this unit.

 

Some units are equipped with a low oil sensor and adequate oil must be

 

added or the unit will not start.

 

 

 

Use only cold water.

WATER

Don't operate unit with clogged or missing water filter/screen.

 

Don't operate unit without adequate water supply to pump. Adequate

 

water supply is a minimum of 20 psi and 5 gpm.

PRESSURE

The pressure setting is preset at the factory to achieve optimum cleaning.

ADJUSTMENT

If you need to lower the pressure setting, refer to the owners manual for

 

proper procedure.

 

 

 

Pull gun trigger every 2 minutes while engine is running.

PUMP

Don't allow water to freeze in pump.

 

Siphon RV antifreeze into pump for cold weather storage or long term

 

storage.

 

 

BY-PASS MODE

THERMAL

RELIEF VALVE

HOSE

ENGINE

SOAP/CHEMICALS

NOZZLE

Never leave unit running for more than 2 minutes without pulling gun trig- ger; doing so may damage pump and void warranty.

Pump is equipped with a thermal relief valve. If the water overheats, this valve will open and allow a gush of water to escape. Once the water is released, the valve closes allowing the pump to operate normally.

Don't allow hoses to contact the HOT engine muffler during or after use. Never pull the hose to move the unit.

Do not adjust or attempt maintenance without consulting engine manual or an authorized engine service center.

Add stabilizer to fuel tank and run engine for 5 minutes before storage. Always turn on the water before starting the engine.

Use only soaps and chemicals designed for pressure washer use.

Keep nozzle unclogged. Refer to manual for cleaning procedures. Chemical/soap cannot be siphoned in high pressure setting. Only in low setting.

MAINTENANCE

SCHEDULE

STORAGE OR WINTERIZING

Follow recommended maintenance schedule for engine & pump. Refer to manuals.

Draw clean water through chemical inlet.

Add stabilizer to fuel tank and run engine for 5 minutes before storage. Don't allow water to freeze in pump, gun, wand or hoses.

Siphon RV antifreeze into pump for cold weather storage or long term storage.

ALWAYS REFER TO THE MANUALS SUPPLIED WITH THIS UNIT

D25806

20- ENG

Image 20
Contents Manual PCH3600GRCGeneral Information Safety Guidelines / Definitions Important Safety InstructionsHazard What can Happen Never leave wand unattended while unit is running BOX Contents Assembly Operation Pressure WasherHOW to USE To Adjust PressureBasic Elements of Engine Pressure Washer TerminologyTo USE Wand Press chemical hose onto barbed fitting located To Siphon CHEMICALS/CLEANING SolventsRead and Understand ALL Warnings Before Starting Unit Release trigger to stop water flow StartingTo Shut Down Maintenance How To Change Pump OilEngine PumpHOW to Clean the Water Inlet Filter WandReconnect spark plug wire StorageEngine Pump Windshield washer fluid may also be usedTroubleshooting Guide Problem CausecorrectionCorrection ProblemCause Limited Warranty ENG D25806 Quick Facts Call

PCH3600GRC, D25806-025-2 specifications

The Porter-Cable D25806-025-2 and PCH3600GRC are two noteworthy tools designed to enhance productivity and efficiency in various construction and DIY projects. These devices embody the ethos of reliability and performance that Porter-Cable is known for, catering to both professional contractors and serious hobbyists.

The Porter-Cable D25806-025-2 is a powerful 5 amp rotary hammer that excels in drilling through concrete, masonry, and other tough materials. Its robust design features a 1-inch hammering mechanism, delivering a significant impact energy that ensures effective drilling in challenging conditions. The tool is equipped with a variable speed control, allowing users to adjust the speed to match the task at hand. This feature proves particularly useful when transitioning between different materials or when precision is paramount. Additionally, the D25806-025-2 incorporates a durable SDS Plus chuck, enabling quick and easy bit changes with minimal downtime.

One of the standout technologies incorporated into the D25806-025-2 is its anti-vibration system. By minimizing vibrations during operation, this feature significantly enhances user comfort, especially during prolonged use. Moreover, the tool’s two-mode operation allows for efficient switching between rotary hammer and chiseling functions, making it versatile for a variety of applications, from drilling holes to chipping away at existing structures.

On the other hand, the PCH3600GRC is an innovative cordless pancake air compressor that delivers reliable power without the constraints of cords. With its 6-gallon capacity tank and 0.8 SCFM output at 90 PSI, this compressor is ideal for a broad range of air tools. Portability is a prime characteristic of the PCH3600GRC, as it is lightweight and features a handle, making it easy to transport to different job sites.

The compressor also integrates a quiet operation technology, reducing noise levels significantly which is especially beneficial in residential areas or enclosed spaces. Users can expect fewer disturbances while still enjoying a high level of performance. The dual outlet configuration enables multiple tools to be connected simultaneously, enhancing productivity.

In summary, both the Porter-Cable D25806-025-2 and PCH3600GRC represent top-tier engineering and technology innovation. The D25806-025-2 offers substantial power and versatility for heavy-duty tasks, while the PCH3600GRC stands out for its portability and quiet operation, making them essential tools for modern tradespeople and home improvement enthusiasts alike.