Porter-Cable PCH2401 Starting, To Shut Down, Verify the filter screen is in water inlet of pump

Page 12

TO SHUT DOWN

IMPORTANT: Read and understand how to shut down the pressure washer before operating.

1.If you have siphoned chemicals, siphon a bucket of clean water through the chemical hose. NOTE: Failure to do so will cause damage to the pump.

2.Refer to engine manual for correct engine shut down procedure.

NOTE: NEVER turn the water off with the engine running.

3.Turn water source off.

4.Pull trigger on spray gun to relieve any water pressure in hose or spray gun.

5.See Storage section in this manual for proper storage procedures.

STARTING

Prior to starting, refer to your engine manual for proper starting procedures for your engine type.

1. In a well ventilated outdoor area Add fresh high quality unleaded gasoline with a pump octane rating of 86 or higher. Do not overfill. Wipe up spilled fuel before starting the engine. Refer to engine manual for correct procedure.

2. Check engine oil level. See Engine Operators Manual for correct procedure.

NOTE: There will be a slight amount of oil in the engine from factory testing.

3. Verify the filter screen is in water inlet of pump.

NOTE: Cone side faces out.

4.Connect water source to pump inlet.

Filter Screen

NOTE: Water source must provide a minimum of 5 gallons per minute at 20 p.s.i.

5.Connect high pressure hose to pump outlet.

6.If applying a chemical or cleaning solution, see How To Siphon Chemicals/Cleaning Solvents in Operation

section of this manual.

High Pressure Hose

7.Turn water source on. NOTE: Make sure water supply is turned on.

8.Start engine. See Engine operators Manual for correct procedure. NOTE: If the engine does not start after two pulls, pull the trigger to relieve the pressure.

9.Depress trigger on gun to start water flow.

NOTE: Stand on a stable surface and grip

 

Water

gun/wand firmly with both hands. Expect the gun to

 

Source

kick when triggered.

 

 

 

 

10.Release trigger to stop water flow.

11.Adjust nozzle spray for the task being performed or change quick connect tip. See How To Use Wand instructions in this section.

D25803

12- ENG

Page 11 Page 13
Image 12
Page 11 Page 13
Contents Instruction General Information Safety Guidelines / Definitions Important Safety InstructionsHazard What can Happen Light or unsecured objects can become hazardous projectiles BOX Contents Assembly Operation Pressure WasherReference HOW to USE To Adjust PressureBasic Elements of Engine Pressure Washer TerminologyTo USE Wand To Siphon CHEMICALS/CLEANING Solvents Read and Understand ALL Warnings Before Starting UnitPress chemical hose onto barbed fitting located Near high pressure hose connection of pump asStarting To Shut DownVerify the filter screen is in water inlet of pump Depress trigger on gun to start water flowMaintenance How To Change Pump OilPump Dapc axial cam If unable to find use 30 W non detergentHOW to Clean the Water Inlet Filter WandReconnect spark plug wire StorageEngine Pump Troubleshooting Guide Problem CausecorrectionProblem Cause Correction ChemicalsLimited Warranty Responsibility of Original Purchaser initial UserENG D25803 Quick Facts Call

D25803-025-1, PCH2401 specifications

The Porter-Cable PCH2401 is a powerful 24-volt cordless hammer drill that offers impressive performance and durability, making it an ideal tool for both DIY enthusiasts and professionals. Its robust design is complemented by advanced technologies that ensure reliability and efficiency in various applications. One of the standout features of the PCH2401 is its high-capacity lithium-ion battery, which provides extended runtime and reduced charging times. This technology allows users to work longer on projects without the constant need for recharging, making it particularly effective for larger tasks.

The PCH2401 is equipped with a variable speed motor, enabling users to easily adjust the speed settings between 0-450 and 0-1700 RPM. This versatility allows for precise control when drilling into different materials, from soft woods to dense metals. Additionally, the integrated hammer function offers an impressive 24,000 BPM for masonry work, making the drill highly effective for drilling into tough surfaces.

Ergonomics play a significant role in the design of the PCH2401. With a lightweight body and an ergonomic grip, the drill is designed for comfort and reduced fatigue over extended use. Its compact size makes it easy to maneuver in tight spaces, allowing users to access difficult-to-reach areas with ease. The inclusion of an LED work light enhances visibility in dimly lit environments, ensuring you can work efficiently without straining your eyes.

Another noteworthy characteristic of the PCH2401 is its durable construction. It is designed to withstand harsh working conditions, with a robust casing that protects vital components from wear and tear. This durability extends the lifespan of the tool, offering excellent value for money.

On the other hand, the D25803-025-1 is a reliable concrete drill bit from the same trusted brand. Designed for optimal performance in masonry applications, it features a carbide tip that provides excellent cutting efficiency and longevity. The bit is engineered to handle heavy-duty jobs, making it suitable for professionals and serious DIY users alike.

Both the Porter-Cable PCH2401 and D25803-025-1 embody the brand's commitment to quality and performance, making them valuable additions to any tool collection. With their advanced features and durable designs, they are poised to tackle a variety of challenging tasks with ease.
Top Page Image Contents