Installation Preparation
MATERIALS YOU WILL NEED:
Materials Required for All Installations
♦90° Elbow (3/8”NPT external thread on one end, opposite
end sized to fit water supply)
Note: Use new ferrule. Do not use old parts.
♦Strain relief for electrical connection
♦Thread seal tape
♦UL Listed wire connectors (3)
♦Screw type hose clamps
Screw Type Clamps
90° Elbow
Wire Nuts | Strain Relief |
Thread Seal
Tape
Materials For New Installations Only:
♦ Air gap for drain hose, if required
♦Waste tee for house plumbing, if applicable
♦ Electrical cable or power cord, if applicable | Electrical Cable | ||
Waste Tee | Valve | ||
or Power Cord | |||
♦ Hand |
|
♦Water line 3/8” min. copper or 1/2” min. plastic (plastic
must be tested for temperature and pressure) ♦ Coupler for extending drain line, if applicable
Air | Coupler |
| |
Gap | Hot Water Line |
TOOLS YOU WILL NEED: | Flat Blade Screwdriver |
Tools Required for All Installations
♦Phillips head and flat blade screwdrivers
♦3/8”, 5/16” and 1/4” nutdrivers
♦ Level |
| Safety Glasses | |
|
| ||
♦ Carpenters square |
|
| |
♦ Measuring tape |
|
| |
♦ Safety glasses | Wire Strippers |
| |
♦ Flashlight | Adjustable | ||
| |||
♦ Bucket to catch water when flushing the line | Wrench | ||
Bucket |
♦Tubing cutter
♦Gloves to protect against sharp edges
♦Wire strippers
For New Installations Only:
| Nut Driver |
Phillips | Head |
Screwdriver | |
| Tubing |
| Cutter |
Flashlight | |
| Drill |
| and Bits |
♦ Drill and appropriate bits ♦ Hole saw set
Measuring Tape
Level
Square |
Hole |
Saw Set |
Gloves
4