GE ZBD6500 Design Information, Product Dimensions, Dishwasher Models, Chef’S Washer Models

Design Information

PRODUCT DIMENSIONS

		34"
		Adjustable
		to 35"
		*Dishwasher model
		ZBD7000 and
		Chef’s Washer
		model ZBD7005
*24"		require a 3/4" thick
	23-7/8"	custom panel and
		will be 24-3/4"

deep.

DISHWASHER MODELS

Traditional Built-In

ZBD6400 BB, Black - Accepts 1/4" or 3/4" custom panels

ZBD6400 WW White - Accepts 1/4" or 3/4" custom panels

Trim Kits for models ZBD6400

•ZPF625W (white) or ZPF625B (black) custom panel kits, supports a 1/4" thick custom door panel.

•ZPF675W (white) or ZPF675B (black) custom panel kits support a 3/4" thick custom door panel.

Traditional Built-In

ZBD6500 SS, Stainless steel door

Professional Series

ZBD6600 SS, Stainless Steel

Fully Wrapped

ZBD6700 BB, Black

ZBD6700 WW, White

ZBD6900 SS, Stainless steel with black controls

Fully Integrated

ZBD7000 II, Requires custom panel and handle ZBD7100 SS, Stainless steel with tubular handle

CHEF’S WASHER MODELS

Professional Series

ZBD6605 SS, Stainless steel

Fully Wrapped

ZBD6905 SS, Stainless steel

Fully Integrated

ZBD7005 II, Requires custom panel and handle ZBD7105 SS, Stainless steel with tubular handle

ADVANCE PLANNING

•These dishwashers are designed for versatility, adaptable to virtually any installation.

•All models have a full length door or a modified door to accept a full cabinet panel without the traditional access panel

•Side tub flange trim is adjustable and will conceal any slight gap between the dishwasher and adjacent cabinetry.

•These dishwashers may be installed beneath countertops of stone or other materials that will not accept screws. No trim kit required.

Standard installation in 24" deep cabinets

•In standard 24" deep cabinets, the dishwasher door will be flush with adjacent cabinetry.

•Models with 3/4" thick custom door panel will fit flush with adjacent cabinetry.

Supplied or Custom Toekicks

•A 2-piece toekick is supplied with all models. The toekick is height and depth adjustable.

•Depending on cabinetry style, a custom toekick can also be installed to match cabinetry. Care must be taken to assure door swing clearance above the toekick.

•A notched continuous toekick may be necessary to allow a long door panel, on models ZBD7000 and ZBD7005, to swing back and under the dishwasher.

ADA-Compliant

Installation below 34" high countertops

A reduced height installation (32-1/2" min.) beneath a 34" countertop, can be accomplished by removing the front leveling legs. The rear legs should be screwed in flush with the bottom support, as shipped. The front of the dishwasher must be shimmed to level the dishwasher. Water and electrical must be routed through the back wall.

•All models are ADA-Compliant. Models ZBD7000 and ZBD7005 offer even more installation and design flexibility because the required custom door panel may be sized from 26-1/4 to 30-1/4" height. See page 9 for details.

3