Porter-Cable PCH2401, D25803-025-1 instruction manual Quick Facts, Call

Page 20

QUICK FACTS

CALL 1-888-559-8550

TO FIND A LOCAL AUTHORIZED SERVICE CENTER NEAR YOU FOR REPAIRS

AND SERVICE PART PURCHASES.

GAS

Use fresh high quality gas.

 

Add stabilizer to fuel tank and run engine for 5 minutes before storage.

 

Pump oil: Refer to owners manual supplied with this unit.

OIL

Engine oil: Refer to engine manual supplied with this unit.

 

Some units are equipped with a low oil sensor and adequate oil must be

 

added or the unit will not start.

 

 

 

Use only cold water.

WATER

Don't operate unit with clogged or missing water filter/screen.

 

Don't operate unit without adequate water supply to pump. Adequate

 

water supply is a minimum of 20 psi and 5 gpm.

 

 

PRESSURE

ADJUSTMENT

PUMP

BY-PASS MODE

THERMAL

RELIEF VALVE

HOSE

ENGINE

SOAP/CHEMICALS

NOZZLE

The pressure setting is preset at the factory to achieve optimum cleaning. If you need to lower the pressure setting, refer to the owners manual for proper procedure.

Pull gun trigger every 2 minutes while engine is running. Don't allow water to freeze in pump.

Siphon RV antifreeze into pump for cold weather storage or long term storage.

Never leave unit running for more than 2 minutes without pulling gun trigger; doing so may damage pump and void warranty.

Pump is equipped with a thermal relief valve. If the water overheats, this valve will open and allow a gush of water to escape. Once the water is released, the valve closes allowing the pump to operate normally.

Don't allow hoses to contact the HOT engine muffler during or after use. Never pull the hose to move the unit.

Do not adjust or attempt maintenance without consulting engine manual or an authorized engine service center.

Add stabilizer to fuel tank and run engine for 5 minutes before storage. Always turn on the water before starting the engine.

Use only soaps and chemicals designed for pressure washer use.

Keep nozzle unclogged. Refer to manual for cleaning procedures. Chemical/soap cannot be siphoned in high pressure setting. Only in low setting.

MAINTENANCE

SCHEDULE

STORAGE OR WINTERIZING

Follow recommended maintenance schedule for engine & pump. Refer to manuals.

Draw clean water through chemical inlet.

Add stabilizer to fuel tank and run engine for 5 minutes before storage. Don't allow water to freeze in pump, gun, wand or hoses.

Siphon RV antifreeze into pump for cold weather storage or long term storage.

ALWAYS REFER TO THE MANUALS SUPPLIED WITH THIS UNIT

D25803

20- ENG

Page 19 Page 20
Image 20
Page 19 Page 20
Contents Instruction General Information Safety Guidelines / Definitions Important Safety InstructionsHazard What can Happen Light or unsecured objects can become hazardous projectiles BOX Contents Assembly Reference OperationPressure Washer HOW to USE To Adjust PressureBasic Elements of Engine Pressure Washer TerminologyTo USE Wand To Siphon CHEMICALS/CLEANING Solvents Read and Understand ALL Warnings Before Starting UnitPress chemical hose onto barbed fitting located Near high pressure hose connection of pump asStarting To Shut DownVerify the filter screen is in water inlet of pump Depress trigger on gun to start water flowMaintenance How To Change Pump OilPump Dapc axial cam If unable to find use 30 W non detergentHOW to Clean the Water Inlet Filter WandEngine Pump Reconnect spark plug wireStorage Troubleshooting Guide Problem CausecorrectionProblem Cause Correction ChemicalsLimited Warranty Responsibility of Original Purchaser initial UserENG D25803 Quick Facts Call

D25803-025-1, PCH2401 specifications

The Porter-Cable PCH2401 is a powerful 24-volt cordless hammer drill that offers impressive performance and durability, making it an ideal tool for both DIY enthusiasts and professionals. Its robust design is complemented by advanced technologies that ensure reliability and efficiency in various applications. One of the standout features of the PCH2401 is its high-capacity lithium-ion battery, which provides extended runtime and reduced charging times. This technology allows users to work longer on projects without the constant need for recharging, making it particularly effective for larger tasks.

The PCH2401 is equipped with a variable speed motor, enabling users to easily adjust the speed settings between 0-450 and 0-1700 RPM. This versatility allows for precise control when drilling into different materials, from soft woods to dense metals. Additionally, the integrated hammer function offers an impressive 24,000 BPM for masonry work, making the drill highly effective for drilling into tough surfaces.

Ergonomics play a significant role in the design of the PCH2401. With a lightweight body and an ergonomic grip, the drill is designed for comfort and reduced fatigue over extended use. Its compact size makes it easy to maneuver in tight spaces, allowing users to access difficult-to-reach areas with ease. The inclusion of an LED work light enhances visibility in dimly lit environments, ensuring you can work efficiently without straining your eyes.

Another noteworthy characteristic of the PCH2401 is its durable construction. It is designed to withstand harsh working conditions, with a robust casing that protects vital components from wear and tear. This durability extends the lifespan of the tool, offering excellent value for money.

On the other hand, the D25803-025-1 is a reliable concrete drill bit from the same trusted brand. Designed for optimal performance in masonry applications, it features a carbide tip that provides excellent cutting efficiency and longevity. The bit is engineered to handle heavy-duty jobs, making it suitable for professionals and serious DIY users alike.

Both the Porter-Cable PCH2401 and D25803-025-1 embody the brand's commitment to quality and performance, making them valuable additions to any tool collection. With their advanced features and durable designs, they are poised to tackle a variety of challenging tasks with ease.
Top Page Image Contents