Porter-Cable PCH2401, D25803-025-1 Troubleshooting Guide, Problem Causecorrection

Page 16

TROUBLESHOOTING GUIDE

PROBLEM

CAUSECORRECTION

Engine will not start (see Engine Manual for further engine troubleshooting)

No or low pressure (initial use)

No fuel.

Low oil (if equipped with low oil shutdown).

Pressure builds up after two pulls on the recoil starter or after initial use.

Not primed or choked.

Spark plug wire not attached.

Engine ON/OFF switch in OFF po- sition (If applicable.)

Choke lever in the “Choke” position on a “hot” engine or an engine that has been exposed to thermal heat for a long period of time.

Fuel valve closed (if equipped)

Wand not in high pressure.

Low water supply.

Leak at high pressure hose.

Nozzle obstructed.

Water filter screen clogged.

Air in hose.

Choke lever in the “Choke” position.

Throttle control lever is not in the “Fast” position. (if equipped)

High pressure hose is too long.

Add Fuel.

Add required amount of oil.

Squeeze gun trigger to relieve pressure.

Push primer bulb 3 times or choke engine.

Attach spark plug wire.

Place engine ON/OFF switch in on position.

Move choke to the “No Choke” position.

Move the fuel valve lever to the “Open” position.

See How to Use Wand paragraph in the Operation Section.

Water supply must be at least 5 GPM @ 20 PSI.

Repair leak. Apply sealant tape if necessary.

Clean nozzle with paper clip or nozzle cleaning tool, pour water into nozzle end to flush out ob- struction.

Remove and clean filter.

Turn off the engine, then the water source. Disconnect the water source from the pump inlet and turn the water source on to remove all air from the hose. When there is a steady stream of water present, turn water source off. Reconnect water source to pump inlet and turn on water source. Squeeze trigger to re- move remaining air.

Move choke to the “No Choke” position.

Move throttle control lever to the “Fast” position.

Use high pressure hose under 100 feet.

D25803

16- ENG

Page 15 Page 17
Image 16
Page 15 Page 17
Contents Instruction General Information Safety Guidelines / Definitions Important Safety InstructionsHazard What can Happen Light or unsecured objects can become hazardous projectiles BOX Contents Assembly Pressure Washer OperationReference HOW to USE To Adjust PressureBasic Elements of Engine Pressure Washer TerminologyTo USE Wand To Siphon CHEMICALS/CLEANING Solvents Read and Understand ALL Warnings Before Starting UnitPress chemical hose onto barbed fitting located Near high pressure hose connection of pump asStarting To Shut DownVerify the filter screen is in water inlet of pump Depress trigger on gun to start water flowMaintenance How To Change Pump OilPump Dapc axial cam If unable to find use 30 W non detergentHOW to Clean the Water Inlet Filter WandStorage Reconnect spark plug wireEngine Pump Troubleshooting Guide Problem CausecorrectionProblem Cause Correction ChemicalsLimited Warranty Responsibility of Original Purchaser initial UserENG D25803 Quick Facts Call

D25803-025-1, PCH2401 specifications

The Porter-Cable PCH2401 is a powerful 24-volt cordless hammer drill that offers impressive performance and durability, making it an ideal tool for both DIY enthusiasts and professionals. Its robust design is complemented by advanced technologies that ensure reliability and efficiency in various applications. One of the standout features of the PCH2401 is its high-capacity lithium-ion battery, which provides extended runtime and reduced charging times. This technology allows users to work longer on projects without the constant need for recharging, making it particularly effective for larger tasks.

The PCH2401 is equipped with a variable speed motor, enabling users to easily adjust the speed settings between 0-450 and 0-1700 RPM. This versatility allows for precise control when drilling into different materials, from soft woods to dense metals. Additionally, the integrated hammer function offers an impressive 24,000 BPM for masonry work, making the drill highly effective for drilling into tough surfaces.

Ergonomics play a significant role in the design of the PCH2401. With a lightweight body and an ergonomic grip, the drill is designed for comfort and reduced fatigue over extended use. Its compact size makes it easy to maneuver in tight spaces, allowing users to access difficult-to-reach areas with ease. The inclusion of an LED work light enhances visibility in dimly lit environments, ensuring you can work efficiently without straining your eyes.

Another noteworthy characteristic of the PCH2401 is its durable construction. It is designed to withstand harsh working conditions, with a robust casing that protects vital components from wear and tear. This durability extends the lifespan of the tool, offering excellent value for money.

On the other hand, the D25803-025-1 is a reliable concrete drill bit from the same trusted brand. Designed for optimal performance in masonry applications, it features a carbide tip that provides excellent cutting efficiency and longevity. The bit is engineered to handle heavy-duty jobs, making it suitable for professionals and serious DIY users alike.

Both the Porter-Cable PCH2401 and D25803-025-1 embody the brand's commitment to quality and performance, making them valuable additions to any tool collection. With their advanced features and durable designs, they are poised to tackle a variety of challenging tasks with ease.
Top Page Image Contents