Powermate P-WB-163150-[E] specifications Children Safety

Page 5

Important Safety Information (Continued)

•Save all instructions

•After striking a foreign object, stop the engine. Remove the wire from the spark plug and keep the wire away from the plug to prevent accidental starting. Thoroughly inspect the blower for any damage. If damaged, have the equipment repaired by a trained technician before restarting and operating.

WARNING

•Stop the engine before cleaning, repairing, or inspecting the unit. Make sure all moving parts have stopped. Let the engine cool, disconnect the spark plug wire and move it away from the spark plug.

•Never attempt to make any adjustments while the engine is running.

•Keep the blower in safe working condition. Check all fasteners at frequent intervals for proper tightness.

•When servicing or repairing the blower, do not tip the machine over or up unless specifically instructed to do so in this

Manual. Service and repair procedures can be done with the blower in an upright position. Some procedures will be easier if the machine is lifted on a raised platform or working surface.

•Use only original equipment or authorized replacement parts.

WARNING

•Never tamper with safety devices. Check their proper operation regularly.

•Do not change the engine governor setting or over-speed engine.

•Clean and replace safety and instruction decals as necessary.

•To guard against engine over-heating, always have engine air filter mounted and clean.

CHILDREN SAFETY

WARNING

•Tragic accidents can occur if the operator is not alert to the presence of children. Children are often attracted to the blower and the leaf clearing activity.

•Keep children out of the area of operation and under the watchful care of a responsible adult.

•Never assume that children will remain where you last saw them.

•Be alert and turn blower off if children enter the area.

•Before and while moving backwards, look behind and down for small children.

•Never allow children to operate the blower.

•Use extra care when operating near blind corners, shrubs, trees, or other objects that may obstruct vision.

Important Safety Information

Questions? Call Toll Free at 1-800-737-2112

4

Copyright © 2009 MAT Engine Technologies, LLC

Page 4 Page 6
Image 5
Page 4 Page 6
Contents Operator’s Manual Cyclone Walk Behind BlowerSafety Warning Symbols Safety DefinitionsControl and Operating Symbols Questions? Call Toll Free atPreparation Safety Important Safety InformationOperation Safety Save all instructionsFuel Safety Save all instructions Operation SafetyStorage Safety REPAIR, MAINTENANCE, and Adjustment SafetyChildren Safety Parts & Features SpecificationsToll Free AssemblyHow to Remove Blower from Carton Engine Oil Ambient Service TemperatureEngine Preparation Before Starting the Engine OperationFuel How to Start Engine How to Adjust the Vertical Flow Angle How to Stop the BlowerHow to Redirect Air Flow toward the Front Operation Save all instructionsTips for Using your Walk Behind Blower Service MaintenanceService Records How to Clean the Air Filter How to Change the Engine OilSpark Plug Model Torch F7RTC How to Check the Spark PlugHow to Prepare for Storage If you need assistance or have any questions, Call Toll Free Technical ServiceProblem Possible Causes Solutions TroubleshootingPowermate Walk Behind Blower Limited Warranty WarrantyEmisson Control System Warranty Warranty Save all instructionsYour Warranty Rightes and Obligations Manufacturer’s Warranty CoverageHow to Obtain Warranty Service WarrantyExclusions Limitations of LiabilitySystems Covered by this Warranty Parts Description Questions? Call Toll Free at Conserve Este Manual Como Referencia Símbolos de alerta para sequradad Definiciones de seguridadSímbolos de advertencia para seguridad Símbolos de control y funcionamientoConserve todas las instrucciones Instrucciones de seguridad importantesResponsabilidad DEL Usuario Seguridad durante la preparaciónSeguridad DEL Combustible Instrucciones de seguridad importantes la siguienteSeguridad DE Niños Seguridad DE AlmacenamientoREPARACIÓN, Mantenimiento Y Seguridad DE Ajuste Copyright 2009 MAT Engine Technologies, LLC EspecificacionesPiezas y características Cómo montar el asidero MontajeCómo sacar el soplador de la caja Aceite de motor Preparción del motorUso Preparción del motor la siguienteCombustible Antes de arrancar el motorCómo arrancar el motor Antes de arrancar el motor la siguienteCómo ajustar el ángulo de caudal vertical Uso la siguienteConsejos Para Bordear Uso la siguiente Conserve todas las instruccionesPrograma de mantenimiento MantenimientoCómo limpiar al filtro de aire Mantenimiento la siguienteCómo cambiar el aceite del motor Cómo preparala para almacenamiento Modelo de bujía Torch F7RTCSi necesita ayuda o tiene una duda Llame SIN Costo AL Servicio técnicoWildlife Way Long Grove, IL Problema Causas Posibles Soluciones Diagnóstico y resolución de problemasGarantía Powermate Soplador de operación a pie Limited WarrantyGarantía del sistema pro control de emisiones contaminantes Garantía la siguiente Conserve todas las instruccionesDerechos y obligaciones al amparo de la garantía Cobertura de la garantía del fabricanteCómo obtener servicio de garantía Cobertura de la garantíaExclusiones Limitación de responsabilidadGarantía la siguiente Llame sin costo al

P-WB-163150, P-WB-163150-[E] specifications

The Powermate P-WB-163150-[E],P-WB-163150 is a high-performance water-based air compressor designed to meet the needs of various applications, including professional and DIY projects. This versatile compressor stands out due to its robust construction and innovative features, making it an essential tool for both contractors and hobbyists.

One of the primary features of the Powermate P-WB-163150 is its powerful motor, providing a reliable source of compressed air for numerous tasks. With a maximum pressure of up to 150 PSI, it can easily handle heavy-duty applications like spray painting, inflating tires, or operating pneumatic tools. This wide pressure range gives users the flexibility to adapt the compressor for different tools and projects, ensuring optimal performance.

The compressor's water-based technology is another highlight, setting it apart from traditional oil-based compressors. This innovative design not only contributes to a more environmentally friendly operation but also minimizes maintenance requirements. Users can enjoy lower operating costs and less hassle, as there is no need for regular oil changes. This feature enhances the overall user experience, allowing for longer work periods without interruptions.

Additionally, the Powermate P-WB-163150 features a compact and portable design, equipped with a sturdy handle and wheels for easy transport. This mobility ensures that users can take the compressor to various job sites or store it conveniently when not in use. Its lightweight construction does not compromise durability, as the materials used are designed to withstand the rigors of frequent use.

Another key characteristic of this model is its noise reduction technology. The compressor operates at a reduced noise level, making it suitable for residential areas where excessive noise could be an issue. This feature is particularly beneficial for users who require an efficient compressor without disturbing the neighbors.

With user-friendly controls, the Powermate P-WB-163150 is designed for ease of use. The intuitive interface and clear gauges allow users to monitor pressure levels effortlessly, ensuring a smooth operation. Combined with safety features like thermal overload protection, this compressor prioritizes user safety while enhancing operational efficiency.

In summary, the Powermate P-WB-163150-[E],P-WB-163150 offers a perfect blend of power, portability, and user-friendly design, making it an ideal choice for anyone in need of a reliable air compressor. Its water-based technology, robust construction, and innovative features cater to a wide range of applications while ensuring a seamless user experience.
Top Page Image Contents