Powermate P-WB-163150-[E] specifications Assembly, Toll Free, How to Remove Blower from Carton

Page 7

Assembly

• Save all instructions

 

If you need assistance or find any parts missing, CALL

 

 

 

 

 

TOLL FREE: 1-800-737-2112.

 

 

 

Read and follow the assembly instructions. Do not discard any parts or materials until the unit is assembled. References to the right or left side of the blower are from the viewpoint of the operator’s position behind the blower.

WARNING

Do not operate blower if it is damaged or not completely and correctly assembled.

WARNING

Before doing any assembly or maintenance to the unit, remove the wire from the spark plug.

WARNING

Always wear ANSI compliant safety glasses with side shields while assembling the blower.

The following components will be found in the carton.

Quantities shown in ( ).

1. (1) Walk Behind Blower

2. (1) Blower Operator’s Manual

3. (1) Handle

4. (1) Front Flow Attachment (stored under the frame)

5. (1) Bottle of SAE 30 Engine Oil

6. (1) Parts bag containing the following:

(2) Plastic Wing Nuts (M8)

(2) M8x35mm Pipe Bolts

(1) Spark plug socket wrench w/ rod

A How to Remove Blower from Carton

1.Remove all parts and packaging components.

2.Use a utility knife to cut all 4 vertical edges and lay the side panels flat around the blower.

3.Remove any remaining packaging.

4.Roll the unit out from the carton, and place on a hard level surface.

Upper

Tube Hole

Middle

Tube Hole

B How to Assemble the Handle

 

 

 

NOTE: There are two positions in which the handle can be

 

 

 

 

Handle

Frame Tubing

attached – a high position and a low position. (See Figure 2)

 

1. Assemble the handle tabs into the holes on the lower

 

Plastic

Pipe Bolt

frame tubing. Use the bottom holes for the low handle

 

 

 

Wing Nut

 

position. Use the middle holes for the high handle

 

 

 

 

 

position. (See Figure 2)

 

 

 

2. Secure the handle onto the frame tubing with the (2) pipe

 

 

 

bolts and the (2) plastic wing nuts. Firmly hand-tighten

 

 

 

the wing nuts. (See Figure 2)

 

Handle Tab

 

 

 

Bottom

Figure 2

 

 

Tube Hole

Questions? Call Toll Free at 1-800-737-2112

6

 

Copyright © 2009 MAT Engine Technologies, LLC

Page 6 Page 8
Image 7
Page 6 Page 8
Contents Operator’s Manual Cyclone Walk Behind BlowerQuestions? Call Toll Free at Safety DefinitionsSafety Warning Symbols Control and Operating SymbolsSave all instructions Important Safety InformationPreparation Safety Operation SafetyREPAIR, MAINTENANCE, and Adjustment Safety Save all instructions Operation SafetyFuel Safety Storage SafetyChildren Safety Parts & Features SpecificationsHow to Remove Blower from Carton AssemblyToll Free Engine Preparation Ambient Service TemperatureEngine Oil Fuel OperationBefore Starting the Engine How to Start Engine Operation Save all instructions How to Stop the BlowerHow to Adjust the Vertical Flow Angle How to Redirect Air Flow toward the FrontTips for Using your Walk Behind Blower Service Records MaintenanceService How to Clean the Air Filter How to Change the Engine OilHow to Prepare for Storage How to Check the Spark PlugSpark Plug Model Torch F7RTC If you need assistance or have any questions, Call Toll Free Technical ServiceProblem Possible Causes Solutions TroubleshootingPowermate Walk Behind Blower Limited Warranty WarrantyManufacturer’s Warranty Coverage Warranty Save all instructionsEmisson Control System Warranty Your Warranty Rightes and ObligationsLimitations of Liability WarrantyHow to Obtain Warranty Service ExclusionsSystems Covered by this Warranty Parts Description Questions? Call Toll Free at Conserve Este Manual Como Referencia Símbolos de control y funcionamiento Definiciones de seguridadSímbolos de alerta para sequradad Símbolos de advertencia para seguridadSeguridad durante la preparación Instrucciones de seguridad importantesConserve todas las instrucciones Responsabilidad DEL UsuarioSeguridad DEL Combustible Instrucciones de seguridad importantes la siguienteREPARACIÓN, Mantenimiento Y Seguridad DE Ajuste Seguridad DE AlmacenamientoSeguridad DE Niños Piezas y características EspecificacionesCopyright 2009 MAT Engine Technologies, LLC Cómo sacar el soplador de la caja MontajeCómo montar el asidero Aceite de motor Preparción del motorAntes de arrancar el motor Preparción del motor la siguienteUso CombustibleCómo arrancar el motor Antes de arrancar el motor la siguienteCómo ajustar el ángulo de caudal vertical Uso la siguienteConsejos Para Bordear Uso la siguiente Conserve todas las instruccionesPrograma de mantenimiento MantenimientoCómo cambiar el aceite del motor Mantenimiento la siguienteCómo limpiar al filtro de aire Cómo preparala para almacenamiento Modelo de bujía Torch F7RTCWildlife Way Long Grove, IL Servicio técnicoSi necesita ayuda o tiene una duda Llame SIN Costo AL Problema Causas Posibles Soluciones Diagnóstico y resolución de problemasGarantía Powermate Soplador de operación a pie Limited WarrantyCobertura de la garantía del fabricante Garantía la siguiente Conserve todas las instruccionesGarantía del sistema pro control de emisiones contaminantes Derechos y obligaciones al amparo de la garantíaLimitación de responsabilidad Cobertura de la garantíaCómo obtener servicio de garantía ExclusionesGarantía la siguiente Llame sin costo al

P-WB-163150, P-WB-163150-[E] specifications

The Powermate P-WB-163150-[E],P-WB-163150 is a high-performance water-based air compressor designed to meet the needs of various applications, including professional and DIY projects. This versatile compressor stands out due to its robust construction and innovative features, making it an essential tool for both contractors and hobbyists.

One of the primary features of the Powermate P-WB-163150 is its powerful motor, providing a reliable source of compressed air for numerous tasks. With a maximum pressure of up to 150 PSI, it can easily handle heavy-duty applications like spray painting, inflating tires, or operating pneumatic tools. This wide pressure range gives users the flexibility to adapt the compressor for different tools and projects, ensuring optimal performance.

The compressor's water-based technology is another highlight, setting it apart from traditional oil-based compressors. This innovative design not only contributes to a more environmentally friendly operation but also minimizes maintenance requirements. Users can enjoy lower operating costs and less hassle, as there is no need for regular oil changes. This feature enhances the overall user experience, allowing for longer work periods without interruptions.

Additionally, the Powermate P-WB-163150 features a compact and portable design, equipped with a sturdy handle and wheels for easy transport. This mobility ensures that users can take the compressor to various job sites or store it conveniently when not in use. Its lightweight construction does not compromise durability, as the materials used are designed to withstand the rigors of frequent use.

Another key characteristic of this model is its noise reduction technology. The compressor operates at a reduced noise level, making it suitable for residential areas where excessive noise could be an issue. This feature is particularly beneficial for users who require an efficient compressor without disturbing the neighbors.

With user-friendly controls, the Powermate P-WB-163150 is designed for ease of use. The intuitive interface and clear gauges allow users to monitor pressure levels effortlessly, ensuring a smooth operation. Combined with safety features like thermal overload protection, this compressor prioritizes user safety while enhancing operational efficiency.

In summary, the Powermate P-WB-163150-[E],P-WB-163150 offers a perfect blend of power, portability, and user-friendly design, making it an ideal choice for anyone in need of a reliable air compressor. Its water-based technology, robust construction, and innovative features cater to a wide range of applications while ensuring a seamless user experience.
Top Page Image Contents