Poulan 183384 owner manual Table of Contents

Page 4

PRODUCT SPECIFICATIONS

GASOLINE CAPACITY

2.00 GALLONS

 

AND TYPE:

UNLEADED REGULAR

 

 

 

OIL TYPE (API-SF-SJ):

SAE 30 (above 32°F)

 

 

SAE 5W-30 (below 32°F)

 

 

 

OIL CAPACITY:

W/ FILTER:

4.0 PINTS

 

W/O FILTER:

3.75 PINTS

 

 

 

SPARK PLUG:

CHAMPION RC12YC

 

(GAP: .040")

 

 

 

 

 

 

 

GROUND SPEED (MPH):

FORWARD:

 

 

 

 

1st

1.2

 

 

2nd

1.5

 

 

3rd

2.4

 

 

4th

3.5

 

 

5th

4.8

 

 

6th

5.3

 

REVERSE:

1.5

 

 

 

 

TIRE PRESSURE:

FRONT:

14 PSI

 

 

REAR:

10 PSI

 

 

 

 

CHARGING

16 Amps @ 3600 RPM

 

 

 

 

 

BATTERY:

AMP/HR:

35

 

 

MIN. CCA:

280

 

 

CASE SIZE:

U1R

 

 

 

 

BLADE BOLT TORQUE:

27-35 FT. LBS.

 

 

 

 

 

CONGRATULATIONS on your purchase of a new tractor. It has been designed, engineered and manufactured to give you the best possible dependability and performance.

Should you experience any problem you cannot easily remedy, please contact your nearest authorized service center/department. We have competent, well-trained tech- nicians and the proper tools to service or repair this tractor.

Please read and retain this manual. The instructions will enable you to assemble and maintain your tractor properly. Always observe the “SAFETY RULES”.

CUSTOMER RESPONSIBILITIES

Read and observe the safety rules.

Follow a regular schedule in maintaining, caring for and using your tractor.

Follow the instructions under “Customer Responsibili- ties” and “Storage” sections of this owner’s manual.

WARNING: This tractor is equipped with an internal com- bustion engine and should not be used on or near any unimproved forest-covered, brush-covered or grass-cov- ered land unless the engine’s exhaust system is equipped with a spark arrester meeting applicable local or state laws (if any). If a spark arrester is used, it should be maintained in effective working order by the operator.

A spark arrester for the muffler is available through your nearest authorized service center/department (See REPAIR PARTS section of this manual).

In the state of California the above is required by law (Section 4442 of the California Public Resources Code). Other states may have similar laws. Federal laws apply on federal lands.

TABLE OF CONTENTS

SAFETY RULES

2-3

PRODUCT SPECIFICATIONS

4

CUSTOMER RESPONSIBILITIES

4, 14-17

ASSEMBLY

6-8

OPERATION

9-13

MAINTENANCE SCHEDULE

14

SERVICE AND ADJUSTMENTS

18-23

STORAGE

24

TROUBLESHOOTING

25-26

REPAIR PARTS

28-43

WARRANTY

45

4

Image 4
Contents PR17542STC Safety Rules IV. ServiceGeneral Operation II. Slope OperationSafety Rules Safe Operation Practices for Ride-On MowersTable of Contents Unassembled Hardware Steering WheelSeat Keys Slope SheetAssembly Tools Required for AssemblyHOW to SET UP Your Tractor To Remove Tractor from CartonInstall Seat See Fig To SET UP Your Mower for Mulching To Convert to Bagging or DischargingCheck Tire Pressure Check Deck LevelnessOperation Know Your Tractor HOW to USE Your Tractor Before Starting the Engine To Start Engine See Fig Mowing TipsMulching Mowing Tips General Recommendations Lubrication Chart Service DatesCustomer Responsibilities Before Each USETractor Engine Cleaning Engine OIL FilterMuffler Spark PlugsTo Install Mower see FIG Service and AdjustmentsTo Remove Mower see FIG To Level Mower Housing FRONT-TO-BACK Adjustment See FigsTo Adjust Brake See Fig Belt InstallationTo Replace Mower Blade Drive Belt See Fig To Replace Motion Drive Belt See FigTransaxle Gear Shift Lever Neutral Adjustment See Fig To Adjust Steering Wheel AlignmentTo Start Engine with a Weak Battery See Fig Front Wheel TOE-IN/CAMBERReplacing Battery See Figs To Remove Hood and Grill Assembly See FigTo Replace Headlight Bulb Interlocks and RelaysTo Adjust Choke Control See Fig To Adjust Throttle Control Cable See FigTo Adjust Carburetor Storage OtherFuel System Engine OILTroubleshooting Points Problem Cause CorrectionWhen operator leaves Schematic Tractor - Model Number PR17542STC, Product Number 954 56Electrical KEY Part NO. NO. Description Chassis and Enclosures KEY Part Description Drive Repair Parts Steering Assembly Adaptor Wheel Strg Seat Assembly Decals Wheels and TiresEngine 170771 Control Th/ch Flag Mower Deck Repair Parts Mower Lift 159460 Wire Asm Inner/Sprg W/plunger LT Page Limited Warranty Policy Fold Along This Dotted Line Degree Only Ride UP and Down Hill Not Across Hill Degrees MAXParts and Service

183384 specifications

The Poulan 183384 is a robust, high-performance chainsaw that is designed for both professional and home-use applications. It stands out in the market due to its combination of power, durability, and user-friendly features that make it an ideal choice for a variety of cutting tasks, from trimming shrubs to felling larger trees.

One of the main features of the Poulan 183384 is its powerful engine. Equipped with a reliable two-stroke engine, this chainsaw delivers ample power to handle demanding cutting jobs with ease. The high engine speed ensures fast cutting performance, reducing the time needed for each job and making it an efficient tool for both casual users and seasoned professionals.

In terms of design, the Poulan 183384 boasts an ergonomic build that prioritizes user comfort. The handles are designed for a secure grip, which enhances control and reduces fatigue during extended periods of use. Additionally, its lightweight construction makes it easy to maneuver, allowing for better handling and precision while cutting.

Safety features are crucial in chainsaw operation, and the Poulan 183384 does not disappoint. It is equipped with a chain brake that instantly stops the chain rotation in the event of kickback, minimizing the risk of accidents. The chainsaw also features an adjustable oil pump, which allows users to control the amount of oil distributed to the chain, ensuring optimal lubrication and extending the life of both the chain and the bar.

The innovative anti-vibration technology integrated into the Poulan 183384 minimizes vibrations during operation, enhancing user comfort and control. This technology is particularly beneficial for users who need to work for extended periods, as it helps reduce strain on the hands and arms, ultimately making the task more enjoyable.

Maintenance is made easy with the Poulan 183384, as it features a tool-less chain tensioning system. This allows users to adjust the chain tension quickly and without the need for additional tools, ensuring that the chainsaw is always ready for optimal performance.

Overall, the Poulan 183384 stands as a reliable, efficient, and user-friendly option for anyone in need of a powerful chainsaw. Whether for professional landscaping, forestry work, or simply maintaining a home garden, it is equipped to handle a wide variety of tasks with precision and ease.