Poulan 183384 owner manual Install Seat See Fig

Page 7

ASSEMBLY

SEAT PAN

LABEL

FIG. 2

INSTALL SEAT (See Fig. 3)

Adjust seat before tightening adjustment knob.

•Remove adjustment knob and flat washer securing seat to cardboard packing and set aside for assembly of seat to tractor.

•Pivot seat upward and remove from the cardboard packing. Remove the cardboard packing and discard.

•Place seat on seat pan so head of shoulder bolt is positioned over large slotted hole in pan.

•Push down on seat to engage shoulder bolt in slot and pull seat towards rear of tractor.

•Pivot seat and pan forward and assemble adjustment knob and flat washer loosely. Do not tighten.

•Lower seat into operating position and sit on seat.

•Slide seat until a comfortable position is reached which allows you to press clutch/brake pedal all the way down.

•Get off seat without moving its adjusted position.

•Raise seat and tighten adjustment knob securely.

SEAT

SEAT PAN

SHOULDER

BOLT

FLAT WASHER

ADJUSTMENT

KNOB

FIG. 3

NOTE: You may now roll or drive your tractor off the skid. Follow the appropriate instruction below to remove the tractor from the skid.

TO ROLL TRACTOR OFF SKID (See Opera- tion section, page 10, for location and function of controls)

•Press lift lever plunger and raise attachment lift lever to its highest position.

•Release parking brake by depressing clutch/brake pedal.

•Place gearshift lever in neutral (N) position.

•Roll tractor forward off skid.

•Remove banding holding deflector shield up against tractor.

TO DRIVE TRACTOR OFF SKID (See Opera- tion section, page 10, for location and func- tion of controls)

WARNING: Before starting, read, understand and follow all instructions in the Operation section of this manual. Be sure tractor is in a well-ventilated area. Be sure the area in front of tractor is clear of other people and objects.

•Be sure all the above assembly steps have been completed.

•Check engine oil level and fill fuel tank with gasoline.

•Sit on seat in operating position, depress clutch/brake pedal and set the parking brake.

•Place gear shift lever in neutral (N) position.

•Press lift lever plunger and raise attachment lift lever to its highest position.

•Start the engine. After engine has started, move throttle control to idle position.

•Depress clutch/brake pedal into full “BRAKE” position and hold. Move gearshift lever to 1st gear.

•Slowly release clutch/brake pedal and slowly drive tractor off skid.

•Apply brake to stop tractor, set parking brake and place gearshift lever in neutral position.

•Turn ignition key to “OFF” position.

Continue with the instructions that follow.

7

Page 6 Page 8
Image 7
Page 6 Page 8
Contents PR17542STC II. Slope Operation Safety RulesIV. Service General OperationSafe Operation Practices for Ride-On Mowers Safety RulesTable of Contents Keys Slope Sheet Unassembled HardwareSteering Wheel SeatTo Remove Tractor from Carton AssemblyTools Required for Assembly HOW to SET UP Your TractorInstall Seat See Fig Check Deck Levelness To SET UP Your Mower for MulchingTo Convert to Bagging or Discharging Check Tire PressureOperation Know Your Tractor HOW to USE Your Tractor Before Starting the Engine To Start Engine See Fig Mowing TipsMulching Mowing Tips Before Each USE General Recommendations Lubrication ChartService Dates Customer ResponsibilitiesTractor Engine Spark Plugs CleaningEngine OIL Filter MufflerTo Install Mower see FIG Service and AdjustmentsTo Remove Mower see FIG FRONT-TO-BACK Adjustment See Figs To Level Mower HousingTo Replace Motion Drive Belt See Fig To Adjust Brake See FigBelt Installation To Replace Mower Blade Drive Belt See FigFront Wheel TOE-IN/CAMBER Transaxle Gear Shift Lever Neutral Adjustment See FigTo Adjust Steering Wheel Alignment To Start Engine with a Weak Battery See FigInterlocks and Relays Replacing Battery See FigsTo Remove Hood and Grill Assembly See Fig To Replace Headlight BulbTo Adjust Choke Control See Fig To Adjust Throttle Control Cable See FigTo Adjust Carburetor Engine OIL StorageOther Fuel SystemProblem Cause Correction Troubleshooting PointsWhen operator leaves Tractor - Model Number PR17542STC, Product Number 954 56 SchematicElectrical KEY Part NO. NO. Description Chassis and Enclosures KEY Part Description Drive Repair Parts Steering Assembly Adaptor Wheel Strg Seat Assembly Wheels and Tires DecalsEngine 170771 Control Th/ch Flag Mower Deck Repair Parts Mower Lift 159460 Wire Asm Inner/Sprg W/plunger LT Page Limited Warranty Policy Only Ride UP and Down Hill Not Across Hill Degrees MAX Fold Along This Dotted Line DegreeParts and Service

183384 specifications

The Poulan 183384 is a robust, high-performance chainsaw that is designed for both professional and home-use applications. It stands out in the market due to its combination of power, durability, and user-friendly features that make it an ideal choice for a variety of cutting tasks, from trimming shrubs to felling larger trees.

One of the main features of the Poulan 183384 is its powerful engine. Equipped with a reliable two-stroke engine, this chainsaw delivers ample power to handle demanding cutting jobs with ease. The high engine speed ensures fast cutting performance, reducing the time needed for each job and making it an efficient tool for both casual users and seasoned professionals.

In terms of design, the Poulan 183384 boasts an ergonomic build that prioritizes user comfort. The handles are designed for a secure grip, which enhances control and reduces fatigue during extended periods of use. Additionally, its lightweight construction makes it easy to maneuver, allowing for better handling and precision while cutting.

Safety features are crucial in chainsaw operation, and the Poulan 183384 does not disappoint. It is equipped with a chain brake that instantly stops the chain rotation in the event of kickback, minimizing the risk of accidents. The chainsaw also features an adjustable oil pump, which allows users to control the amount of oil distributed to the chain, ensuring optimal lubrication and extending the life of both the chain and the bar.

The innovative anti-vibration technology integrated into the Poulan 183384 minimizes vibrations during operation, enhancing user comfort and control. This technology is particularly beneficial for users who need to work for extended periods, as it helps reduce strain on the hands and arms, ultimately making the task more enjoyable.

Maintenance is made easy with the Poulan 183384, as it features a tool-less chain tensioning system. This allows users to adjust the chain tension quickly and without the need for additional tools, ensuring that the chainsaw is always ready for optimal performance.

Overall, the Poulan 183384 stands as a reliable, efficient, and user-friendly option for anyone in need of a powerful chainsaw. Whether for professional landscaping, forestry work, or simply maintaining a home garden, it is equipped to handle a wide variety of tasks with precision and ease.
Top Page Image Contents