Poulan 404402, 960420022 manual To Level Mower

Page 20

SERVICE AND ADJUSTMENTS

•Repeat on opposite side of tractor.

•Turn steering wheel to position wheels straight for- ward.

•ATTACH FRONT LINK (E) - Work from left side of trac- tor. Insert rod end of link assembly through front hole in tractor front suspension bracket (F) and secure with retainer spring (G) through hole in link located behind the bracket.

•Insert other end of link (E) into hole in front mower bracket

(H) and secure with washer and retainer spring (J).

EH J

F

G

FIG. 22

•Disengage belt tension rod (K) from locking bracket

(L).

•Install belt onto engine clutch pulley (M).

IMPORTANT: Check belt for proper routing in all mower pulley grooves.

M

FIG. 23

•Engage belt tension rod (K) on locking bracket (L).

CAUTION: Belt tension rod is spring loaded. Have a tight grip on rod and engage slowly.

•Raise attachment lift lever to highest position.

•If necessary, adjust gauge wheels before operating mower as shown in the Operation section of this manual.

TO LEVEL MOWER

Make sure tires are properly inflated to the PSI shown on tires. If tires are over or under inflated, it may affect the appearance of your lawn and lead you to think the mower is not adjusted properly.

VISUAL SIDE-TO-SIDE ADJUSTMENT (See Fig. 24)

•With all tires properly inflated and if your lawn appears unevenly cut, determine which side of mower is cutting lower.

NOTE: As desired, you can raise the low side of mower or lower the high side.

•Go to side of mower you wish to adjust.

•With a 3/4" or adjustable wrench, turn lift link adjust- ment nut (A) to the left to lower the mower, or, to the right to raise the mower.

A

Turn nut right

Turn nut left

to raise mower

to lower mower

02948

FIG. 24

NOTE: Each full turn of adjustment nut will change mower height about 3/16".

•Test your adjustment by mowing some uncut grass and visually checking the appearance. Readjust, if neces- sary, until you are satisfied with the results.

20

Page 19 Page 21
Image 20
Page 19 Page 21
Contents PB24H48YT Always Wear EYE Protection During OperationSafety Rules Safe Operation Practices for Ride-On MowersGeneral Operation II. Slope OperationIV. Towing ServiceIII. Children Table of Contents Assembly Unassembled PartsTo Remove Tractor from Carton Unpack CartonCheck Tire Pressure Check Deck LevelnessCheck for Proper Position of ALL Belts Check Brake SystemOperation Know Your Tractor Reverse Operation System ROS on PositionHOW to USE Your Tractor StoppingTo Adjust Mower Cutting Height See Fig To Adjust Gauge Wheels See FigSystem Characteristics To Operate MowerService REMINDER/HOUR Meter Before Starting the EngineTo Operate on Hills Check Engine OIL LevelAutomatic Transmission Warm UP To Start Engine See FigPurge Transmission Mowing Tips Maintenance Before Each USEBattery TractorBrake Operation TiresEngine Cleaning MufflerSpark Plugs IN-LINE Fuel Filter See FigService and Adjustments To Install Mower See FigsTractor See Fig To Remove MowerFirst Install ANTI-SWAY BAR S To Level Mower Tip of the blade To Replace Mower Blade Drive Belt See Fig To Replace Motion Drive Belt See FigTo Start Engine with a Weak Battery See Fig To Check BrakeFront Wheel TOE-IN/CAMBER To Remove Wheel for Repairs See FigTo Adjust Throttle Control Cable To Adjust Choke ControlTo Adjust Carburetor To Replace Headlight BulbStorage OtherFuel System Engine OILTroubleshooting Points Engine dies when Limited Warranty Suggested Guide for Sighting Slopes for Safe Operation Only Ride UP and Down Hill Not Across Hill Degrees MAXParts and Service

960420022, 404402 specifications

The Poulan 960420022,404402 is a well-regarded chainsaw recognized for its blend of performance, durability, and user-friendly features. Manufactured by Poulan, a brand known for its commitment to delivering high-quality outdoor power equipment, this model is designed to meet the needs of both professional landscapers and home users alike.

At the heart of the Poulan 960420022,404402 is its powerful engine. Equipped with a robust two-stroke engine, this chainsaw can produce ample power for cutting through tough wood and tackling various outdoor tasks. The engine is designed with fuel efficiency in mind, allowing users to operate for extended periods without frequent refueling. Its quick-start technology ensures that users can get to work without the frustration of lengthy startup times.

One of the standout features of the Poulan 960420022,404402 is its low-vibration design. This technology not only enhances user comfort during operation but also reduces fatigue, making it ideal for prolonged use. The handle is ergonomically designed to provide a secure grip, ensuring maximum control while cutting.

Another notable characteristic is the chainsaw’s automatic oiler system. This feature provides continuous lubrication to the chain and bar, minimizing wear and ensuring smooth operation. Regular maintenance is simplified, as the tool-free chain tensioning system allows users to easily adjust the chain without the need for additional tools.

Safety is a primary concern for any power tool, and the Poulan 960420022,404402 incorporates several safety features. It includes a chain brake, which acts quickly in the event of kickback, providing an extra layer of protection for users. A transparent fuel tank allows for easy monitoring of fuel levels, further enhancing safety and preventing operational interruptions.

The Poulan 960420022,404402 is compatible with various bar lengths, allowing users to customize their chainsaw for different tasks, from tree trimming to firewood preparation. This adaptiveness makes it a versatile choice for anyone looking to invest in a reliable chainsaw.

In summary, the Poulan 960420022,404402 stands out with its powerful engine, low-vibration design, automatic oiler system, easy chain adjustment, and essential safety features. Whether tackling large projects or performing routine yard maintenance, this chainsaw offers the performance and reliability users expect from a trusted brand.
Top Page Image Contents