Poulan 532 43 88-96, 96018000500 manual To Replace Mower Blade Drive Belt See Fig, To Check Brake

Page 20

SERVICE AND ADJUSTMENTS

TO REPLACE MOWER BLADE DRIVE BELT (See Fig. 20)

The mower blade drive belt may be replaced without tools. Park the tractor on level surface. Engage parking brake.

BELT REMOVAL -

•Place attachment clutch in “DISENGAGED” position.

•Move attachment lift lever forward to lower mower to its lowest position.

•Roll belt off engine pulley.

•Work belt off both mandrel pulleys and idler pulleys.

•Pull belt away from mower.

BELT INSTALLATION -

•Work new belt around both mandrel pulleys and idler pulleys.

•Install new belt into engine pulley groove.

•Make sure belt is inside the belt keeper at the idler and on both sides of the wire belt keeper as shown.

IMPORTANT: CHECK BELT FOR PROPER ROUTING IN ALL MOWER PULLEY GROOVES.

BELT KEEPER

WIRE BELT KEEPER

 

MANDREL

 

PULLEY

 

 

ENGINE

 

PULLEY

IDLER

 

PULLEYS

 

MANDREL

 

PULLEY

02844

 

Fig. 20

TO CHECK BRAKE

If tractor requires more than five (5) feet to stop at highest speed in highest gear on a level, dry concrete or paved surface, then brake must be serviced.

You may also check brake by:

1.Park tractor on a level, dry concrete or paved surface, depress clutch/brake pedal all the way down and en- gage parking brake.

2.Place gear shift lever in neutral (N) position.

The rear wheels must lock and skid when you try to manu- ally push the tractor forward. If the rear wheels rotate, then the brake needs to be serviced. Contact a qualified service center.

TO REPLACE MOTION DRIVE BELT (See Fig. 21)

Park the tractor on level surface. Engage parking brake. For assistance, there is a belt installation guide decal on bottom side of left footrest.

BELT REMOVAL -

•Remove mower (See “TO REMOVE MOWER” in this section of manual).

NOTE: Observe entire motion drive belt and position of all belt guides and keepers.

•Remove belt from stationary idler and clutching idler.

•Remove belt downward from around engine pulley.

•Pull belt slack toward rear of tractor. Remove belt upwards from transaxle pulley by deflecting belt keep- ers.

•Remove belt from center span keeper and pull belt away from tractor.

BELT INSTALLATION -

•Carefully work new belt down between transaxle belt keepers and onto the input pulley.

•Slide belt into the center span keeper.

•Pull belt toward front of tractor and roll around the top groove of engine pulley.

•Install belt through stationary idler and clutching idler.

•Make sure belt is in all pulley grooves and inside all belt guides and keepers.

•Install mower (See “TO INSTALL MOWER” in this sec- tion of manual).

ENGINE

PULLEY

CLUTCHING

IDLER

STATIONARY

IDLER

CENTER SPAN

KEEPER

TRANSAXLE

PULLEY

Fig. 21

20

Page 19 Page 21
Image 20
Page 19 Page 21
Contents PO15538LT Safety Rules Safe Operation Practices for Ride-On MowersGeneral Operation II. Slope OperationIV. Towing ServiceIII. Children Table of Contents Unassembled Parts Steering WheelAssembly Tools Required for AssemblyTo Remove Tractor from Carton Before Removing Tractor from SkidCheck Deck Levelness Check for Proper Position of ALL BeltsCheck Brake System Check Tire PressureOperation Know Your Tractor HOW to USE Your Tractor Reverse Operation System ROS To Operate on HillsTo Transport Towing Carts and Other AttachmentsBefore Starting the Engine Check Engine OIL LevelADD Gasoline To Start Engine See FigMowing Tips Maintenance General RecommendationsBattery TractorBlade Care Blade Removal See FigEngine IN-LINE Fuel Filter See Fig CleaningEngine Cooling System See Fig To Remove Mower See Fig Service and AdjustmentsTo Install Mower See Fig To Level Mower Housing SIDE-TO-SIDE Adjustment See FigsTo Replace Motion Drive Belt See Fig To Replace Mower Blade Drive Belt See FigTo Check Brake Transaxle Gear Shift Lever Neutral Adjustment See Fig To Adjust Steering Wheel AlignmentTo Start Engine with a Weak Battery See Fig Front Wheel TOE-IN/CAMBERTo Adjust Throttle Control Cable To Adjust Choke ControlTo Adjust Carburetor To Replace Headlight BulbStorage OtherFuel System Engine OILTroubleshooting Points Excessive Service Notes Suggested Guide for Sighting Slopes for Safe Operation Only Ride UP and Down Hill Not Across Hill Degrees MAXLimited Warranty

532 43 88-96, 96018000500 specifications

The Poulan 96018000500,532 43 88-96 is a versatile and powerful tool designed for various outdoor tasks, particularly for homeowners and landscaping professionals. This particular model stands out due to its robust performance and user-friendly features.

One of the notable characteristics of the Poulan 96018000500 is its powerful engine, which is engineered to deliver reliable performance for a range of applications. This engine not only provides sufficient power to handle tough cutting jobs but also ensures fuel efficiency, allowing users to complete their tasks without frequent refueling interruptions.

In addition to its engine, the Poulan 96018000500 incorporates advanced technology that enhances its usability. The tool features an intuitive starting mechanism that simplifies the ignition process, making it easier for users to start the machine with minimal effort. This is particularly beneficial for those who may not have extensive experience with outdoor equipment.

The design of the Poulan 96018000500 is also noteworthy. It features an ergonomic handle that provides a comfortable grip and reduces user fatigue during extended use. This is an important consideration for landscaping work, where operators may be required to use the tool for long periods. The lightweight construction of the equipment contributes to its maneuverability, allowing users to work efficiently in various terrains.

Durability is another key characteristic of the Poulan 96018000500. Constructed with high-quality materials, this tool is built to withstand harsh outdoor conditions and resist wear and tear. This reliability ensures that users can depend on their equipment for years without compromising performance.

Moreover, the Poulan 96018000500 is designed for versatility. It is compatible with a range of attachments, allowing users to convert it for different tasks such as trimming, edging, and blowing debris. This adaptability makes it an essential addition to any homeowner's toolkit or professional landscaper's arsenal.

In summary, the Poulan 96018000500,532 43 88-96 combines power, efficiency, and user-centric design, making it a standout choice for outdoor maintenance. With its advanced starting technology, ergonomic features, and durability, this tool meets the demands of both casual users and professionals alike. Whether tackling simple yard maintenance or more demanding landscaping tasks, the Poulan 96018000500 proves to be a reliable partner in enhancing outdoor spaces.
Top Page Image Contents