Poulan 96061015703, PP16H36RB, 960 61 01-57 Purge Transmission, Mulching Mowing Tips, Ning

Page 16

OPERATION

•Place the motion control lever in neutral. Release the parking brake and let the clutch/brake slowly return to operating position.

•Allow one minute for transmission to warm up. This can be done during the engine warm up period.

•Theattachmentscanalsobeusedduringtheenginewarm- up period after the transmission has been warmed up.

NOTE: If at a high altitude (above 3000 feet) or in cold temperatures (below 32° F) the carburetor fuel mixture may need to be adjusted for best engine performance. See “TO ADJUST CARBURETOR” in the Service and Adjustments section of this manual.

PURGE TRANSMISSION

CAUTION: Never engage or disengage freewheel lever while the engine is run-

ning.

To ensure proper operation and performance, it is recom- mended that the transmission be purged before operating tractor for the first time. This procedure will remove any trapped air inside the transmission which may have de- veloped during shipping of your tractor.

IMPORTANT: SHOULD YOUR TRANSMISSION REQUIRE REMOVAL FOR SERVICE OR REPLACEMENT, IT SHOULD BE PURGED AFTER REINSTALLATION BEFORE OPERATING THE TRACTOR.

•Place tractor safely on a level surface - that is clear and open - with engine off and parking brake set.

•Disengage transmission by placing freewheel control in freewheeling position (See “TO TRANSPORT” in this section of manual).

•Sitting in the tractor seat, start engine. After the engine is running, move throttle control to slow position. With motion control lever in neutral (N) position, slowly dis- engage clutch/brake pedal.

CAUTION: At any time, during step 4, there may be movement of the drive wheels.

•Move motion control lever to full forward position and hold for five (5) seconds. Move lever to full reverse position and hold for five (5) seconds. Repeat this procedure three (3) times.

•Move motion control lever to neutral (N) position. Shut- off engine and set parking brake.

•Engage transmission by placing freewheel control in engaged position (See “TO TRANSPORT” in this sec- tion of manual).

•Sitting in the tractor seat, start engine. After the engine is running, move throttle control to half (1/2) speed. With motion control lever in neutral (N) position, slowly disengage clutch/brake pedal.

•Slowly move motion control lever forward, after the tractor moves approximately five (5) feet, slowly move motion control lever to reverse position. After the trac- tor moves approximately five (5) feet return the mo- tion control lever to the neutral (N) position. Repeat this procedure with the motion control lever three (3) times.

MOWING TIPS

•Mower should be properly leveled for best mowing per- formance. See “TO LEVEL MOWER HOUSING” in the Service and Adjustments section of this manual.

•The left hand side of mower should be used for trim- ming.

•If grass is extremely tall, it should be mowed twice to reduce load and possible fire hazard from dried clip- pings. Make first cut relatively high; the second to the desired height.

•Do not mow grass when it is wet. Wet grass will plug mower and leave undesirable clumps. Allow grass to dry before mowing.

•Always operate engine at full throttle when mow- ing to assure better mowing performance and proper discharge of material. Regulate ground speed by se- lecting a low enough gear to give the mower cutting performance as well as the quality of cut desired.

•When operating attachments, select a ground speed that will suit the terrain and give best performance of the attachment being used.

MULCHING MOWING TIPS

IMPORTANT: FOR BEST PERFORMANCE, KEEP MOWER HOUSING FREE OF BUILT-UP GRASS AND TRASH. CLEAN AFTER EACH USE.

•The special mulching blade will recut the grass clippings many times and reduce them in size so that as they fall onto the lawn they will disperse into the grass and not be noticed. Also, the mulched grass will biodegrade quickly to provide nutrients for the lawn. Always mulch with your highest engine (blade) speed as this will provide the best recutting action of the blades.

•Avoid cutting your lawn when it is wet. Wet grass tends to form clumps and interferes with the mulching action. The best time to mow your lawn is the early afternoon. At this time the grass has dried the newly cut area will not be exposed to direct sunlight.

•For best results, adjust the mower cutting height so that the mower cuts off only the top one-third of the grass blades (See Fig. 15). For extremely heavy mulching, re- duce your width of cut on each pass and mow slowly.

MAX 1/3

mulcher_9

Fig. 15

•Certain types of grass and grass conditions may require that an area be mulched a second time to completely hide the clippings. When doing a second cut, mow across or perpendicular to the first cut path.

•Change your cutting pattern from week to week. Mow north to south one week then change to east to west the next week. This will help prevent matting and graining of the lawn.

Your transmission is now purged and now ready for normal operation.

16

Page 15 Page 17
Image 16
Page 15 Page 17
Contents PP16H36RB Safety Rules Safe Operation Practices for Ride-On MowersGeneral Operation II. Slope OperationIII. Children ServiceIV. Towing Table of Contents Unassembled Parts 3EATAttery +EYAssembly Tools Required for AssemblyTo Remove Tractor from Carton Before Removing Tractor from SkidInstall Seat See Fig To Install Bagger Components to Tractor See Figs A-4D To Assemble Bagger See Figs A-5CBagger Adjustment See Horizontal AdjustmentVertical Adjustment To Assemble and Install Mulcher Plug See FigCheck Tire Pressure Check Deck LevelnessCheck for Proper Position of ALL Belts Check Brake SystemOperation Know Your Tractor HOW to USE Your Tractor Using the Reverse Operation System To Operate Mower See FigReverse Operation System ROS To Operate on HillsService REMINDER/HOUR Meter Before Starting the EngineCheck Engine OIL Level ADD GasolineMowing Tips Purge TransmissionMulching Mowing Tips NingTo Convert Mower See Fig To Dump Bagger SeeBagging see Fig Maintenance Lubrication ChartTractor Star Pattern Blade See FigBlade Care See Fig Check Operator Presence SystemEngine Cleaning Service and Adjustments To Install Mower See FigTo Level Mower Housing To Remove Mower See FigTo Replace Mower Blade Drive Belt See Fig Belt InstallationBelt Removal Transmission REMOVAL/REPLACEMENT Transaxle Motion Control Lever Neutral ADJUSTMENTSee FigTo Check Brake To Replace Motion Drive Belt See FigTo Adjust Steering Wheel Alignment To Adjust Throttle Control CableTo Adjust Carburetor Front Wheel TOE-IN/CAMBERStorage OtherFuel System Engine OILTroubleshooting Points With attachment clutch Repair Parts SchematicElectrical KEY Part Description 532 17Chassis and Enclosures 532 40 532 42Drive 817 49 Steering Assembly 532 19 Steering Wheel Seat Assembly Decals Wheels & TiresEngine Tank Fuel Mower 532 19 Mower Lift 532 17 Link Front532 16 52-49 Tube Handle Bagger CRD Bagger532 41 Service Notes Suggested Guide for Sighting Slopes for Safe Operation Only Ride UP and Down Hill Not Across Hill Degrees MAX

960 61 01-57, 96061015703, PP16H36RB specifications

The Poulan PP16H36RB, model number 96061015703, is a robust and versatile lawn mower designed to tackle various landscape maintenance tasks with ease. It embodies a powerful combination of features and technologies that cater to both novice and experienced users, making lawn care an enjoyable and efficient chore.

At the heart of the Poulan PP16H36RB is a reliable 16 horsepower Briggs & Stratton engine, ensuring ample power to navigate tough terrain and handle thick grass effortlessly. The engine is designed for efficiency and longevity, providing smooth operation and requiring minimal maintenance. This engine is paired with a user-friendly electric start feature, allowing for quick and hassle-free ignition.

One of the standout features of this model is its wide cutting deck, which measures 36 inches. This generous width enables the mower to cover more ground in a single pass, significantly reducing mowing time. The cutting deck is equipped with durable, sharp blades that provide a clean, precise cut, promoting a healthy lawn. The mower also offers multiple cutting height adjustments, ranging from 1.5 to 4 inches, allowing users to customize their mowing to suit different grass types and personal preferences.

The Poulan PP16H36RB is designed for comfort and control, featuring an ergonomic, fully adjustable seat that supports the user during long mowing sessions. The mower is equipped with a smooth hydrostatic transmission that allows for seamless speed control. This feature enhances maneuverability around obstacles such as trees and flowerbeds, ensuring that users can maintain their lawns without missing a spot.

Safety is also a priority in the design of the PP16H36RB. The mower includes essential safety features such as automatic blade disengagement, which stops the blades when the user leaves the seat, preventing accidents. The sturdy frame and reliable construction ensure that users can navigate rough terrain without compromising stability or safety.

In conclusion, the Poulan PP16H36RB, with its powerful engine, wide cutting deck, and user-friendly features, stands out as a dependable choice for anyone looking to maintain their yard effortlessly. It combines comfort, efficiency, and safety, making it an excellent investment for achieving a beautifully manicured lawn. With the Poulan PP16H36RB, lawn care becomes less of a chore and more of a pleasure.
Top Page Image Contents