Poulan 960 61 01-57, PP16H36RB To Dump Bagger See, To Convert Mower See Fig, Bagging see Fig

Page 17

OPERATION

TO DUMP BAGGER (See Fig.16)

Your tractor is equipped with a Dump Bag Alarm. To turn off the alarm disengage the attachment clutch switch.

•Position tractor in location you wish to dump bagger.

•Place motion control lever in Neutral position and set parking brake.

•Raise dump handle to its highest position. Pull handle forward to raise bagger and dump clippings.

•To continue mowing, be sure bagger is down and in proper operating position which will allow mower to operate.

02207

Fig. 16

TO CONVERT MOWER (See Fig. 17)

(Converting to mulching or rear discharging will require a mulcher plug and discharge deflector)

MULCHING (Requires mulcher plug)

•Place deck into the high cut position.

•Remove bagger or optional rear discharge deflector.

•Unhook the two (2) straps and remove discharge chute

•Insert mulcher plug and handle assembly through back plate and onto the mower deck chute adaptor.

•Secure the plug assembly by connecting the two straps over the handle and hook into the holes provided .

•Replace bagger or optional rear discharge deflector to allow mower to operate.

You are now ready to begin mulching.

MULCHER PLUG

31

023

Fig. 17

BAGGING (see Fig. 18)

•Place deck into the high cut position.

•Remove the rear discharge deflector or mulching plug.

•Insert the discharge chute into the opening in the backplate and onto the mower deck adaptor.

•Attach the chute to the tractor by hooking the two straps to the flange of the chute.

NOTE: The strap hook must go through the discharge chute only. Do not allow the hook to enter the slot in the tractor back plate. If it does, the discharge chute will not float with the mower deck when mowing on uneven terrain.

•Install bagger onto tractor.

DISCHARGE

CHUTE

HOOK

0230

6

BACKPLATE

 

 

SLOT

Fig. 18

REAR DISCHARGING (optional accessory required)

•Place deck into the high cut position.

•Remove bagger and mulching plug (if installed).

•Depress rear door and install discharge chute through opening in backplate and slide over deck adaptor.

•Attach the chute by hooking the two straps into the holes in the flange of the chute.

NOTE: The strap hook must go through the discharge chute only. Do not allow the hook to enter the slot in the tractor back plate. If it does, the discharge chute will not float with the mower deck when mowing on uneven terrain.

•Install the discharge deflector to the backplate by screw- ing the four (4) wing screws into the threaded inserts located in the backplate.

•Tighten the wing screws securely.

17

Page 16 Page 18
Image 17
Page 16 Page 18
Contents PP16H36RB Safe Operation Practices for Ride-On Mowers Safety RulesGeneral Operation II. Slope OperationIV. Towing ServiceIII. Children Table of Contents 3EAT Unassembled PartsAttery +EYTools Required for Assembly AssemblyTo Remove Tractor from Carton Before Removing Tractor from SkidInstall Seat See Fig To Assemble Bagger See Figs A-5C To Install Bagger Components to Tractor See Figs A-4DHorizontal Adjustment Bagger Adjustment SeeVertical Adjustment To Assemble and Install Mulcher Plug See FigCheck Deck Levelness Check Tire PressureCheck for Proper Position of ALL Belts Check Brake SystemOperation Know Your Tractor HOW to USE Your Tractor To Operate Mower See Fig Using the Reverse Operation SystemReverse Operation System ROS To Operate on HillsBefore Starting the Engine Service REMINDER/HOUR MeterCheck Engine OIL Level ADD GasolinePurge Transmission Mowing TipsMulching Mowing Tips NingBagging see Fig To Dump Bagger SeeTo Convert Mower See Fig Lubrication Chart MaintenanceStar Pattern Blade See Fig TractorBlade Care See Fig Check Operator Presence SystemEngine Cleaning To Install Mower See Fig Service and AdjustmentsTo Level Mower Housing To Remove Mower See FigBelt Removal Belt InstallationTo Replace Mower Blade Drive Belt See Fig Transaxle Motion Control Lever Neutral ADJUSTMENTSee Fig Transmission REMOVAL/REPLACEMENTTo Check Brake To Replace Motion Drive Belt See FigTo Adjust Throttle Control Cable To Adjust Steering Wheel AlignmentTo Adjust Carburetor Front Wheel TOE-IN/CAMBEROther StorageFuel System Engine OILTroubleshooting Points With attachment clutch Schematic Repair PartsElectrical 532 17 KEY Part DescriptionChassis and Enclosures 532 42 532 40Drive 817 49 Steering Assembly 532 19 Steering Wheel Seat Assembly Wheels & Tires DecalsEngine Tank Fuel Mower 532 19 532 17 Link Front Mower Lift532 41 Bagger532 16 52-49 Tube Handle Bagger CRD Service Notes Only Ride UP and Down Hill Not Across Hill Degrees MAX Suggested Guide for Sighting Slopes for Safe Operation

960 61 01-57, 96061015703, PP16H36RB specifications

The Poulan PP16H36RB, model number 96061015703, is a robust and versatile lawn mower designed to tackle various landscape maintenance tasks with ease. It embodies a powerful combination of features and technologies that cater to both novice and experienced users, making lawn care an enjoyable and efficient chore.

At the heart of the Poulan PP16H36RB is a reliable 16 horsepower Briggs & Stratton engine, ensuring ample power to navigate tough terrain and handle thick grass effortlessly. The engine is designed for efficiency and longevity, providing smooth operation and requiring minimal maintenance. This engine is paired with a user-friendly electric start feature, allowing for quick and hassle-free ignition.

One of the standout features of this model is its wide cutting deck, which measures 36 inches. This generous width enables the mower to cover more ground in a single pass, significantly reducing mowing time. The cutting deck is equipped with durable, sharp blades that provide a clean, precise cut, promoting a healthy lawn. The mower also offers multiple cutting height adjustments, ranging from 1.5 to 4 inches, allowing users to customize their mowing to suit different grass types and personal preferences.

The Poulan PP16H36RB is designed for comfort and control, featuring an ergonomic, fully adjustable seat that supports the user during long mowing sessions. The mower is equipped with a smooth hydrostatic transmission that allows for seamless speed control. This feature enhances maneuverability around obstacles such as trees and flowerbeds, ensuring that users can maintain their lawns without missing a spot.

Safety is also a priority in the design of the PP16H36RB. The mower includes essential safety features such as automatic blade disengagement, which stops the blades when the user leaves the seat, preventing accidents. The sturdy frame and reliable construction ensure that users can navigate rough terrain without compromising stability or safety.

In conclusion, the Poulan PP16H36RB, with its powerful engine, wide cutting deck, and user-friendly features, stands out as a dependable choice for anyone looking to maintain their yard effortlessly. It combines comfort, efficiency, and safety, making it an excellent investment for achieving a beautifully manicured lawn. With the Poulan PP16H36RB, lawn care becomes less of a chore and more of a pleasure.
Top Page Image Contents