To Level Mower

SERVICE AND ADJUSTMENTS

Make sure tires are properly inflated to the PSI shown on tires. If tires are over or under inflated, it may affect the appearance of your lawn and lead you to think the mower is not adjusted properly.

VISUAL SIDE-TO-SIDE ADJUSTMENT (See Fig. 29)

•With all tires properly inflated and if your lawn appears unevenly cut, determine which side of mower is cutting lower.

•With a 3/4" or adjustable wrench, turn lift link adjust- ment nut (A) to the left to lower LH side of mower, or, to the right to raise LH side of mower.

	A
Turn nut right	Turn nut left
to raise mower	to lower mower
02948

Fig. 29

NOTE: Each full turn of adjustment nut will change mower height about 3/16".

•Test your adjustment by mowing some uncut grass and visually checking the appearance. Readjust, if necessary, until you are satisfied with the results.

PRECISION SIDE-TO-SIDE ADJUSTMENT (See Fig. 30)

•With all tires properly inflated, park tractor on level ground or driveway.

CAUTION: Blades are sharp. Protect your hands with gloves and/or wrap blade with heavy cloth.

•Raise mower to its highest position.

•At both sides of mower, position blade at side and measure the distance (A) from bottom edge of blade to the ground. The distance should be the same on both sides.

	02966
A	A

Fig. 30

•If adjustment is necessary, see step in Visual Adjust- ment instructions above.

•Recheck measurements, adjust if necessary until both sides are equal.

FRONT-TO-BACK ADJUSTMENT (See Figs. 31 & 32) IMPORTANT: Deck must be level side-to-side.

To obtain the best cutting results, the mower blades should be adjusted so the front tip is 1/8" to 1/2" lower than the rear tip when the mower is in its highest position.

CAUTION: Blades are sharp. Protect your hands with gloves and/or wrap blade with heavy cloth.

•Raise mower to highest position.

•Position blade so the tip is pointing straight forward. Measure distance (B) to the ground at front and rear tip of the blade.

Fig. 31

•If front tip of blade is not 1/8" to 1/2" lower than the rear tip, go to the front of tractor.

•With an 11/16" or adjustable wrench, loosen jam nut A several turns to clear adjustment nut B.

•With a 3/4" or adjustable wrench, turn front link adjust- ment nut (B) clockwise (tighten) to raise the front of mower, or, counterclockwise (loosen) to lower the front mower.

TIGHTEN ADJUST		LOOSEN
		ADJUST NUT
NUT B TO RAISE
		B TO LOWER
MOWER
	02950	MOWER

LOOSEN JAM NUT A FIRST

Fig. 32

NOTE: Each full turn of the adjustment nut will change mower height about 1/8".

•Recheck measurements, adjust if necessary until front tip of blade is 1/8" to 1/2" lower than the rear tip.

•Hold adjustment nut in position with wrench and tighten jam nut securely against adjustment nut.

433723, 96042012000 specifications

The Poulan 96042012000,433723 is a robust and versatile gas-powered chainsaw designed for both casual users and professional woodworkers. Featuring a powerful engine, this chainsaw is capable of handling a variety of cutting tasks, making it an excellent choice for homeowners and landscapers alike.

One of the standout features of the Poulan 96042012000,433723 is its 42cc 2-cycle engine. This engine is engineered to deliver the perfect balance of power and efficiency, ensuring that you can tackle heavy-duty cutting jobs without overexerting yourself. The chainsaw boasts an impressive bar length commonly around 16 to 18 inches, enabling users to cut through thick branches and logs with ease.

The chainsaw also incorporates advanced technologies that enhance both performance and user experience. One of these technologies is the powerful cooling system, which helps maintain optimal operating temperatures during prolonged use. This feature not only extends the life of the engine but also ensures consistent cutting performance.

Moreover, the Poulan 96042012000,433723 features an automatic oiling system, allowing for effective lubrication of the chain and bar. This system helps to minimize friction, reducing wear and tear on the components, which leads to lower maintenance needs and a longer lifespan for the tool.

User comfort is also a priority in the design of this chainsaw. The ergonomically designed handle provides a secure grip, reducing fatigue during extended use. Coupled with the lightweight construction of the chainsaw, it becomes easy to maneuver, allowing for precise cutting and control in various applications.

Safety is another critical aspect of the Poulan 96042012000,433723. It includes features such as a chain brake for quick stopping power and a low kickback chain, which minimizes the risk of accidents. These safety enhancements make it suitable for users of all skill levels.

In conclusion, the Poulan 96042012000,433723 is a powerful, efficient, and user-friendly chainsaw that is ideal for a wide range of cutting tasks. With its robust engine, advanced technologies, and safety features, it stands out as a reliable tool for both personal and professional use in maintaining and managing outdoor spaces.