Poulan 413437 Before Starting the Engine, To Transport, Towing Carts and Other ATTACH- Ments

Page 13

OPERATION

TO TRANSPORT

Raise attachment lift to highest position with attachment lift control.

When pushing or towing your tractor, be sure gearshift lever is in neutral (N) position.

Do not push or tow tractor at more than five (5) MPH.

NOTE: To protect hood from damage when transporting your tractor on a truck or a trailer, be sure hood is closed and secured to tractor. Use an appropriate means of tying hood to tractor (rope, cord, etc.).

TOWING CARTS AND OTHER ATTACH- MENTS

Tow only the attachments that are recommended by and comply with specifications of the manufacturer of your trac- tor. Use common sense when towing. Too heavy of a load, while on a slope, is dangerous. Tires can lose traction with the ground and cause you to lose control of your tractor.

ADD GASOLINE

Fill fuel tank to bottom of filler neck. Do not overfill. Use fresh, clean, regular unleaded gasoline with a minimum of 87 octane. (Use of leaded gasoline will increase carbon and lead oxide deposits and reduce valve life). Do not mix oil with gasoline. Purchase fuel in quantities that can be used within 30 days to assure fuel freshness.

CAUTION: Wipe off any spilled oil or fuel. Do not store, spill or use gasoline near an open flame.

IMPORTANT: WHEN OPERATING IN TEMPERATURES BELOW32°F(0°C), USE FRESH, CLEAN WINTER GRADE GASOLINE TO HELP INSURE GOOD COLD WEATHER STARTING.

CAUTION: Alcohol blended fuels (called gasohol or using ethanol or methanol) can at- tract moisture which leads to separation and formation of acids during storage. Acidic gas can damage the fuel system of an engine while in storage. To avoid engine problems, the fuel system should be emptied before storage of 30 days or longer. Drain the gas tank, start the engine and let it run until the fuel lines and carburetor are empty. Use fresh fuel next season. See Storage Instructions for additional information. Never use engine or carburetor cleaner products in the fuel tank or permanent damage may occur.

BEFORE STARTING THE ENGINE

CHECK ENGINE OIL LEVEL

The engine in your tractor has been shipped, from the factory, already filled with summer weight oil.

Check engine oil with tractor on level ground.

Remove oil fill cap/dipstick and wipe clean, reinsert the dipstick and screw cap tight, wait for a few seconds, remove and read oil level. If necessary, add oil until “FULL” mark on dipstick is reached. Do not overfill.

For cold weather operation you should change oil for easier starting (See “OIL VISCOSITY CHART” in the Maintenance section of this manual).

To change engine oil, see the Maintenance section in this manual.

TO START ENGINE (See Fig. 7)

When starting the engine for the first time or if the engine has run out of fuel, it will take extra cranking time to move fuel from the tank to the engine.

Sit on seat in operating position, depress clutch/brake pedal and set parking brake.

Place gear shift lever in neutral (N) position.

Move attachment clutch to “DISENGAGED” position.

Move throttle control to choke () position.

NOTE: Before starting, read the warm and cold starting procedures below.

Insert key into ignition and turn key clockwise to “START” position and release key as soon as engine starts. Do not run starter continuously for more than fifteen seconds per minute. If the engine does not start after several attempts, move throttle control to fast position, wait a few minutes and try again. If engine still does not start, move the throttle control back to the choke ( ) position and retry.

WARM WEATHER STARTING (50° F and above)

When engine starts, move the throttle control to the fast position.

The attachments and ground drive can now be used. If the engine does not accept the load, restart the engine and allow it to warm up for one minute using the choke as described above.

COLD WEATHER STARTING ( 50° F and below)

When engine starts, allow engine to run with the throttle control in the choke () position until the engine runs roughly, then move throttle control to fast position. This may require an engine warm-up period from several seconds to several minutes, depending on the tem- perature.

The attachments can also be used during the engine warm-up period.

NOTE: If at a high altitude (above 3000 feet) or in cold temperatures (below 32 F) the carburetor fuel mixture may need to be adjusted for best engine performance. See “TO ADJUST CARBURETOR” in the Service and Adjustments section of this manual.

13

Image 13
Contents Model PB19546LTGeneral Operation Safe Operation Practices for Ride-On MowersII. Slope Operation III. Children ServiceIV. Towing Table of Contents Contents of Hardware Pack To Remove Tractor from Carton Tools Required for AssemblyBefore Removing Tractor from Skid Unpack CartonCheck Battery See Fig Install Seat See FigsCheck Deck Levelness Check Tire PressureCheck for Proper Position of ALL Belts Check Brake SystemOperation Know Your Tractor HOW to USE Your Tractor To Operate Mower See Fig Reverse Operation System ROSTo Operate on Hills To Transport Before Starting the EngineTowing Carts and Other ATTACH- Ments ADD GasolineMowing Tips Lubrication Chart MaintenanceGeneral Recommendations ScheduleBlade Removal See Fig TractorCheck Operator Presence System Check Reverse Operation ROS SystemTo Clean Battery and Terminals BatteryTo Sharpen Blade See Fig BeltsLubrication EngineTo Change Engine OIL see Figs Cleaning To Remove Mower See Fig To Install Mower See FigInstall belt on engine pulley M, in belt keepers G To Level Mower To Replace Mower Drive Belt See Fig Belt InstallationTo Check Brake To Replace Motion Belt Drive See FigTo Start Engine with a Weak Battery See Fig Transaxle Gear Shift Lever NEUTRAL- Adjustment See FigTo Adjust Steering Wheel ALIGN- Ment Front Wheel TOE-IN/CAMBERTo Adjust Choke Control To Adjust Throttle Control CableTo Adjust Carburetor To Replace Headlight BulbFuel System OtherEngine OIL CylindersProblem Cause Correction Troubleshooting PointsEngine dies when Fold Along This Dotted Line Degree Slope Only Ride UP and Down Hill Not Across Hill Degrees MAXPage Page UNE Pliez EST Ceci Degrés Suivant LESDéfectueux est Dépannage DE GuideRalenti Entreposage Moteur Réglages ET RévisionCarrossage Fig la Voir Tionsraparé LES Pour Roues LES Enlever PourAVANT/ Roues DES Convergence 26 .Fig’ENTRAÎNEMENT Courroie Acer Rempl PourFreins LES Vérifier Pour 25 .FIG23 .FIG Tondeuse LA Niveau LE Ajuster Pour22 .FIG 21 .FIG18 .FIG 19 .FIG17 .FIG 16 .FIGReglages ET Revision Courroie LA ET Tondeuse LA InstallerFigs Voir D’ENTRAÎNEMENT Fig Voir Tondeuse LA Enlever PourEntretien Lubrification 12 ET 11 .FIGS LES Voir Moteur DE L’HUILE Changer Pour13 .FIG 12 .FIGFig la Voir Lame LA Affiler Transmission LA DE RefroidissementTrapézoïdales Courroies Bornes LES ET Batterie LA Nettoyer PourLames DES Entretien Fig la Voir Lame LA EnleverEN Fonctionnement DE Système ET Lubrification DE Tableau O I T a D N a M M O C E RUtilisation Chaque Avant Tonte DE Conseils UtilisationMoteur LE Démarrer Pour Disengaged’ESSENCE Réservoir LE Remplir Accessoires AutresMoteur DU D’HUILE Niveau LE Vérifier ET Charrettes DES Remorquer PourArrière Marche EN Fonctionnement Tondeuse LA Utiliser PourTondeuse DE Lames LES Arrêter Pour GEDFig la Voir Arrêter Pour GAZ DES Commande LA Utiliser PourFig la Voir Mentne Tionsta DE Frein LE Engager PourDattachement Propriété la de lendommagement Correctement Sont Courroies LES MontageToutes SI Vérifier Toutes SI Vérifier PA LA DE Tracteur LE Retirer PourCom des fonction la et mentceplalem DesmanConnaître pour mentnetionfonc tionsec la Fig la Voir Batterie LA VérifierPour Exigés Outils LES DU Tracteur LE Sortir PourTionrecdi DE Volant LE Fixer Carton LE DeballerMontar SIN Piezas 28-27 Dépannage DE Guide Sommaire25-20 Réglages ET Révision Tracteurs des sécurité toute Général Entretien’utilisation pour Conseils ’ESSENCE DE Sûre ManipulationLES Dans Fonctionnement PentesTracteurs des sécurité toute en l’utilisation pour Conseils AUX Imprimé

413437, 96042003501 specifications

The Poulan 96042003501,413437 is a robust and versatile lawn mower that combines power, efficiency, and user-friendly features to cater to various lawn care needs. Designed for residential use, this model stands out due to its reliable performance and innovative technologies that enhance both functionality and convenience for homeowners.

One of the key features of the Poulan 96042003501,413437 is its powerful engine. Equipped with a reliable gas engine, it offers sufficient horsepower to tackle dense and overgrown grass, ensuring a clean and even cut every time. The engine starts easily, allowing users to get right to work without any delays. The mower's design also includes a solid cutting deck, which not only provides a wide cutting path for faster mowing but is also durable enough to withstand the rigors of regular use.

Another important feature of this model is its adjustable cutting height. Users can customize the height of the mower blades, making it easy to achieve the desired grass length based on individual lawn requirements and seasonal changes. This flexibility is essential for maintaining a healthy and aesthetically pleasing lawn.

The Poulan 96042003501,413437 also incorporates advanced mulching technology, allowing users to finely chop grass clippings and redistribute them back onto the lawn. This not only saves time by eliminating the need for bagging but also contributes to the lawn's health by returning valuable nutrients to the soil.

Safety features are paramount in the design of the Poulan mower. It includes a safety blade brake that halts the blades' rotation when the user disengages the control handle, preventing any accidental injuries. The mower is also equipped with ergonomic handles that ensure a comfortable grip, reducing fatigue during extended mowing sessions.

In terms of maintenance, the Poulan 96042003501,413437 is designed for easy access to critical components, facilitating routine checks and servicing. This ensures that the mower remains in optimal working condition over time.

Overall, the Poulan 96042003501,413437 is an efficient lawn care solution that combines power, versatility, safety, and ease of maintenance, making it an excellent choice for homeowners looking to maintain their lawns with minimal effort and maximum results. With its thoughtful design and innovative features, it stands as a reliable tool for achieving a beautifully manicured lawn.