Poulan 180200 owner manual Purge Transmission, Mowing Tips

Page 16

OPERATION

PURGE TRANSMISSION

CAUTION: Never engage or disengage freewheel lever while the engine is

running.

To ensure proper operation and performance, it is recom- mended that the transmission be purged before operating tractor for the first time. This procedure will remove any trapped air inside the transmission which may have devel- oped during shipping of your tractor.

I M P O R T A N T : S H O U L D Y O U R T R A N S M I S S I O N REQUIRE REMOVAL FOR SERVICE OR REPLACEMENT, IT SHOULD BE PURGED AFTER REINSTALLATION BEFORE OPERATING THE TRACTOR.

•Place tractor safely on level surface with engine off and parking brake set.

•Disengage transmission by placing freewheel control in freewheeling position (See “TO TRANSPORT” in this section of manual).

•Sitting in the tractor seat, start engine. After the engine is running, move throttle control to slow position. Disengage parking brake

•Depress forward drive pedal to full forward position, hold for five (5) seconds and release pedal. Depress reverse drive pedal to full reverse position, hold for five

(5) seconds and release pedal. Repeat this procedure three (3) times.

NOTE: During this procedure there will be no movement of drive wheels. The air is being removed from hydraulic drive system.

•Shut- off engine and set parking brake.

•Engage transmission by placing freewheel control in driving position (See “TO TRANSPORT” in this section of manual).

•Sitting in the tractor seat, start engine. After the engine is running, move throttle control to half (1/2) speed. Disengage parking brake.

•Drive tractor forward for approximately five feet then backwards for five feet. Repeat this driving procedure three times.

•Your tractor is now purged and now ready for normal operation.

MOWING TIPS

•Mower should be properly leveled for best mowing performance. See “TO LEVEL MOWER HOUSING” in the Service and Adjustments section of this manual.

•The left hand side of mower should be used for trimming.

•Drive so that clippings are discharged onto the area that has been cut. Have the cut area to the right of the machine. This will result in a more even distribution of clippings and more uniform cutting.

•When mowing large areas, start by turning to the right so that clippings will discharge away from shrubs, fences, driveways, etc. After one or two rounds, mow in the opposite direction making left hand turns until finished (See Fig. 12).

•If grass is extremely tall, it should be mowed twice to reduce load and possible fire hazard from dried clip- pings. Make first cut relatively high; the second to the desired height.

•Do not mow grass when it is wet. Wet grass will plug mower and leave undesirable clumps. Allow grass to dry before mowing.

•Always operate engine at full throttle when mowing to assure better mowing performance and proper dis- charge of material. Regulate ground speed by selecting a low enough gear to give the mower cutting perfor- mance as well as the quality of cut desired.

•When operating attachments, select a ground speed that will suit the terrain and give best performance of the attachment being used.

FIG. 12

16

Page 15 Page 17
Image 16
Page 15 Page 17
Contents DPR22H48STB Safety Rules Safe Operation Practices for Ride-On MowersSafety Rules Table of Contents Unassembled Parts Assembly Tools Required for AssemblyHOW to SET UP Your Tractor To Remove Tractor from CartonInstall Seat See Fig Assemble Gauge Wheels to Mower Deck See Fig To Attach Nose Roller See FigInstall Mower and Drive Belt See Figs Check Tire Pressure Check Mower LevelnessCheck for Proper Position of ALL Belts Check Brake SystemOperation Know Your Tractor HOW to USE Your Tractor To Adjust Gauge Wheels See Fig To Operate Mower See FigTo Operate on Hills To Transport See FigsBefore Starting the Engine Check Engine OIL LevelADD Gasoline To Start Engine See FigPurge Transmission Mowing TipsLubrication Chart Customer ResponsibilitiesGeneral Recommendations Before Each USETractor Engine Cleaning MufflerSpark Plugs Engine OIL FilterService and Adjustments To Install MowerTo Level Mower Housing To Remove Mower See FigFRONT-TO-BACK Adjustment See Figs To Replace Mower Drive BeltTo Replace Mower Blade Drive Belt See Fig To Adjust Brake See FigTo Replace Motion Drive Belt See Fig Transmission REMOVAL/REPLACEMENT To Adjust Steering Wheel AlignmentTo Start Engine with a Weak Battery See Fig Front Wheel TOE-IN/CAMBERReplacing Battery See Fig To Remove Hood and Grill Assembly See FigTo Replace Headlight Bulb Interlocks and RelaysTo Adjust Choke Control See Fig To Adjust Throttle Control Cable See FigTo Adjust Carburetor Storage OtherFuel System Engine OILTroubleshooting Points Problem Cause CorrectionOFF Service Notes Schematic Tractor Model Number DPR22H48STCElectrical KEY Part Description Chassis and Enclosures Bracket Fender Drive Transaxle Order parts from Steering Assembly 175118 Bolt Shoulder 7/16-20 Unc 175553 Clip Engine Optional EquipmentSeat Assembly Decals Wheels & TiresMower Lift Mower Deck Washer, Spacer Mower Vented Limited Warranty Suggested Guide for Sighting Slopes for Safe Operation Parts and Service

180200 specifications

The Poulan 180200 is a powerful and efficient chainsaw that caters to a variety of cutting tasks, making it an ideal choice for both residential users and professionals alike. Known for its reliability and performance, the Poulan 180200 harnesses advanced technology to deliver the features that woodworkers, gardeners, and landscapers need.

At the heart of the Poulan 180200 is its robust 18-inch bar and chain, specifically designed for optimal cutting performance. This length strikes a balance between agility and the ability to tackle larger limbs and tree trunks with ease. The chainsaw is powered by a dependable 42cc two-cycle engine, providing sufficient power to handle demanding cutting tasks while ensuring smooth operation.

One of the key features of the Poulan 180200 is its Easy Start system. This innovative technology significantly reduces the effort needed to start the chainsaw, allowing users to get to work quickly and efficiently. This feature is especially beneficial for those who may struggle with traditional pull-start mechanisms. Additionally, the chainsaw is equipped with a primer bulb that draws fuel into the carburetor, further enhancing the starting process.

Safety is a priority with the Poulan 180200. The chainsaw includes several safety features, such as a chain brake that automatically stops the chain in the event of kickback. This feature is crucial for preventing accidents and ensuring user safety during operation. The anti-vibration system also provides a more comfortable cutting experience by reducing the effects of chain vibrations, making it easier to handle for extended periods.

Durability is another characteristic that defines the Poulan 180200. The chainsaw features a metal bumper spike that helps to provide better control and stability during cutting tasks. The high-quality design also ensures longevity, allowing users to rely on the chainsaw for years to come.

In terms of maintenance, the Poulan 180200 is user-friendly. The easy-access air filter and tool-less chain tensioning system make it simple to maintain and adjust the chainsaw for consistent performance. These features cater to users who wish to spend less time on upkeep and more time on their cutting projects.

In summary, the Poulan 180200 is a well-rounded chainsaw that brings together power, efficiency, and safety. With its reliable performance, user-friendly features, and robust design, it is a dependable tool for anyone looking to tackle a range of cutting tasks, whether in the yard or the forest.
Top Page Image Contents