Poulan 180200 owner manual Table of Contents

Page 4

PRODUCT SPECIFICATIONS

GASOLINE CAPACITY

3.5 GALLONS

AND TYPE:

UNLEADED REGULAR

 

 

OIL TYPE (API-SF-SJ):

SAE 30 (above 32°F)

 

SAE 5W-30 (below 32°F)

 

 

 

OIL CAPACITY:

W/ FILTER:

4.0 PINTS

 

W/O FILTER:

3.75 PINTS

 

 

SPARK PLUG:

CHAMPION RC12YC

(GAP: .040")

 

 

 

 

GROUND SPEED (MPH): FORWARD: 0 – 5.5

 

REVERSE:

0 – 2.4

 

 

 

TIRE PRESSURE:

FRONT:

14 PSI

 

REAR:

10 PSI

 

 

CHARGING SYSTEM:

16 AMPS @ 3600 RPM

 

 

 

 

BATTERY:

AMP/HR:

 

30

 

MIN. CCA:

240

 

CASE SIZE:

U1R

 

 

BLADE BOLT TORQUE:

45-55 FT. LBS.

 

 

 

 

CUSTOMER RESPONSIBILITIES

•Read and observe the safety rules.

•Follow a regular schedule in maintaining, caring for and using your tractor.

•Follow the instructions under “Customer Responsibili- ties” and “Storage” sections of this owner’s manual.

WARNING: This tractor is equipped with an internal combustion engine and should not be used on or near any unimproved forest-covered, brush-covered or grass-cov- ered land unless the engine’s exhaust system is equipped with a spark arrester meeting applicable local or state laws (if any). If a spark arrester is used, it should be maintained in effective working order by the operator.

In the state of California the above is required by law (Section 4442 of the California Public Resources Code). Other states may have similar laws. Federal laws apply on federal lands.

A spark arrester for the muffler is available through your nearest authorized service center/department (See RE- PAIR PARTS section of this manual).

CONGRATULATIONS on your purchase of a new tractor. It has been designed, engineered and manufactured to give you the best possible dependability and performance.

Should you experience any problem you cannot easily remedy, please contact your nearest authorized servicecenter/department We have competent, well-trained technicians and the proper tools to service or repair this tractor.

Please read and retain this manual. The instructions will enable you to assemble and maintain your tractor properly. Always observe the “SAFETY RULES”.

TABLE OF CONTENTS

SAFETY RULES

2-3

PRODUCT SPECIFICATIONS

4

CUSTOMER RESPONSIBILITIES

4, 17-20

ASSEMBLY

6-10

OPERATION

11-16

MAINTENANCE SCHEDULE

17

SERVICE AND ADJUSTMENTS

21-26

STORAGE

27

TROUBLESHOOTING

28-29

REPAIR PARTS - TRACTOR

32-45

WARRANTY

46

4

Page 3 Page 5
Image 4
Page 3 Page 5
Contents DPR22H48STB Safety Rules Safe Operation Practices for Ride-On MowersSafety Rules Table of Contents Unassembled Parts Assembly Tools Required for AssemblyHOW to SET UP Your Tractor To Remove Tractor from CartonInstall Seat See Fig Assemble Gauge Wheels to Mower Deck See Fig To Attach Nose Roller See FigInstall Mower and Drive Belt See Figs Check Tire Pressure Check Mower LevelnessCheck for Proper Position of ALL Belts Check Brake SystemOperation Know Your Tractor HOW to USE Your Tractor To Adjust Gauge Wheels See Fig To Operate Mower See FigTo Operate on Hills To Transport See FigsBefore Starting the Engine Check Engine OIL LevelADD Gasoline To Start Engine See FigPurge Transmission Mowing TipsLubrication Chart Customer ResponsibilitiesGeneral Recommendations Before Each USETractor Engine Cleaning MufflerSpark Plugs Engine OIL FilterService and Adjustments To Install MowerTo Level Mower Housing To Remove Mower See FigFRONT-TO-BACK Adjustment See Figs To Replace Mower Drive BeltTo Replace Mower Blade Drive Belt See Fig To Adjust Brake See FigTo Replace Motion Drive Belt See Fig Transmission REMOVAL/REPLACEMENT To Adjust Steering Wheel AlignmentTo Start Engine with a Weak Battery See Fig Front Wheel TOE-IN/CAMBERReplacing Battery See Fig To Remove Hood and Grill Assembly See FigTo Replace Headlight Bulb Interlocks and RelaysTo Adjust Choke Control See Fig To Adjust Throttle Control Cable See FigTo Adjust Carburetor Storage OtherFuel System Engine OILTroubleshooting Points Problem Cause CorrectionOFF Service Notes Schematic Tractor Model Number DPR22H48STCElectrical KEY Part Description Chassis and Enclosures Bracket Fender Drive Transaxle Order parts from Steering Assembly 175118 Bolt Shoulder 7/16-20 Unc 175553 Clip Engine Optional EquipmentSeat Assembly Decals Wheels & TiresMower Lift Mower Deck Washer, Spacer Mower Vented Limited Warranty Suggested Guide for Sighting Slopes for Safe Operation Parts and Service

180200 specifications

The Poulan 180200 is a powerful and efficient chainsaw that caters to a variety of cutting tasks, making it an ideal choice for both residential users and professionals alike. Known for its reliability and performance, the Poulan 180200 harnesses advanced technology to deliver the features that woodworkers, gardeners, and landscapers need.

At the heart of the Poulan 180200 is its robust 18-inch bar and chain, specifically designed for optimal cutting performance. This length strikes a balance between agility and the ability to tackle larger limbs and tree trunks with ease. The chainsaw is powered by a dependable 42cc two-cycle engine, providing sufficient power to handle demanding cutting tasks while ensuring smooth operation.

One of the key features of the Poulan 180200 is its Easy Start system. This innovative technology significantly reduces the effort needed to start the chainsaw, allowing users to get to work quickly and efficiently. This feature is especially beneficial for those who may struggle with traditional pull-start mechanisms. Additionally, the chainsaw is equipped with a primer bulb that draws fuel into the carburetor, further enhancing the starting process.

Safety is a priority with the Poulan 180200. The chainsaw includes several safety features, such as a chain brake that automatically stops the chain in the event of kickback. This feature is crucial for preventing accidents and ensuring user safety during operation. The anti-vibration system also provides a more comfortable cutting experience by reducing the effects of chain vibrations, making it easier to handle for extended periods.

Durability is another characteristic that defines the Poulan 180200. The chainsaw features a metal bumper spike that helps to provide better control and stability during cutting tasks. The high-quality design also ensures longevity, allowing users to rely on the chainsaw for years to come.

In terms of maintenance, the Poulan 180200 is user-friendly. The easy-access air filter and tool-less chain tensioning system make it simple to maintain and adjust the chainsaw for consistent performance. These features cater to users who wish to spend less time on upkeep and more time on their cutting projects.

In summary, the Poulan 180200 is a well-rounded chainsaw that brings together power, efficiency, and safety. With its reliable performance, user-friendly features, and robust design, it is a dependable tool for anyone looking to tackle a range of cutting tasks, whether in the yard or the forest.
Top Page Image Contents