Replacing Battery, To Replace Headlight Bulb

REPLACING BATTERY

WARNING: Do not short battery terminals by allowing a wrench or any other object to contact both terminals at the same time. Before connecting battery, remove metal bracelets, wristwatch bands, rings, etc.

Positive terminal must be connected ﬁrst to prevent sparking from accidental grounding.

1.Lift hood to raised position.

2.Remove terminal guard.

3.Disconnect BLACK battery cable then RED battery cable and carefully remove battery from tractor.

4.Install new battery with terminals in same position as old battery.

5.Reinstall terminal guard.

6.First connect RED battery cable to positive (+) battery terminal with hex bolt and keps nut as shown. Tighten securely.

7.Connect BLACK grounding cable to negative (-) battery terminal with re- maining hex bolt and keps nut. Tighten securely

8.Close terminal access doors.

9.Close hood.

Hex Bolt

Keps Nut

Terminal

Access

Door

Positive (Red) Cable

Terminal	Negative
Guard	(Black)
	Cable

TO REPLACE HEADLIGHT BULB

1.Raise hood.

2.Pull bulb holder out of the hole in the backside of the grill.

3.Replace bulb in holder and push bulb holder securely back into the hole in the backside of the grill.

4.Close hood.

INTERLOCKS AND RELAYS

Loose or damaged wiring may cause your tractor to run poorly, stop running, or prevent it from starting.

•Check wiring. See electrical wiring diagram in the Repair Parts section.

TO REPLACE FUSE

Replace with 20 amp automotive-type plug-in fuse. The fuse holder is located behind the dash.

TO REMOVE HOOD AND GRILL AS- SEMBLY

1.Raise hood.

2.Unsnap headlight wire connector.

3.Stand in front of tractor. Grasp hood at sides, tilt toward engine and lift off of tractor.

4.When replacing hood, be sure to reconnect the headlight wire connector.

Hood

Headlight Wire

Connector

02141

ENGINE

TO ADJUST THROTTLE CONTROL CABLE

The throttle control has been preset at the factory and adjustment should not be nec- essary. Check adjustment as described below before loosening cable. If adjust- ment is necessary, see engine manual.

TO ADJUST CARBURETOR

Your carburetor is not adjustable. If your engine does not operate properly due to suspected carburetor problems, take your tractor to an authorized service center/ department for repair and/or adjustment.

SP24H48YT specifications

The Poulan SP24H48YT is a powerful and versatile lawn tractor designed to meet the needs of homeowners and gardeners who seek an efficient and reliable machine for maintaining their landscapes. With its robust build and user-friendly features, this model aims to simplify lawn care while delivering exceptional performance.

One of the standout features of the Poulan SP24H48YT is its 24 HP Briggs & Stratton engine. This engine provides ample power for cutting through thick grass and tackling tough terrains. The auto transmission allows for smooth and effortless operation, enabling users to “set it and forget it” when it comes to handling different terrains while ensuring a consistent and even cut.

The 48-inch cutting deck is made from high-quality materials, ensuring durability and longevity. The deck is equipped with a mulching capability, which allows grass clippings to be finely cut and returned to the lawn, promoting healthier growth. Users can also adjust the cutting height with ease, offering a range of height settings to achieve the precise look and feel desired for their lawns.

For added convenience, the Poulan SP24H48YT features an easy-to-use dashboard with controls that are intuitive and ergonomic. The steering wheel is designed for comfort, reducing fatigue during long mowing sessions. The high-back seat also adds to the overall comfort, allowing operators to mow for extended periods without discomfort.

This model is built with user-centric technologies such as LED headlights, ensuring visibility during early morning or late evening mowing sessions. Additionally, the reinforced frame and wheels enhance stability and maneuverability, making it easy to navigate around flower beds and obstacles in the yard.

Maintenance is also simplified, as the Poulan SP24H48YT includes an easily accessible oil drain and an air filter that is simple to clean or replace. The machine’s rugged construction is designed to withstand the rigors of regular use, promising years of dependable service.

In summary, the Poulan SP24H48YT lawn tractor combines power, precision, and ease of use in a single package. Its advanced engine, adjustable cutting deck, comfortable design, and thoughtful features make it an excellent choice for homeowners looking to achieve a manicured lawn with minimal effort. Whether for routine mowing or more extensive landscaping tasks, this lawn tractor stands out as a reliable companion in outdoor maintenance.